Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This orange dot heating element replaces those elements with an orange dot on the element flange. It carries 240 volts.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Dennis F - February 18, 2023
Verified Purchase
Perfect fit!
Great buy works so much better now. The video repair walked me right through it. Thanks Dick!
★★★★★
★★★★★
Andrea P - May 25, 2018
Verified Purchase
Great Part, easy install
The part was in good quality & easy to install. My appliance works better then before.
★★★★★
★★★★★
Troy W - May 12, 2021
Verified Purchase
Parts Select is awesome!
Dryer quit heating on Saturday evening. Went to partselect.com for troubleshooting help and part ordering. Part shipped on Monday and had dryer working by Wednesday. Thank you!
★★★★★
★★★★★
Carol M S - September 11, 2022
Verified Purchase
The heating coil was the manufactures exact part
The coil was simple to install after it finely got to me, I ordered it on a Tuesday and received it a week later on Wednesday, this being my only complaint. I think it went to the wrong address.
Part Select will always be my go-to for parts!
★★★★★
★★★★★
Ilan B - September 19, 2018
Verified Purchase
Worked like a charm!
It fit my older Amana dryer and works better than expected. Installation was simple as well.
★★★★★
★★★★★
Heather L - March 27, 2019
Verified Purchase
Worked as hoped
Good condition, quick shipping. Was able to easily replace my old one, and the new one was able to dry a load of clothes in like 30 minutes!
★★★★★
★★★★★
Chris P - January 30, 2023
Verified Purchase
Easy Install! Works great!
Set aside about 2 hours, a Phillips head, and a few sockets. Take your time and the install is a snap! You'll see the problem with the old element right away, so don't think you are not fixing the problem!
★★★★★
★★★★★
Mark R - May 29, 2019
Verified Purchase
Fairly easy repair replacement.
Part in good condition. Came relatively fast.
★★★★★
★★★★★
Brian C - June 10, 2024
Verified Purchase
Fixed the dryer
I received the part very fast and it works great
★★★★★
★★★★★
Gerard L - February 22, 2018
Verified Purchase
Easy repair.
Excellent service and delivery , parts all fit , excellent website .
< Prev
1
2
Next >
Installation Instructions
Average Repair Rating: 3.6 / 5.0, 34 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Bad element
googled make and model number of dryer! Found a trouble shooting comment like my problem! Dryer not getting hot! Watched video on locating and removing element and Hightemp sensor of my model. Then went in and inspected element ! I was able to see that element was bad-had a break in middle. Removed old one and ordered new one! This w
... Read moreas a Sunday night! Had back together after work on Wednesday evening! Total time approx 45 minutes! This includes time researching online and taking two sensors off old element and mounting on new element! Easy fix!
Read less
John from NEWARK, DE
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Excessively long time to dry clothes
Removed lower panel 2 screws, removed blower vent housing 3 screws,reached in to lower left back wall and removed 2 screws and removed the heating element,wires were long enough to reach the front. Replaced thermostat and element and re installed.The vent was loaded with lint .The dryer works like new. Really easy
Very easy repair unplugged drier removed lower panel on front of drier and with a 1/4 socket set with 6 inch extension(long reach to back of drier) removed tw0 mounting screws in element. The wires on element wer longenough that i removed element with wire connected and the simply placed new elemant beside and transfered wires to new elem
... Read moreent. Once wires were transfered slide new element into place and reinstalled 2 mounting screws. Plugged drier in and tested it then replaced front cover once was sure was working properly. Very simple job and for under $50 drier works good as new again.
Read less
roger from pawcatuck, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
heat element
all i had to do and take the tub out and put out the old heat element and put the new one in and put the tub back in and screw all the screws back in and now my dryer drys good now wow.......vincent ebarb from zwolle louisiana(12-05-11)
Vincent from Zwolle, LA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer was not heating up.
The video on the web-site was very helpful in showing how to take it apart. First we remove the power plug from the wall outlet. Then we used flat scrapper to push the top two hidden clips to release the Dryer's top. We used the nut driver to unscrew the two screws that held the front panel. We carefully remove the wires that were connec
... Read moreted to switch sensor for the door, and the lights. Next step was to unscrew couple more screws that held the front piece from the main fan housing. At the bottom locate the tensioner of the belt. Release it. Remove the dryer drum with the belt. We took the opportunity to clean off the lint that was all over on the bottom of the dryer. We then could reach the bottom left back of the dryer to unscrew the screws that held the heater unit. Before that we unscrew and release the wires for the Thermal fuse and the limit thermostat which are all located on the heating unit. Then we replace with new pieces. Upon removal of the heating unit we noticed the broken heating element. Next was to place the drum back in. We made sure that the drum lined up with the rear support piece then the front. We rotated the drum just to make sure that it was sitting correctly. Then we screwed the front housing unit. Then we put the front panel back on the hooks at the bottom. That help to line up the front panel with the main chasis. We connected all the connectors to the right terminals. Last was to set the top down on to the chasis. We checked that the duct in the rear is not obstucted. Lastly was plugging in the power cord and testing the dryer. It is working again. Thanks to Part Select's video and parts. Total time was just over half an hour.
Take front lower cover off with two screws at bottom.Remove heating element from lower left side rear. Leave wires on until element is removed.Replace element and thermostat and then switch the wires from old parts to new parts one at a time so they don't get crossed.Clean any lint from inside dryer at this time.Install new parts back to
... Read moredryer.Replace front cover and your done.
Hi there. . . . The heat element in my dryer had went bad so I went online to fine a part for my dryer that's when I came across partselect I order the part from the them. . . . At a very good price. . . In 2 to 3 days the part were here. . . It 15 to 30 min I had put the heat element in my dryer. Thank you partselect you save alot of
... Read moremoney for me. . . . . . . . I were getthing ready to buy a new dryer. That would have cost me $299. 00 Or $300. 00. I think I can get 5 maybe 10 more years out of my dryer now. R watkins
Read less
ROBERT L from JONESBORO, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heat
Unplug the unit. Tip the machine to the rear, and put a block under the front to gain access the bottom of the front panel. the Remove the 2 screws on the lower front panel, and remove the panel. Remove the 2 screws holding the door assembly. This assembly has clips that hold it on top, so pull out on the bottom, and pull down. Be sur
... Read moree to mark the wires on the door switch. Remove plastic blower box assembly. This is fastened from inside the drum with 3 phillips screws. The heating element and thermal fuse are located in the left rear corner of the machine. Remove 2 screws holding assembly, and pull it out to the front of the machine...the wires are long enough to allow this. The thermal fuse is screwed right to the element. Just lay the elements side by side, and transfer the wires from 1 to the other. Put everything back together in reverse order. My dryer now works like new. This is an easy job for an average handyman.
Remove 2 screws on the front panel at the bottom of the dryer & remove front panel. Remove the black plastic "duct" from blower to lint filter by removing 3 screws. Heating element is on the back wall of the dryer in the lower left corner. 2 screws hold the heating element to the dryer wall. Remove these 2 screws. Might be a little tight
... Read moreto get back there. Try to be more patient than me. :) The wires on the heating element are plenty long enough to bring to the front & outside of the dryer. Remove screws holding thermostat & fuse to heating element. I wasn't sure if I needed a new thermostat or not, but it wasn't expensive so I went ahead & decided to put a new thermostat on the new heating element. I re-used the fuse from the old element, but they're not expensive either. Just notice how rthe thermostat and fuse are oriented on the old element & put them on the new element in the same orientation. I had to use pliers to get the wires off the old element's terminals. They were a little tricky to get off, but my dryer is over 10 years old. They've been on there a while. Just move 1 wire from old element to new element at a time. That way you don't have as much of a chance hooking up the wires wrong. Put new element in & everything back together. I vacuumed out the lint in the bottom of the dryer. I ran the dryer for over 30 minutes with no clothes in it to break the new heating element in. You're good to go! You CAN do this yourself. It's not a hard repair to do. Don't buy a new dryer or pay an appliance repair guy! Thanks to PartSelect for quick delivery & posting these instructions from other people!!
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ray
January 30, 2018
Where is the heating element located for Maytag dryer model number mdet236ayw? Is there a repair video for this specific model or similar model?
For model number MDET236AYW
Hi Ray,
Thank you for your question. The element would be located in the heater duct assembly located in the back of the dryer. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Did this question help you?
Thank you for voting!
RICK
February 7, 2019
No heat , i check all 3 thermo fuses they all show a short and the heating element ohms out at 9.8 ohms , which i think is good , could it still be a bad heating element?
For model number PLea10AW
Hello Rick, thank you for your question. Looking at your model information there are a few parts that you should take out and test to see which one is giving you the issue. The first parts to check in this case would be all of your thermostats and thermal fuses. You can test those parts with a multi meter and they should be reading 0 ohms to be working correctly. If those parts are fine, you should then go on to testing your heating element as well. You can also test that with a multi meter and it should be reading between 0 - 50 ohms. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. I hope that helps. Good luck with your repair.
3 people found this helpful.
Did this question help you?
Thank you for voting!
Gerard
February 14, 2018
How can i get the video on replacing heating element on Amana elect dryer?
Hi Gerard, Thank you for the question. We do not have a video as of yet for this element but we do have a video for a similar element with the same basic steps. Hope this helps!
https://www.youtube.com/watch?v=M9miM9kU3WU
2 people found this helpful.
Did this question help you?
Thank you for voting!
Elizabeth
December 29, 2023
My heating element is attached too the back wall of my dryer, there is no panel to take off to get to it. do i have to take the entire drum out to access the heating element?
For model number SDE4000AYW
Hi Elizabeth,
Thank you for your question. Here is a link to one of our YouTube videos that you may reference for information on how to install the heating element. The dryer and the heating element in the video may not be the same as yours, but it will give you a general idea on how to install the part. We hope this helps!
Did this question help you?
Thank you for voting!
Barry
April 11, 2024
Our dryer is not drying / heating up. I’ve checked the lint vent made sure it was clear. Can you help me finding the correct part(s)?
Thank You in advance.
For model number MDET446AYW
Hello Barry, thank you for your inquiry. According to our research, the issue is most probably with the cycling thermostat, part number PS11743793. It monitors and regulates the temperature inside the dryer. You may need to replace it to fix the issue. We hope this solves your problem!
Does this part come with the thermostat & thermostat limit? Or do you purchase those separate?
For model number SDE4606AYW
Hello Anita, Thank you for the question. This is just the element. The Thermostats are sold separate. Hope this helps, good luck with this repair!
Did this question help you?
Thank you for voting!
Jason
December 5, 2021
I’m looking for the replacement of:
Speed Queen #D510324P
Washer/Dryer ASSY HEATER
240V 5.0KW 60HZ PK.
Can you please help find the right replacement parts?!
Thank you so much!
For model number ADE3SRGS175CW01
Hello Jason, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2061575. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
ADE3SRGS173TW01.
Speed queen electric dryer.
I need the heating element for this dryer , will this heating helmet fit my dryer?
For model number ADE3SRGS173TW01
Hi Tom,
Thank you for your question. The part number listed under your model number for the heating element is PS2061575. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dryer","title":"Dryer","url":"/Dryer-Parts.htm"},{"position":2,"name":"Element or Burner","title":"Element or Burner","url":"/Dryer-Elements-and-Burners.htm"},{"position":3,"name":"WPY503978","title":"WPY503978","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
