Westinghouse Washer Switches
Find your part
Enter your model number or a part number and click "Search"
Popular Westinghouse Washer Switches
Your Price
$117.42
In Stock
Front Load Washer Door Lock and Switch Assembly
2. Unscrew 2 nuts holding top in place in rear of unit using phillips head screwdriver.
3.Slide top back and remove.
4. Open door of washer and unscrew 2 screws holding in door lock unit.
5.Pull out unit from the top and install new unit reconnecting the 3 wire connections. Read more...
PartSelect Number PS12364048
Manufacturer Part Number 131763256
This door lock and switch assembly is manufactured to lock the door on your front load washer to prevent it from opening while it is running. You may need to replace the door lock and switch if the door does not open or lock. Your washer will not start if the door does not lock. This part is also known as a washing machine door lock assembly. As per the manufacturer, some models require a new wire harness and a door strike for this door lock assembly to work on the appliance. The original style lock would require the door lock kit.
Fixes these symptoms
- Leaking
- Lid or door won’t close
- Spins slowly
- See more...
Installation Instructions
DOUG from KING FERRY, NY
Door on washer wouldn't lock or start
1. Unplug unit.2. Unscrew 2 nuts holding top in place in rear of unit using phillips head screwdriver.
3.Slide top back and remove.
4. Open door of washer and unscrew 2 screws holding in door lock unit.
5.Pull out unit from the top and install new unit reconnecting the 3 wire connections. Read more...
Lid Lock Switch
PartSelect Number PS2349336
Manufacturer Part Number 134936800
Fixes these symptoms
- Will Not Start
- See more...
Water Level Pressure Switch
PartSelect Number PS1990814
Manufacturer Part Number 134762000
This part is able to sense the water level in the tub. When the water reaches the desired level, this switch stops the water from flowing in the tub and then the washing program begins.
Installation Instructions
Tyran from Montclair, NJ
Washer gave error code 31
I opening that top from the rear and saw the same part order plugged in then new part attached it properly and then was done.
Read more...
Pressure Switch
PartSelect Number PS1524557
Manufacturer Part Number 134680100
This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.
Installation Instructions
Roger from Dassel, MN
Set wash load size; would begin to agitate at proper time; however would continue to fill with water and overflow.
Removed back cover; pulled knob off front (removed small screw). Removed hose connected to pressure switch. Removed old switch. Electrical connections are numbered 1-2-3, and the part positions are also numbered 1-2-3. Pulled off old, installed new. Reconnected hose. Rehooked screw on front, replace knob and back cover.
Read more...
Related Parts
- All Westinghouse Washer parts
- Westinghouse Washer Brackets and Flanges
- Westinghouse Washer Circuit Boards and Touch Pads
- Westinghouse Washer Hardware
- Westinghouse Washer Hoses and Tubes
- Westinghouse Washer Knobs
- Westinghouse Washer Panels
- Westinghouse Washer Seals and Gaskets
- Westinghouse Washer Springs and Shock Absorbers