Maytag/Maytag_Thumb/HSDIUUU9.gif
See part 6 in the diagram
Replacing your Whirlpool Range Broil Element play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Broil Element

★★★★★
★★★★★
6 Reviews
$ 100.61   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11731333
Manufacturer Part Number W10856603
Manufactured by Whirlpool
Product Description

Broil Element Specifications

This broil element supplies heat for cooking purposes and is located in the roof of an oven. If you find there is little to no heat when cooking, a burned-out element, or food is taking too long to cook, these symptoms could be solved by replacing this part. Before starting this replacement, make sure you unplug the range from the power source or shut off from the house circuit breaker. All you need to complete this repair is a Phillips screwdriver. For safety reasons, make sure to wear gloves. Refer to the manual provided by the manufacturer for more instruction.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Little to no heat when broiling | Element will not heat | Little to no heat when baking | Oven not heating evenly
This part works with the following products:
Range.
This part works with the following products:
Whirlpool, Amana, Roper, Inglis.
Part# W10856603 replaces these:
AP5999255, 3195063, 8053712, 814431, 9757340, W10308476
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Don
    February 11, 2018
    Replace broiler element. Not getting hot. Just warm. What should i look at next
    For model number Xfef374lvs
    Hi Don, Thank you for your question. The the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check with a multimeter. An oven thermostat is a switch that opens and closes in response to the temperature it senses. It is typically found in the control panel, where a liquid-filled temperature-sensing bulb senses and maintains the internal oven temperature by cycling heat on and off. Before repairs or testing can begin you must disconnect the electricity at the fuse panel, at the circuit breaker panel, or by pulling the plug. Make sure the power is off before proceeding. A jolt from 220 volts can be fatal, use caution! Access the oven thermostat, which is located in different places depending on the make and model: On freestanding ranges, access the thermostat by removing the screws that hold the back panel in place at both ends. On models with front-loading controls, remove the panel and tilt it for access. Be careful not to let the wires disconnect from their components. Some built-in models have a removable backsplash. Lift the backsplash, rest it on the cook top and remove the screws from the backsplash, which holds the rear panel. On wall ovens or eye-level ranges, access the control panel by opening the door and removing the screws that secure it. The screws may be under the exhaust hood or below the control panel. If the control panel is hinged, simply tilt it towards you. On some models both the rear and front control panels must be removed. The screws may be found on the trim and occasionally the trim must be removed. When testing the thermostat switch contacts for continuity, refer to the wiring diagram and remove only those wires being tested - and only one pair at a time. Test switch contact terminals as per your wiring diagram. If the switch lacks continuity at any of the contact terminal points then the entire thermostat switch needs to be replaced. Adjusting the thermostat: Test the oven temperature by placing the tester in the oven's center and leaving it for 30 minutes at 350 degrees. Record the minimum and maximum temperatures of three cycles, then add those figures together, divide the result by six and you have the oven's average temperature. If the average temperature is more than 25 degrees off, try calibrating the thermostat by following your appliance manual instructions for thermostat calibration. Normally, thermostats are calibrated by pulling the oven's thermostat knob off, turning the knob over and adjusting the calibration ring on the back. If your oven doesn't have a calibration ring you may need to replace the thermostat. To remove the thermostat: Disconnect the capillary tube and push it through the back oven wall, being careful not to break the flammable capillary tube wire. Remove the screws that secure the thermostat to the control panel and gently pull the thermostat out, leaving the wires in place. To install a new thermostat, reverse the disassembly procedures (Step 7 above), transferring the wires individually from the old unit to the new. I hope this helps. Thank you and have a great day!

    4 people found this helpful.

    Was this helpful?
    Thank you for voting!
    James Buckley
    November 5, 2021
    Broil element not heating
    For model number WFE371lLVBo
    Hi James, Thank you for contacting us. If the broil element is not heating, the issue may be with the oven sensor. The oven temperature sensor is the part that monitors the oven temperature and signals the electronic control board to turn the elements on and off. Before removing this part from the oven and testing it with a multimeter for continuity, unplug the oven from the electrical outlet. To test the sensor, you will need to reference your owner’s manual to determine what the correct reading should be for your model, as this varies from model to model. To test it for continuity, use a multimeter on the Rx1 setting and touch the terminals with the probes. This test needs to be done with the sensor at room temperature to produce accurate results. If your test results do not meet the manufacturer’s guidelines, you need a replacement temperature sensor. If the sensor is fine, you will need to check the elements, the electronic control board and the wiring between the parts to see which one is causing the issue. We hope this helps! If you have any questions, please let us know.

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Part Videos

      Replacing your Whirlpool Range Broil Element

      Replacing your Whirlpool Range Broil Element play video
      Customer Repair Stories
       Average Repair Rating: 3.9 / 5.0, 8 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        The broiler element started sparking and melting in one spot. I thought it would catch on fire and quickly turned off the oven.
        First we unplugged the range. My husband removed the old element using a screw driver. He also removed the back panel on the oven after pulling it out from the wall. He unplugged the broiler prongs and plugged in the new element, put it all back together using the screw driver. We plugged it back in, turned on the oven and it is working great! Simple and easy to do in a short amount of time. Cool!!
        • Ramona from Mexico, MO
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        29 of 37 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Oven doesn't heat evenly
        Moved the stove out from the wall. Took out the screws from the back and then from the top. I pulled the piece through the back to unplug the clips from the elements. But the wires went back through the openings. So I had to take the back off of the stove to get to the wires to put back through the holes in the stove. Once the clips were back together, I put the back back on the stove. Rebolted the part to the stove and moved it back.
        • Helen from Brush, CO
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          1- 2 hours
        • Tools:
          Screw drivers
        23 of 35 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Broil element burned out
        Very easy . Just removed four screws and removed the back cover. Then just unplugged two clips from the element . The repeated all of my steps in reverse . Be sure to unplug the oven before you start on the project .
        • carlton from lakeland, FL
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        19 of 25 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Broiler element failed
        Slide range out,unplug range,remove rear cover to unplug element wires, open door remove screws inside oven remove element
        • steven from SEDRO WOOLLEY, WA
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        9 of 10 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Broiler element not working
        It went great. I am not very handy, but with a little help from your website reviews, I was able to easily remove the old broiler element and replace it with the new one in less than an hour. I immediately tested it and found that it worked great.
        • Normand from Lincoln, RI
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Screw drivers
        6 of 11 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Sparks flying out of the oven, broiler element melting
        First Things first, unplug unit, remove rear cover with Phillips head screwdriver, disconnect, wires from broiler element which is the top, one, open oven, unscrew top screws first, then two at the back, wiggle out element, then reverse Steps , test repair before putting cover back on. Then ta-da, you saved yourself a $300. Service call to the appliance repair guy.
        • corey from SHAKER HEIGHTS, OH
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        2 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        The large top burner and the oven bake burner elements as well as the oven light had all burned out
        I looked up a how to video on You Tube which I watched and then ordered the appropriate parts which I installed as soon as they arrived. Problem solved.
        Other Parts Used:
        Surface Radiant Element with Limiter Oven Bake Element Light Bulb - 40W
        • John M from STEELTON, PA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Pliers, Screw drivers
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        element not working properly
        Remove 2 screws inside oven holding element . Remove screws holding back panel. Plug wires (2) into new element.Install back panel . Done.
        • PHILIP from NORTH PORT, FL
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          6 Reviews
          4.8
          Filter By Rating:
          • 5 Stars
            5
          • 4 Stars
            1
          • 3 Stars
            0
          • 2 Stars
            0
          • 1 Star
            0
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
              Model Cross Reference
              This part works with the following models:
              PartSelect Number: PS11731333
              Manufacturer Part Number: W10856603
              Brand
              Model Number
              Description
              Amana
              4KAER5500AW0
              Range - 30" ELECTRIC FREESTANDING RANGE
              Amana
              4KAER7685EW0
              Range - ELECTRIC RANGE
              Whirlpool
              4KAER7685EW1
              Maytag
              4KMER7600AW0
              Range - 30" ELECTRIC FREESTANDING RANGE
              Whirlpool
              4KMER7600AW1
              Maytag
              4KMER7685ES0
              Range - ELECTRIC RANGE
              Maytag
              4KMER7685EW0
              Range - ELECTRIC RANGE
              Whirlpool
              4KMER7685EW1
              Whirlpool
              4KWFC120MAW0
              Range
              Whirlpool
              4KWFE7685ES0
              Range - ELECTRIC RANGE
              Whirlpool
              4KWFE7685EW0
              Range - ELECTRIC RANGE
              Whirlpool
              4KWFE7685EW1
              Whirlpool
              4RF302BXEQ1
              Range - Freestanding, Electric
              Whirlpool
              4RF302BXGQ0
              Range - Freestanding, Electric
              Whirlpool
              4RF302BXGQ1
              Range - Freestanding, Electric
              Whirlpool
              4RF302BXKQ0
              Range - Freestanding, Electric
              Whirlpool
              4RF302BXKQ1
              Range - Freestanding, Electric
              Whirlpool
              4RF315PXEQ0
              Range - Freestanding, Electric
              Whirlpool
              4RF315PXGQ0
              Range - Freestanding, Electric
              Whirlpool
              4RF315PXKQ0
              Range - Freestanding, Electric
              Whirlpool
              4RF315PXMQ0
              Range - Freestanding, Electric
              Amana
              ACR2303MFW0
              Range - ELECTRIC FREE STANDING
              Amana
              ACR2303MFW1
              Range - ELECTRIC FREE STANDING
              Amana
              ACR3130BAW0
              Range - ELECTRIC RANGE
              Amana
              ACR4303MEB0
              Range - ELECTRIC RANGE
              Amana
              ACR4303MES0
              Range - ELECTRIC RANGE
              Amana
              ACR4303MEW0
              Range - ELECTRIC RANGE
              Amana
              ACR4303MFB0
              Range - ELECTRIC RANGE
              Amana
              ACR4303MFS0
              Range - ELECTRIC RANGE
              Amana
              ACR4303MFW0
              Range - ELECTRIC RANGE

              Get in touch, we're here to help!

              Open until 1am EST

              Contact Customer Service