Crosley Dishwasher Fuses
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Crosley Dishwasher Fuses
Your Price
$32.63
In Stock
Crosley Dishwasher Bi-metal Fuse
PartSelect Number PS2360984
Manufacturer Part Number W10258275
This part is used as a safety device to protect the dishwasher circuit from overload. If the temperature gets to high it will shut off the electrical current to the heating unit in the appliance. Also known as Thermal Fuse.
Fixes these symptoms
- Not draining
- Will Not Start
- See more...
Installation Instructions
Douglas from Dallas, GA
would not turn on
I did a search on the website and read the instructions for trouble shooting. I took the inside door off by taking the screws out. I pulled the part and tested it and found it did not in fact have no ampage. I then ordered the part on line. It came in two days, I plugged it in, put the door back together and the total time was about 15-20 minutes. Easy, simple, great instructions and the entire thing only costed me the part itself. It's working great now! And I've never worked on appliances before.
Read more...
Crosley Dishwasher Thermal Fuse
PartSelect Number PS4704481
Manufacturer Part Number W10402110
This is a replacement thermal fuse for your dishwasher. The thermal fuse is sometimes known as the thermal cutoff. The thermal fuse shuts off the dishwasher if the dishwasher shorts out or overheats. If your dishwasher is cutting out during the cycle, or will not start, you may have an issue with your thermal fuse. If your dishwasher control panel does not light up, the first thing you should check is the fuse. Before you begin to repair this part, be sure to disconnect the dishwasher from the power source, as you will be working around electricity.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Robert from BOULDER, CO
Faulty door handle shorted out the fuse.
First electrical power to the dish washer was turned off. The top portion of front door panel was then opened up to expose pocket handle and latch assembly. Old latch assembly was replaced with new latch assembly and a new fuse. The door panel was then re-closed and electrical power turned on.
Read more...
Your Price
$51.61
In Stock
Crosley Dishwasher Thermal Fuse And Harness
2. Remove the 2 screws that attach the door outer cover.
3. Remove the 8 screws that attache the door inner cover.
4. Remove the plastic cover over the electronic controller.
5. Remove the two connections to the thermal fuse.
6. Remove the thermal fuse.
7. Install the new thermal fuse.
Reverse the above steps. Read more...
PartSelect Number PS382828
Manufacturer Part Number 675813
*Please Note - When changing the fuse always use a new wiring harness.
Fixes these symptoms
- Not draining
- Will Not Start
- See more...
Installation Instructions
Jeff from Boaz, KY
Touch pad on dishwasher dead
1. Remove the two screws that attach the bottom cover. 2. Remove the 2 screws that attach the door outer cover.
3. Remove the 8 screws that attache the door inner cover.
4. Remove the plastic cover over the electronic controller.
5. Remove the two connections to the thermal fuse.
6. Remove the thermal fuse.
7. Install the new thermal fuse.
Reverse the above steps. Read more...
Crosley Dishwasher Fuse Thermal
PartSelect Number PS11741258
Manufacturer Part Number WP3368928
This part is used as a safety device to protect the dishwasher circuit from overload. If the temperature gets to high it will shut off the electrical current to the heating unit in the appliance.
Fixes these symptoms
- Not drying dishes properly
- Will Not Start
- See more...
Crosley Dishwasher Use Wpl 99002642
Installation was a breeze. Took off the upper, middle and lower spray arms. Had to loosen screws in filter assembly to remove old manifold. Popped everything into place... had to scrape mineral deposits off clips that support manifold and upper spray arms.
Easy... Read more...
PartSelect Number PS4136852
Manufacturer Part Number 99002642
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
Loretta from Ancram, NY
Dishes were coming out dirty... cloudy and white.
I know that I have very hard water, but am reluctant to get a softener. I hope that changing the "guts" of the water delivery to my dishwasher will help...already replaced the filters which helped too... so far, it's a little better.Installation was a breeze. Took off the upper, middle and lower spray arms. Had to loosen screws in filter assembly to remove old manifold. Popped everything into place... had to scrape mineral deposits off clips that support manifold and upper spray arms.
Easy... Read more...
Crosley Dishwasher Use Wpl 99002753
PartSelect Number PS4136887
Manufacturer Part Number 99002753
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
Gary from Owego, NY
Top washer arm kept falling off
Snapped out the old retainer, snapped in the new. Then snapped in the washer arm. Done. Works great.
Read more...
Related Crosley Dishwasher Parts
- All Crosley Dishwasher parts
- Crosley Dishwasher Brackets and Flanges
- Crosley Dishwasher Caps and Lids
- Crosley Dishwasher Circuit Boards and Touch Pads
- Crosley Dishwasher Dishracks
- Crosley Dishwasher Dispensers
- Crosley Dishwasher Doors
- Crosley Dishwasher Hardware
- Crosley Dishwasher Hinges
- Crosley Dishwasher Hoses and Tubes
- Crosley Dishwasher Latches
- Crosley Dishwasher Panels
- Crosley Dishwasher Pumps
- Crosley Dishwasher Seals and Gaskets
- Crosley Dishwasher Spray Arms
- Crosley Dishwasher Springs and Shock Absorbers
- Crosley Dishwasher Switches
- Crosley Dishwasher Valves
- Crosley Dishwasher Wheels and Rollers
- Crosley Dishwasher Wire Plugs and Connectors