Jenn-Air Refrigerator Dispensers

Jenn-Air Appliance Parts
Shop By Part Type

Popular Jenn-Air Refrigerator Dispensers

Your Price
$34.83
  In Stock
Dispenser Grille
★★★★★
★★★★★
(5)
PartSelect Number PS11743632
Manufacturer Part Number WP67005636
This drip tray, also known as an overflow grille, is a manufacturer-approved replacement part for your refrigerator. The drip tray catches drips of water from the ice and water dispenser. To replace this part, simply pull out the existing overflow grille, and slide the new one into place.
Installation Instructions
Jeff from Lafayette, LA
Two of the plastic ice/water dispenser hooks were broken from a previous PROFESSIONAL repair and kept falling off.
I ordered a new dispenser and replaced it. It arrived via FEDEX in two days and it took about 10 minutes to replace. Read more...
Your Price
$7.09
  In Stock
Ice Chute Door
★★★★★
★★★★★
(4)
PartSelect Number PS11738536
Manufacturer Part Number WP12562701
This part is the replacement ice chute door for your refrigerator/freezer. It is a round, black part that is approximately 2 ½ inches in diameter. The dispenser ice chute door opens to let ice through when dispensing into a glass or some other container. If the chute door is broken, your refrigerator may not be able to dispense ice properly. Be sure to disconnect the power from your refrigerator before you begin this repair. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.
Fixes these symptoms
Installation Instructions
Janet from Edmonds, WA
Water dispenser got stuck on one function, couldn't get water to work
Removed two screws and took off water dispenser front panel. Unplugged wires to old control board and removed it from brackets holding it to inside of dispenser panel. Aligned and pushed new control (with care to only touch the outside edges of board...cannot touch circuitry which will permanently damage it). Was tricky aligning the board and snapping it back on, but finally got it in place. Repositioned dispenser panel and reattached two screws.
Second problem was the Chute and chute seal had broken off from the hinge chute so it wouldn't open or close when dispensing ice. Was pretty tricky to realign the chute seal to the hinge, but with some paitence and manipulation, was able to reconnect them.
I am REALLY impressed with the detailed drawings I found on PartSelect.com's website. Without these drawings it would have been difficult for me (my husband and son put the parts in, I did the ordering) to know what parts to order. Service was EXCELLENT. I would definitely do business with this company again. Great work!
Read more...
Your Price
$50.77
  In Stock
Ice Dispenser Door Motor
★★★★★
★★★★★
(8)
PartSelect Number PS11749796
Manufacturer Part Number WPW10184813
This part shuts and opens the ice door on the ice dispenser chute.
Fixes these symptoms
  • Door won’t open or close
  • Ice maker won’t dispense ice
  • See more...
Installation Instructions
James from Valrico, FL
Ice wouldn't dispense from the door.
Simple. Removed the outer ice/water dispenser cover with two screws on the bottom, then removed the ice door mechanism and replaced the small sealing door and door motor. Reassembled and tested . Works perfect. Replacing the door was neccessary as the foam gasket was worn and probably leaking air even though the motor was the real problem. I would absolutely recommend changing the door anytime you have to replace any other part. PartSelect is amazing...ordered the parts on Friday, had them in-hand on Sunday...all for less than $3.00 shipping. Will do business with again. Read more...
Your Price
$18.83
  In Stock
Ice Door Assembly
★★★★★
★★★★★
(8)
PartSelect Number PS11743244
Manufacturer Part Number WP61005883
This ice door assembly is a little over three inches in diameter. It is all white in color and it is made entirely of plastic.
Fixes these symptoms
  • Door Sweating
  • Door won’t open or close
  • Ice maker won’t dispense ice
  • See more...
Installation Instructions
Philip from Plantation, FL
Ice dispenser cover flap was broken.
First I unpluged the refrigerator, then I removed the drip shelf (slides out). Then removed the two screws hidden by the drip shelf. Then I removed the control panel by pulling out on the bottom then lifting slightly to to expose the ribbon cable. The circuit boards you see at this point will deliver an electrical shock if the refrigerator is plugged in. I disconnected the ribbon cable form the control (front) panel. Next I removed three screws that hold the chute assembly in place and worked the chute away from the door. Pay attention to the placement of the water line before you remove the chute. The bad flap fell out at this point but it is easy to fiqure out how to place the new one. When putting the chute back in place make sure the arm holding the flap is aligned in the groove of the solenoid plunger and not just setting on top. (I had to do this twice because the chute would not open the first time I put it back together). About a 30 min job because I took it apart the first time to see what was broken. I only needed the flap, the arm it mounts to an the solenoid were not broken. Easy to do and only cost about $16.00 with shipping for the part. Read more...
Your Price
$104.80
  In Stock
Ice Dispenser Solenoid and Door Kit
★★★★★
★★★★★
(10)
PartSelect Number PS2003478
Manufacturer Part Number 12001991
In addition to the solenoid (115V), this kit also comes with a door strike and an ice door assembly. Please be advised the spring and roll pin are not included with this kit.
Fixes these symptoms
  • Door Sweating
  • Door won’t open or close
  • Ice maker not making ice
  • See more...
Installation Instructions
Scott from Walker, LA
Ice Dispenser "round chute" broken side tab, ice/water fountain not working
I could see that a tab was broken from the round chute that opens for ice dispensing and closes to seal off freezer ice chute when not in use. With the tab broken, the round door would not shut to seal the freezer chute and dispensing water would spatter everywhere. I looked for just the round door part, but is only sold in the "Ice dispenser solenoid and door kit" I only had to use the round chute/flap from the kit. The instructions were easy to follow and I had the fridge back working in about 10 minutes. It took me longer to find the right star headed screwdriver that I needed to remove the Maytag star screws (5) total. Because I didn't have to replace the solenoid or the spring mechanism, this was especially easy, and now I have those parts on hand if one day I need them!! Read more...
Your Price
$29.33
  In Stock
Ice and Water Dispenser Actuator Pad
PartSelect Number PS2059378
Manufacturer Part Number 61003804
Once a glass is pressed against the actuator pad it will cause the dispenser to deliver ice or water when activated.
Fixes these symptoms
  • Ice maker dispenses too much ice
  • Leaking
  • Not dispensing water
  • See more...
Installation Instructions
Roger from Northborough, MA
water and ice dispenser won't shut off immediately (sticks "on")
Shut off power, removed the torx screws that hold the dispenser assembly to the freezer door, disconnected "ribbon cable" from keypad and removed the dispenser assembly to counter. Unhooked sides and removed rubber actuator pad, unscrewed limit switch, removed and disconnected 2 wires. Reversed the above with new actuator pad and limit switch. Total time about 20 minutes. Read more...
Your Price
$7.09
  In Stock
Ice Chute Seal
★★★★★
★★★★★
(2)
PartSelect Number PS11738577
Manufacturer Part Number WP12665101
Fixes these symptoms
Installation Instructions
Janet from Edmonds, WA
Water dispenser got stuck on one function, couldn't get water to work
Removed two screws and took off water dispenser front panel. Unplugged wires to old control board and removed it from brackets holding it to inside of dispenser panel. Aligned and pushed new control (with care to only touch the outside edges of board...cannot touch circuitry which will permanently damage it). Was tricky aligning the board and snapping it back on, but finally got it in place. Repositioned dispenser panel and reattached two screws.
Second problem was the Chute and chute seal had broken off from the hinge chute so it wouldn't open or close when dispensing ice. Was pretty tricky to realign the chute seal to the hinge, but with some paitence and manipulation, was able to reconnect them.
I am REALLY impressed with the detailed drawings I found on PartSelect.com's website. Without these drawings it would have been difficult for me (my husband and son put the parts in, I did the ordering) to know what parts to order. Service was EXCELLENT. I would definitely do business with this company again. Great work!
Read more...
Your Price
$5.06
  In Stock
Ice Door Strike
PartSelect Number PS11743245
Manufacturer Part Number WP61005886
This door strike is located within the mechanical components if the ice and water dispenser. With the help of the solenoid, this piece opens and closes the ice dispenser door.
Fixes these symptoms
  • Door won’t open or close
  • Ice maker won’t dispense ice
  • See more...
Installation Instructions
Paul from Taylor, TX
Ice dispenser quit working the trap door was broken
first I remove screws arounf ice/water door dispenser and pulled dispenser away from refrig door to expose ice door assembly. i removed assembly and replaced and put back together. First time I ever did anything like this was pretty easy saved me some $$$$$$$$$$$$$ Read more...
Your Price
$20.92
  In Stock
DOOR-CHUTE
★★★★★
★★★★★
(2)
PartSelect Number PS11740268
Manufacturer Part Number WP2305258
Fixes these symptoms
Installation Instructions
James from Valrico, FL
Ice wouldn't dispense from the door.
Simple. Removed the outer ice/water dispenser cover with two screws on the bottom, then removed the ice door mechanism and replaced the small sealing door and door motor. Reassembled and tested . Works perfect. Replacing the door was neccessary as the foam gasket was worn and probably leaking air even though the motor was the real problem. I would absolutely recommend changing the door anytime you have to replace any other part. PartSelect is amazing...ordered the parts on Friday, had them in-hand on Sunday...all for less than $3.00 shipping. Will do business with again. Read more...
Your Price
$38.47
  In Stock
DRIP TRAY
★★★★★
★★★★★
(1)
PartSelect Number PS11752469
Manufacturer Part Number WPW10305897

Related Parts