Porter Cable Nailer Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Porter Cable Nailer Parts
Your Price
$6.40
In Stock
Porter Cable Nailer Head Valve Body
PartSelect Number PS12417689
Manufacturer Part Number 180450-S
This head valve body regulates airflow within pneumatic nailers, helping generate the pressure needed to drive fasteners effectively. Built from durable materials, it supports consistent tool performance. Replacing a worn or faulty valve can resolve issues such as air leaks, reduced driving power, or failure to fire, restoring reliable operation.
Fixes these symptoms
- Driver won't return
- Leaks air from top
- Won't fire
- See more...
Your Price
$6.40
In Stock
Porter Cable Nailer Piston Ring
PartSelect Number PS18995697
Manufacturer Part Number N905972
Genuine OEM replacement part, this item is sold individually. The purpose of this part is to keep air pressure in the cylinder of the tools listed below. If you have an air leak in your pneumatic tool it is a good practice to replace the O-ring and seals.
Your Price
$6.40
In Stock
Porter Cable Nailer Urethane Retainer
PartSelect Number PS18987708
Manufacturer Part Number 890725
This is a genuine Porter Cable replacement part, it is sold individually. The purpose of the 890725 Retainer is to secure the pins used on the model numbers shown below. It is advised to check the condition of the retainer often, for the reason the do deteriorate over time and can fall off of the pin they are retaining.
Your Price
$6.40
In Stock
Porter Cable Nailer O Ring
PartSelect Number PS12420389
Manufacturer Part Number 180448
This is an authentic Bostitch replacement part used on specific Nailers. This is a Rubber Ring and it is sold individually. O-rings are designed to withstand thousands of pounds of pressure by creating a seal between two or more parts.
Your Price
$6.71
In Stock
Porter Cable Nailer O-ring
PartSelect Number PS18990553
Manufacturer Part Number A00104
O-rings are designed to contain thousands of pounds of pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. There are many causes for O-Ring failure, such as pressure, friction, temperature or chemicals. The most common are: • <u>Extrusion and Nibbling</u> • O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • <u>Abrasion</u> • One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that is too rough, contains grit or is too smooth to allow lubrication. • <u>Over Compression </u> • O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • <u>Heat Hardening</u> • O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity. • <u>Weather/Ozone Cracking</u> • O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.
Your Price
$6.40
In Stock
Porter Cable Nailer Exhaust Deflector
PartSelect Number PS18997093
Manufacturer Part Number P0590000200
This is a Genuine OEM sourced replacement part designed for use with Staplers/Nailers. With this Exhaust Cover you can divert the air in any direction you want. It is made out of Plastic and it is Sold Individually. Please note Flange Nut used to secure the Cover is Sold Separately. To replace this item you would need a Hex Key/Allen Wrench.
Your Price
$6.40
In Stock
Porter Cable Nailer Protective Cover
PartSelect Number PS18987507
Manufacturer Part Number 884443
Genuine OEM replacement part, this item is sold individually. The purpose of the 884443 Protective Cover, is to cover the air inlet coupler, to keep dust and debris from getting inside the Nail Gun or Stapler and contaminating the internal parts. You should cover the coupling when the tool is not being used. They do have a tendency to wear out, it may be a good idea to have one or two extra on hand.
Your Price
$6.40
In Stock
Porter Cable Nailer O-ring
PartSelect Number PS18997335
Manufacturer Part Number S06P001500
This is a Genuine Manufacturer Sourced replacement part designed for Nailers/Staplers. This O-Ring provides an Air-Tight Seal for the Valve Piston. Over time this O-Ring will shrink, become brittle and crack allowing for air leaks. At that time it should be replaced. It is made out of Rubber and it is Sold Individually. Replacing this item you would need Hex Key/Allen Wrench and Pliers to replace this item.
Your Price
$16.48
In Stock
Porter Cable Nailer Piston Driver
PartSelect Number PS18980252
Manufacturer Part Number 180205-K
Genuine OEM replacement part, this item is sold individually. The main purpose of the 180205 Piston/Driver is to strike the fastener in the nose of the nail gun into the material you are nailing. At times this part can bend or break and it will have to be replaced. When you purchase this item it does not include the part number, 180457 Piston Ring.
Your Price
$50.77
In Stock
Porter Cable Nailer Kit-trigger Valve
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved Read more...
PartSelect Number PS12531525
Manufacturer Part Number TVA6
This is a genuine Bostitch replacement part that fits all BT brad nailers and all S32 staplers. If trigger leaks air or if tool misfires often, try replacing trigger valve. This kit contains one (1) each of: valve assembly (including both O-rings), lubricant, spring pin punch, and repair instructions. Please note that two (2) O-rings are included but can also be purchased separately as parts # 106967 and # 86459. O-rings are easily damaged and worn out, causing tool issues, so it\\\'s a good idea to have a backup or two on hand. Only a hammer is needed for this repair.
Installation Instructions
Richard from Bogalusa, LA
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved Read more...
Porter Cable Nailer Appliance Types
Related Porter Cable Nailer Parts
- Porter Cable Nailer Seals and Gaskets
- Porter Cable Nailer Valves
- Porter Cable Nailer Springs and Shock Absorbers
- Porter Cable Nailer Caps and Lids
- Porter Cable Nailer Brackets and Flanges
- Porter Cable Nailer Handles
Popular Porter Cable Nailer Models
Below are the most popular Porter Cable Nailer models we have. Enter your model number in the search box to find your model.
- FN250B 16 Gauge Finish Nailer
- FN250A Finish Nailer
- BN125A Brad Nailer
- FR350A Round Head Framing Nailer
- DA250B 15 Gauge Angle Nailer
- BN200A Brad Nailer
- DA250A 15 Gauge Angle Nailer
- FR350 (Type 3) Round Head Framing Nailer
- FR350 (Type 1) Round Head Framing Nailer
- FR350 (Type 2) Round Head Framer
- FN250C (211190286 and Higher) Finish Nailer
- FN250C (Type 3) Finish Nailer
- FN250C (Type 2) Finish Nailer
- FN250C (Type 1) 16 Ga. 2-1/2" Finish Nailer Kit
- NS100A Narrow Crown Stapler
- RN175A Roofing Nailer
- BN200C (Type 1) Brad Nailer
- BN200C (210910156 AND HIGHER) Brad Nailer
- FC350A (Type 1) Clipped Head Framing Nailer
- FC350A (Type 2) Clipped Head Framing Nailer