Display Power Control Board EBR64624906

Hello Martin, Thank you for your question. Yes, you would need to replace the Secondary control board under part PS7792509 for your model to fix the issues with the burners. Hope this helps!

Hello Jack, thank you for writing. This is most likely due to this Display PCB Assembly, part number PS7792509 for your model. It could also be due to the other Display PCB Assembly being faulty, part number PS8751312 for your model. Good luck with your repair!

Hi Jim, Thank you for your question. We do have a 30 day return policy. Parts must be in resalable condition to qualify. All electrical parts must not have been installed. Returned items that have been installed will not be returned to customer. Customer is responsible for shipping returned parts back to PartSelect. Any item received after 60 days of shipment date will not be refunded. I hope this helps. Thank you and have a great day!

Hi Don, Thank you for your question. If the burner is not working correctly when you turn it on the issue is likely the display power control board, part number PS7792509, and it will need to be replaced. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

Hello Stephen, Thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity, then the switch is the issue. For the keypad we recommend the Display Power Control Board part number PS7792509. We hope that helps. Good luck with your repair. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hi Wadean, thank you for your question. Based on our understanding, the issue is probably with the power control board, part number PS7792509, that you mentioned, but before replacing it, we would recommend checking the radiant surface element, part number PS7795472. We hope this solves your problem!

Hello Donald, thank you for getting in touch. According to our research, the error code F9 means that the oven is unable to reach 150 degrees Fahrenheit after 5 minutes of preheating. You may need to replace the temperature sensor, part number PS11732697, to fix the issue. We hope this helps, good luck with this repair!

Hello Chris, thanks for reaching out to us. If your burner and oven buttons are not working, we recommend checking the wiring harnesses throughout the range, to ensure there is no damage and everything is still tightly connected. Don't forget to unplug your range first! If those are all in good condition, it may be that your display board or main PCB assembly is not working properly. If you would like assistance placing an order, please contact Customer Service. Good luck with your repair!

Hello Rick, thank you for your question. There correct Board that controls the Top Burners is PS11773404. Good luck with your repair.

Hello Mathieu, Thank you for contacting us. If it is two of the burners that are not working, then we recommend checking the boards for any visible damage or loose connections. Good luck with your repair.