Crosley Dishwasher Brackets and Flanges
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Crosley Dishwasher Brackets and Flanges
Your Price
$15.00
In Stock
Crosley Dishwasher Mounting Bracket
PartSelect Number PS11745496
Manufacturer Part Number WP8269145
The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward. The bracket is made entirely of metal. It is recommended to check all brackets, if applicable, because they often wear at the same rate and both may need to be replaced. This is an OEM part that is sourced from the authentic manufacturer. Tools needed are a pair of needle nose pliers and a screwdriver.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Leaking
- See more...
Installation Instructions
Judith from Essex, MA
Lost dishwasher brackets
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
Read more...
Your Price
$28.42
In Stock
Crosley Dishwasher Side Mounting Bracket Kit
PartSelect Number PS1487167
Manufacturer Part Number 8212560
This mounting kit can be used on solid surface countertops.
Fixes these symptoms
- Door won’t close
- See more...
Installation Instructions
Donald from Mount Washington, KY
Your Price
$12.85
In Stock
Crosley Dishwasher Circulation Pump Motor Bracket
PartSelect Number PS17219471
Manufacturer Part Number 5304534830
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
John from Herndon, VA
replaced dishwasher motor
Single-handedly. Tipped dishwasher on its side for easy access to water and electric connections. Went back together with no problems or leaks, washes quiter than ever.
Read more...
Your Price
$54.24
In Stock
Crosley Dishwasher Spray Arm Mounting Bracket
PartSelect Number PS11741381
Manufacturer Part Number WP3385159
This mount attaches the spray arm to the upper rack.
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
ken from elwood, IN
Broken top mount for spray arm
Had to use a standard flat screw driver to pry off the old mount. used a phillpips head driver to fasten the mount to the spray arm and pushed the new mount in place.
Read more...
Your Price
$20.37
In Stock
Crosley Dishwasher Heating Element Support Bracket
PartSelect Number PS975933
Manufacturer Part Number 154465101
Sold individually.
Your Price
$27.36
In Stock
Crosley Dishwasher Heater Support Bracket
PartSelect Number PS11770271
Manufacturer Part Number W11027055
Fixes these symptoms
- Not drying dishes properly
- See more...
Your Price
$26.82
In Stock
Crosley Dishwasher Dispenser Mounting Bracket
PartSelect Number PS11755103
Manufacturer Part Number WPW10462232
Fixes these symptoms
- Leaking
- Will not dispense detergent
- See more...
Your Price
$26.82
In Stock
Crosley Dishwasher Spray Arm Feed Tube Holder
PartSelect Number PS11741382
Manufacturer Part Number WP3385160
This part holds the spray arm feed tube up.
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
ken from elwood, IN
Broken top mount for spray arm
Had to use a standard flat screw driver to pry off the old mount. used a phillpips head driver to fasten the mount to the spray arm and pushed the new mount in place.
Read more...
Your Price
$42.12
Special Order
Your Price
$20.37
Special Order
Crosley Dishwasher Bracket, Manifold Mou
I bought 2 new brackets and a new wash arm. The new brackets had a smaller aperature than the originals and fit tightly onto the plastic posts, holding the manifold firmly in its proper location. Replacement of the brackets and the new wash arm took less than ten minutes and required no tools! Read more...
PartSelect Number PS4136853
Manufacturer Part Number 99002643
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
Harry from Bensalem, PA
Detached Water Distribution Manifold
The original brackets that hold the water distribution manifold to the back and top of the tub came off the "X-shaped" plastic posts on the tub walls. That caused the upper wash arm to sag down into the travel of the upper dish rack and was broken off when the rack was pushed in.I bought 2 new brackets and a new wash arm. The new brackets had a smaller aperature than the originals and fit tightly onto the plastic posts, holding the manifold firmly in its proper location. Replacement of the brackets and the new wash arm took less than ten minutes and required no tools! Read more...
Related Crosley Dishwasher Parts
- All Crosley Dishwasher parts
- Crosley Dishwasher Caps and Lids
- Crosley Dishwasher Circuit Boards and Touch Pads
- Crosley Dishwasher Dishracks
- Crosley Dishwasher Dispensers
- Crosley Dishwasher Doors
- Crosley Dishwasher Fuses
- Crosley Dishwasher Hardware
- Crosley Dishwasher Hinges
- Crosley Dishwasher Hoses and Tubes
- Crosley Dishwasher Latches
- Crosley Dishwasher Panels
- Crosley Dishwasher Pumps
- Crosley Dishwasher Seals and Gaskets
- Crosley Dishwasher Spray Arms
- Crosley Dishwasher Springs and Shock Absorbers
- Crosley Dishwasher Switches
- Crosley Dishwasher Valves
- Crosley Dishwasher Wheels and Rollers
- Crosley Dishwasher Wire Plugs and Connectors