Whirlpool Wall Oven Elements and Burners
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Whirlpool Wall Oven Elements and Burners
Your Price
$44.23
In Stock
Whirlpool Wall Oven Oven Bake Element 2600w 240v
. Read more...
PartSelect Number PS11740695
Manufacturer Part Number WP308180
The bake element in your oven is the part that provides heat when cooking. If your oven is too hot, or not hot enough, or does not heat evenly, you may need to replace the bake element. This part is 2600 Watts and 240 Volts. It is a closed hinged style bake element which is 15-3/4 inches long and 16-5/8 inches wide. The terminal depth is three inches and they are 1-3/4 inches apart. This part is made of metal and is black in color. Be sure to disconnect power to the oven before completing this repair.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- Oven is too hot
- See more...
Installation Instructions
Joe from Greeley, CO
oven wouldn't heat
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, then removed element and replaced with new. Read more...
Your Price
$62.60
In Stock
Whirlpool Wall Oven Oven Bake Element
PartSelect Number PS11750369
Manufacturer Part Number WPW10207397
The bake element is located at the bottom of the oven and gives off heat in order to bake evenly. If you notice that the element is not heating up or is not cooking evenly, it could be because it is broken or burnt out. All you need for this simple repair is a small screwdriver. To complete this repair, you will need to first turn the oven off (or shut off the house circuit breaker), remove the two screws that are holding the old element in place, remove the two wires from the old part, and then connect them to the new part and screw back into place.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- Oven not heating evenly
- See more...
Installation Instructions
Daniel from Cheraw, SC
I broke the Bake Element while cleaning the oven.
I removed the two screws that held the bake element in place. Next I removed the Bake Element. I had to unscrew the oven to go behind it because when one piece off of the element broke, it slide back behind the oven. I pushed the wire back thru the piece holes, connected the Element, and pushed the element with the wires back through the holes. I rescrewed the element in place and the oven. PartSelect helped me to save this year's Christmas.
Read more...
Your Price
$85.03
In Stock
Whirlpool Wall Oven Dual Surface Element - Front-right
PartSelect Number PS16543522
Manufacturer Part Number W11517959
This is a dual surface element for compatible ranges. If the surface heating element for your range is currently not turning on or has issues heating up or maintaining a heat level, it will need to be replaced. This surface heating element features two burners, one smaller involving an inner 1400W element, and one larger burner involving both the inner and outer ones (3000W). Replacing this dual surface element will require a screwdriver or drill, as well as wire cutters and needle-nose pliers. This surface element is sold as an individual OEM part, so you may need to consider how many heating elements you need before ordering.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
MELISSA from CHAPLIN, CT
Your Price
$38.96
In Stock
Whirlpool Wall Oven Bake Element - 240v 2100w
PartSelect Number PS340505
Manufacturer Part Number 326791
This lower oven bake element is a high-performance heating component designed for electric ranges and wall ovens. Located at the bottom of the oven cavity, it delivers 2100 watts of power at 240 volts to provide consistent heat for baking. Engineered for durability and even heat distribution, this element is a direct replacement for units that are burned out, broken, or producing uneven results. Common symptoms of a failing element include weak or no heat, inconsistent baking, or visible damage. Replacing the bake element restores proper oven function and ensures reliable cooking performance.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- Oven not heating evenly
- See more...
Installation Instructions
Chad from Bloomington, MN
Baking element in oven exploded
Removed the broken element by taking out the two screws in the back wall of the oven and unplugging the wires. Then did reverse to install the new element. Very simple repair job.
Read more...
Your Price
$77.75
In Stock
Whirlpool Wall Oven Bake Element
Remove two Phillips screws, unplug element, reverse for installation.
Did not correct the issue.
After replacing the oven temperature control also, it turned out the control board was the issue all along. Read more...
PartSelect Number PS12348633
Manufacturer Part Number W11182108
This bake element is an OEM replacement part designed for use in select Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef ranges, ovens, and stoves. It is responsible for providing heat at the bottom of the oven, which is essential for proper baking. If your oven is not heating correctly or you're experiencing uneven baking, replacing the bake element is a likely solution. To replace the bake element, always unplug the oven or turn off the house circuit breaker before starting. The element is located at the bottom of the oven, where it supplies the heat for cooking. After removing any oven racks, disconnect the old element from the electrical connections and remove any screws securing it. Install the new element by aligning and securing it in place, then reconnect the wiring. Verify that the new bake element is functioning by testing the oven after restoring power.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- See more...
Installation Instructions
Darin D from MASON, TN
No heat in oven
Broiler worked, Oven did not. Remove two Phillips screws, unplug element, reverse for installation.
Did not correct the issue.
After replacing the oven temperature control also, it turned out the control board was the issue all along. Read more...
Your Price
$90.42
In Stock
Whirlpool Wall Oven Range Broil Element
PartSelect Number PS11747303
Manufacturer Part Number WP9760771
This broil element is a genuine replacement part designed to deliver high-intensity heat from the top of electric ranges and wall ovens. It plays a critical role in broiling by generating consistent heat for browning and cooking food. Compatible with select Whirlpool and related brand models, this component is ideal for restoring functionality when the broil feature fails to produce heat, distributes heat unevenly, or emits unusual odors. The element operates by converting electrical energy into radiant heat, and its failure can result in poor cooking performance or safety concerns. Installation requires disconnecting power, using basic hand tools, and securing the wires to prevent them from slipping into the oven cavity. Always consult your appliance’s manual for model-specific instructions.
Fixes these symptoms
- Element will not heat
- Little to no heat when broiling
- Oven not heating evenly
- See more...
Installation Instructions
david from SANTA FE, TX
Broil element burnt out
It was relatively "easy" at age 74. Needed phillips screwdriver and needle nose pliers (not nut driver). Put 2 binder clips on connection wires so they would not fall back behind oven. Figure I saved about $100-$200 for less than 30 minutes work.
Read more...
Your Price
$103.35
In Stock
Whirlpool Wall Oven Bake Element
PartSelect Number PS11750370
Manufacturer Part Number WPW10207398
This bake element is found on the bottom of the oven.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- Oven not heating evenly
- See more...
Installation Instructions
Tim from Langley, WA
Corroded bake element
Pull it away from the wall and take everything off the back. Unscrew the element cover, cut through the insulation and remove the part. Not easy, watch for sharp sheet metal edges
Read more...
Your Price
$134.64
In Stock
Whirlpool Wall Oven Broil Element
PartSelect Number PS11731333
Manufacturer Part Number W10856603
This broil element supplies heat for cooking purposes and is located in the roof of an oven. If you find there is little to no heat when cooking, a burned-out element, or food is taking too long to cook, these symptoms could be solved by replacing this part. Before starting this replacement, make sure you unplug the range from the power source or shut off from the house circuit breaker. All you need to complete this repair is a Phillips screwdriver. For safety reasons, make sure to wear gloves. Refer to the manual provided by the manufacturer for more instruction.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- Little to no heat when broiling
- See more...
Installation Instructions
Ramona from Mexico, MO
The broiler element started sparking and melting in one spot. I thought it would catch on fire and quickly turned off the oven.
First we unplugged the range. My husband removed the old element using a screw driver. He also removed the back panel on the oven after pulling it out from the wall. He unplugged the broiler prongs and plugged in the new element, put it all back together using the screw driver. We plugged it back in, turned on the oven and it is working great! Simple and easy to do in a short amount of time. Cool!!
Read more...
Your Price
$131.91
In Stock
Whirlpool Wall Oven 6" Surface Element, 1200 W
PartSelect Number PS12348164
Manufacturer Part Number W11171119
Sold individually.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Terry from Rockwall, TX
Surface Element Out
Took 2 screws under front edge of smooth top. Unscrewed ground wire from back of smooth top unit. Unplugged 2 wire bundles, from back. Took bad element out , put in new one. Put back together. About 10 min's tops. Easy peasy.
Read more...
Your Price
$79.98
In Stock
Whirlpool Wall Oven Broil Element - 240v
PartSelect Number PS11743368
Manufacturer Part Number WP660579
This broil element is found on the roof of the oven and has push-on terminals.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- Little to no heat when broiling
- See more...
Installation Instructions
Robert from Baton Rouge, LA
Bake Element Burned Out
Replacement was relatively easy. Oven door was pulled off hinges after removing 2 mounting screws nearest the hinges. After shutting off power at the breaker, screws (2 each) holding elements were removed. Elements were pulled into oven ~ 4 inches exposing wiring and clips. The clips pulled free with just a little wiggling by hand and were easily pushed back on by hand. Then reverse to finish.
Read more...
Related Whirlpool Wall Oven Parts
- Whirlpool Wall Oven Brackets and Flanges
- Whirlpool Wall Oven Circuit Boards and Touch Pads
- Whirlpool Wall Oven Doors
- Whirlpool Wall Oven Ducts and Vents
- Whirlpool Wall Oven Fans and Blowers
- Whirlpool Wall Oven Fuses
- Whirlpool Wall Oven Handles
- Whirlpool Wall Oven Hardware
- Whirlpool Wall Oven Hinges
- Whirlpool Wall Oven Insulations
- Whirlpool Wall Oven Knobs
- Whirlpool Wall Oven Lights and Bulbs
- Whirlpool Wall Oven Motors
- Whirlpool Wall Oven Panels
- Whirlpool Wall Oven Racks
- Whirlpool Wall Oven Seals and Gaskets
- Whirlpool Wall Oven Switches
- Whirlpool Wall Oven Thermostats
- Whirlpool Wall Oven Trims
- Whirlpool Wall Oven Wire Plugs and Connectors