My Orders
Jenn-Air Refrigerator Panels
GET YOUR OFFICIAL Jenn-Air PARTS TO ENSURE VICTORY
Popular Jenn-Air Refrigerator Panels
Installation Instructions
Mario from Rockledge, FL
Water on the floor, fridge leak
Back cover was wet in the area of the inlet valve(sign). Water on the floor. 90% of the time is a leaking inlet valve. But it could be frozen water on the drain pan- so I exposed the radiator fins and drain pan and looked. No ice so I went to the valve and opened the copper line valve and waited a few minutes- as soon as water was ca
... Read more
lled by the. Ice maker it leaked. So I went ahead and replaced the valve and after I made sure no leaks were visible I replaced the back cover and continued to observe and all was good. I treated the fridge as a new installation, changed filter and dumped the next two ice buckets. Then I proceeded to demand brownie points.
Read less
Proper alignment often depends on a strong housing that holds and shields the working parts inside. Damage from heat, impact, or normal wear can cause looseness, noise, poor movement, or added stress on nearby components. Check the mounting hardware and inner supports before ordering a replacement. Match the housing to the full model number and parts diagram. Shut down and disconnect the equipment before installation, transfer attached components carefully, and make sure nothing rubs, binds, or shifts after the housing is secured.
Proper alignment often depends on a strong housing that holds and shields the working parts inside. Damage from heat, impact, or normal wear can cause looseness, noise, poor movement, or added stress on nearby components. Check the mounting hardware and inner supports before ordering a replacement. Match the housing to the full model number and parts diagram. Shut down and disconnect the equipment before installation, transfer attached components carefully, and make sure nothing rubs, binds, or shifts after the housing is secured.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Installation Instructions
ian from estero, FL
No Ice
Heating element broke and fried the rest of the parts had to take out the bad parts and put in the new ones and it worked. i have fixed this problem three times now.
Installation Instructions
Chris from Portland, OR
Control buttons would not respond
Used exploded drawing from Partselect to get an idea how to remove the keyboard housing. This was the hardest part since it "snaps" into place in addition to a couple screws.
Once I got it apart, I figured it was either the electrical control board or the keypad itself , so I ordered both. I also ordered a new keyboard housing sinc ... Read more e the keyboard is stuck to the housing with strong adhesive, so this must be replaced with the keyboard.
When I recieived the parts, I tried just replacing the keyboard, and this worked. I adhered the keyboard to the new housing, put it all back together and the fridge works great now. I returned the electrical control board viw USPS priority, and got a refund within 1 week of sending it.
Thanks!
Once I got it apart, I figured it was either the electrical control board or the keypad itself , so I ordered both. I also ordered a new keyboard housing sinc ... Read more e the keyboard is stuck to the housing with strong adhesive, so this must be replaced with the keyboard.
When I recieived the parts, I tried just replacing the keyboard, and this worked. I adhered the keyboard to the new housing, put it all back together and the fridge works great now. I returned the electrical control board viw USPS priority, and got a refund within 1 week of sending it.
Thanks!
Read less
Panel, access
Panel, access