Maytag/Maytag_Thumb/56478.gif
See part 10 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Broil Element - Push On Terminals

★★★★★
★★★★★
15 Reviews

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS2342087
Manufacturer Part Number W10201551
Manufactured by Whirlpool
Product Description

Broil Element - Push On Terminals Specifications

This broil element is found on the roof of the oven.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat | Little to no heat when broiling | Little to no heat when baking | Oven not heating evenly
This part works with the following products:
Range.
This part works with the following products:
Maytag, Kenmore, Jenn-Air, Whirlpool.
Part# W10201551 replaces these:
AP4365339, 1471986, W10201551, 74004106, 7406P237-60, 7406P474-60
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

7 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Kris
    October 19, 2017
    Can you replace top oven element from the front of oven only. (without taking back cover off).
    For model number JDR8895aAS
    Hi Kris, Thank you for the question. Yes you can reach into the oven and remove the element from the front. Most find it easier to go in through the back, it is easier to reach and you can avoid leaning on the door and damaging the hinges. You just need to reach in and remove the screws from the bracket at the back of the oven and from the bracket that holds the element to the top of the oven. Once the screws are removed you can pull the element out and you will see the wires hooked to the element terminals. I suggest getting a close pin or a clip to hold the wires and prevent them from falling back through the hole and into the back of the appliance.Hope this helps!

    12 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Jim
    November 8, 2019
    My broiler and baking elements are not working. I can identify the baking element part but the list has two broilers. Which one is correct?Ps2342087 ps11752536
    For model number JDR8895AAS
    Hello Jim, Thank you for your question. The broiler element under part PS2342087 is for the upper oven, and the broiler element under part PS11752536 is for the lower oven. Hope this helps!

    5 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Jim
    November 7, 2019
    My broiler and baking elements are not working. I can identify the baking element part but the list has two broilers. Which one is correct?Ps2342087 ps11752536
    Hi Jim, We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long, and could have a mixture of numbers and letters. Thank you for your question and good luck with your repair!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Roger
    January 4, 2020
    I need a broil element for a Kenmore range. The wattage is 1730 w. The part resembles partselect number ps2342087, or partselect number ps439671, or partselect number ps249432. Unless have the actual replacement part, i will have to remove the vertical support assembly from the burnt out element and put in on the new one. I may also have to modify the screw plates for the back wall (2.25" from plate to end of push in connector) (plate for screwing is 2" x 1.75"). Overall length is 17", width 12". I hope you can tell me the right part number that is required. Thanks for your help. Roger
    For model number Sears Range C880 6305091 Serial Number IME 4995782
    Hello Roger and thank you for writing. According to our database, the model number you provided is just a portion of a model number with multiple possible variations. To ensure that we recommend parts that will work for your model, please check your information again; you will need to provide us with the full model and serial numbers located on the sticker on the unit itself. Once we have that information, we would be happy to find the part you need. We cannot find parts based on part dimensions as even parts that are the same size can have small differences that make them incompatible with your model. We strictly match parts to models. Thank you for your question and good luck with your repair! We do carry related parts for units just like yours. For example, part number PS11744518. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Warren
    January 10, 2020
    Cost of one (1) top broiling element?
    For model number MER6755AAB/Q/S/W
    Hello Warren, thank you for your question. The broil element for the upper oven is Part #: PS2342087. Please enter the part number into the site for current price and availability. Good luck with your repair!

    Was this helpful?
    Thank you for voting!
    Bonnie
    December 9, 2017
    The top element in my bottom oven stays on all the time which is causing over heating. We replaced the sensor but the broiler in the bottom oven is still staying on. Should I replace the broiler element?
    For model number JDR8895AAS
    Hello Bonnie, Thanks for your question. Given that you replaced the sensor it is likely the broil element that will need to be replaced. We would recommend doing so. I hope this helps.

    Was this helpful?
    Thank you for voting!
    Sophie
    May 30, 2019
    Do you sell bake element for this model oven?
    For model number P7 Automatic Oven Cleaning
    Hello Sophie, thank you for writing. We would be happy to look into this, but we will need the model number of your oven to do so. We look forward to hearing back from you.

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 4.0 / 5.0, 29 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Upper broiler element (of upper over) burnt out
      This particular model has a bracket that holds the element close to the oven ceiling, so I had to unscrew that as well as the element mounting screws on the back oven wall. The hardest part (not that hard) was the connectors were really tightly clamped to the element terminal. I had to use pliers to help wiggle them off the tips. Recommend doing this very gently yet firmly - I was worried about ruining the connectors or the wires to the oven. The element was deader than dead and actually fell apart in three places once it was detached. The new replacement element arrived a couple days later. Putting it in was a breeze, although the oven is quite dark and I needed Mrs. Handyman to hold a flashlight so I could get the screws in. Oven works fine now.
      • Todd from San Antonio, TX
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      77 of 83 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Broiler element burned out
      1. Turned off the power supply first!
      2. Unscrewed the element brackets at the back of the oven.
      3. Unscrewed the bracket holding it to the top of the oven.
      4. Pulled off the crimp-on leads from the ends.
      5. Because you have to stick both arms all the way into the oven to manipulate the leads, I found it easier to move the oven away from the wall and unscrew the back panel. I could then push the ends of the broiler element through the back and make all the connections from back there. Then I pushed the new element back into the oven and reattached all the screws in reverse order.
      • David from Arlington, VA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      25 of 27 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Element burned out
      Removed screws, pulled out element, disconnected wires, connected new element and screwed it in. 5 minutes tops. Best part is I ordered the part on Tuesday afternoon and it arrived Weds.... great company, Thanks!!
      • Seth from Jay, NY
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      12 of 14 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      oven heating elements were burned out
      I unplugged the oven then, one element at a time, I removed the screws and pulled the connecter out of the sleeve. This was the hardest part as it is a tight fit. Then, reverse the order to replace the element. The upper elements were more work because of the brackets used to hold them in place. But this only took alittle more time to remove and replace each one. When I plugged the oven back in and turned it on everything worked great! Back to baking!
      Other Parts Used:
      Broil Element - 6 Pass Lower Bake Element Upper Bake Element - 240V
      • Theresa from Belfair, WA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Screw drivers
      10 of 16 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Upper broil element starting getting super hot. I think it actually started melting! Obviously had to be replaced.......
      Make sure you unplug your stove before you start! You should probably shut off the power at the breaker box too.

      Since the upper oven is so small, I found that I couldn't reach the connectors well enough to work with them. So I pulled out the whole oven, took the screws off the back cover and from the back I was able to easily reach where the wires connected to the element. Then it was a piece of cake.

      Just use a small knife to unbend the little metal things that hold on to the metal ends of the element. Slide them on to the new element, and crimp them tight with pliers.

      Oh, you also have to take off the bracket on the ceiling of the inside of the oven to get the old element out, and the new one in.

      The oven has been working great!
      • Cameron from La Grange Park, IL
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Pliers, Screw drivers
      7 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Burnt out Broiler Element
      Repair would have only taken minutes, but upper support plate screws were rusted and almost fused to the plate. Once the plate screws were out (had to pry plate out) installation was done in 3-5 minutes.

      As for the replacement part, worked perfect on the first try. Very happy with price, speed of delivery and preformance.
      • Lee from Farmington, MN
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      7 of 9 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      the broiler element was not working
      turn off all electric to the wall oven. removed the old broiler. replaced the new broiler and turned on the electric. checked the brolier one to see if it worked....it did thanks for the customer service for her help in finding the replacement part.
      • Gerald from Maiden, NC
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      3 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Replaced heating element
      Easier than making a pie! Unscrewed 4 screws and detached the element from the back of the small upper oven. Connected the new element and put the 4 screws back in place. We saved $129 service fee by doing this ourselves not to mention the markup on parts. Shipping was very quick! While I hope to not have to do this again...I would do it again in a split second!
      • tracy from north attleboro, MA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      3 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Lower Oven element burn out.
      Our Maytag electric range has a small oven on top that doubles as a toaster, and food warmer. The lower one is a big oven suitable for Thanksgiving Turkey Etc. It is also a broiler as is the top oven. The top one had the bottom element burn out about 5 months back as well. Now the bottom element on the lower oven had burned out as well. The oven has some age on it, but when I looked to replace it I saw it would be approx $1800.00 - $2000.00 for a new one. I knew the elements were replacable and thought if I should call out the lonely guy, the Maytag repairman. Nope, I pulled the stove out disconnected the 220 power supply. I got the Model number off the back stamped info plate. I looked up Maytags parts on Google and the first one was PartSelect.com. They have easy fill-in spaces for Model and Make and a schematic of the oven and all it's pieces are visually displayed. I found the part I needed and ordered. It arrived in two days, very reasonable, very fast shipping. Pulling out the old elements required only a battery operated screw driver, a flash light, and a magnetic dish to keep track of the screws.The removal of the rear panel takes about 10 sheet metal screws. I marked the leads I disconnected by color with a felt tip pen on the back. I disconnected and removed the aforementioned clips, cleaned inside the oven and placed the new element in, reconnected everything on the back as it had been according to my color assignments, replaced the back with battery operated screwdriver from the magnetic dish, reconnected the 220V power supply. Done, in about 30 minutes; I saved a bunch over a new Stove and at least a couple hundred over a service call. Easy and satisfying.
      Other Parts Used:
      Lower Bake Element
      • Joseph from Boerne, TX
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      3 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Top Oven Element broke
      Ordered the part from your company. It arrived promptly. Gave to to my two sons 22 & 29. They fixed it.

      Very easy........................................
      • Susan from Doylestown, PA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Screw drivers
      3 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      15 Reviews
      4.7
      Filter By Rating:
      • 5 Stars
        13
      • 4 Stars
        1
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        1
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS2342087
      Manufacturer Part Number: W10201551
      Brand
      Model Number
      Description
      Kenmore
      22-98002
      Range - Kenmore Range/Stove/Oven Model 22-.98002 (2298002, 22 98002) Parts
      Kenmore
      22-98009
      Range - Kenmore Range/Stove/Oven Model 22-.98009 (2298009, 22 98009) Parts
      Kenmore
      62260002600
      Range
      Kenmore
      62260003600
      Range
      Kenmore
      62260008600
      Range
      Kenmore
      62260009600
      Range
      Kenmore
      62960002600
      Range
      Kenmore
      62960002601
      Range
      Kenmore
      62960002606
      Range
      Kenmore
      62960003600
      Range
      Kenmore
      62960008600
      Range
      Kenmore
      62960008601
      Range
      Kenmore
      62960008606
      Range
      Kenmore
      62960009600
      Range
      Kenmore
      62960009601
      Range
      Kenmore
      62960009606
      Range
      Kenmore
      66598002700
      Range
      Kenmore
      66598002701
      Range
      Kenmore
      66598003700
      Range
      Kenmore
      66598003701
      Range
      Kenmore
      66598009700
      Range
      Kenmore
      66598009701
      Range
      Kenmore
      66598013700
      Range
      Kenmore
      66598013801
      Range
      Kenmore
      66598019700
      Range
      Kenmore
      66598019801
      Range
      Whirlpool
      GGE350LWB00
      Range - Freestanding, Electric 30"
      Whirlpool
      GGE350LWQ00
      Range - Freestanding, Electric 30"
      Whirlpool
      GGE350LWS00
      Range - Freestanding, Electric 30"
      Jenn-Air
      JDR8895AAB
      Range

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service