Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
dishwasher not draining, dishes dirty
replacing the sensor was simple, just unplug and turn it out, but didn't solve the problem, it's a float sensor that doesn't show up on the tech sheet in the dishwasher or anywhere in troubleshooting on the internet I could find.
Daniel from AUBURN, IN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
January 25, 2019
On the pump diagram part # 410 is called a sensor. Is this the sensor that determines how much water to let in. My unit is overfilling with a e 17 error code. According to Bosch codes that means water flow sensor fault overfilling problem. In my sump next to the filter are 2 sensors, one above the other. One i think is to determine the soil level on the auto cycle. Is the other one the water level sensor?
For model number SHE68T56UC/02
Hello Jim, thank you for your question. The turbidity sensor measures the soil level in the water that is going through the pump and sump. As the soil level increases, the amount of transmitted light decreases. The turbidity sensor measures the amount of transmitted light to determine the turbidity of the wash water. These turbidity measurements are supplied to the dishwasher controller, which makes decisions on how long to wash in all the cycles.The E17 code is indicating the unit is getting too much water into the tub. We would recommend testing or replacing the float switch and water valve first. I hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Justin
November 16, 2021
Where is the float switch located
For model number SHP68T55UC /01
Hello Justin, Thank you for the question. The Float Switch is located on the underside of the appliance below the Float Bowl. We hope this helps!
Hi, my dishwasher is not starting. If I take all water out from the bottom it will start for 20 min about and stop working. Sanitized light is blinking and dishwasher is full with water.
I replaced the drain pump but didn’t fixed the problem.
Could it be a sensor problem?
If I take the water out manually it will start. If I leave a bit water in the machine it will not start.
For model number SHS5AVF5UC
Hi Matt,
Thank you for your question. If your dishwasher will not start, there are some parts that you will need to check to see which one is causing the issue. You will need to check the door lock, the electronic control board, the control panel, the heat pump and the drain pump. We have included a link that you may reference on how to check some of these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
What part number senses water level and tells water valve to close?
For model number SHE53T56UC/02
Hi Brian, thank you for the great question. The float switch, part number PS8737139, shuts the water fill valve off if the water level gets too high before the timed fill cycle ends. We hope this helps!
I’m a bit stumped and would appreciate guidance. The dishwasher displays water tap while running, followed by water leaking to the float and an E15 error.
I checked everything and the drain line is completely clear, and it drains fine when you reset it. I bought new tub seal and door seals from you and installed them. For some reason the tub is still overfilling and then overflowing while running.
Is this a fill level sensor or some other way to control the fill?
For model number Bosch SHE68T55UC/03
Hello Harry, thank you for your inquiry. An E15 error code indicates that the safety switch has detected water in the base of the dishwasher. Your leakage protection system has activated. Check to make sure the water inlet hose and sump seal are not damaged or worn-out and are leading to water leakage. If this does not solve the issue, we would recommend checking the float switch assembly, part number PS8737139. Float switch assembly shuts the water fill valve off if the water level gets too high before the timed fill cycle ends. Good luck with the repair!
I had a e-07 error code at the end of a cycle and the unit was not warm. I replaced the pump/heater and now I get a code e-23 at the beginning of the cycle.
For model number she65t52uc
Hello Terry, Thank you for contacting us. The E23 error code indicates an issue with the drain pump assembly. The E07 error code can also indicate an issue with the draining system. Check for any kinks or clogs in the hoses and check the drain pump and diverter motor with a multimeter to see if they are faulty. Good luck with your repair.
