Adjuster Arm Clip

Hi Tabitha, Thank you for the question. You will need to replace the Rack Adjuster Kit - Left and Right Side,PartSelect Number PS10064063.This kit includes the parts to replace the left and right-side rack adjusters and has been upgraded to a more durable metal design. This kit includes 2 adjuster assemblies, 1 left hand and 1 right hand actuator cover, 2 gray adjuster covers, and 2 gray adjuster housings. Hope this helps!

Hello Kendra, Thanks for your question. The rack adjuster kit is part number PS10065979, it was formerly an adjuster arm on the manufacturer's part list but redesign caused it to no longer show on the parts diagram. The part comes with both left and right sides together, and it can be ordered online. I hope this helps.

Hello Gwen, Thanks for your question. The adjuster arm clip, part number PS11751100, may be all you need, though you may also wish to examine the rack adjuster for any signs of wear and tear, part number PS11756150. I hope this helps.

Hello Chase, thank you for your question. The item # 4 is no longer available. You would have to replace the entire rack adjuster assembly for both sides, as that is the only way the manufacturer sells the parts now. The part number is PS10065979. I hope this helps!

Hello Jerry, thank you for your question. The little blue button is part of the adjuster housing left side, which is part number WPW10320664 and right side which is part number WPW10320665. The manufacturer has redesigned the rack adjuster assembly which would include all of the parts for the right and left sides of the rack. They made changes to make the parts more sturdy, and less likely to break. You may want to consider ordering the kit which is W10712394. The lever is less likely to break, and the wheels and mounting brackets are metal instead of plastic. I hope this helps!

Hello Lorin, Thank you for your question. You would need to replace the upper rack adjuster kit under part PS11756150 for your model. Hope this helps!

Hello Bev, Thank you for the question. The clips unsnap from the rack rails. They might be hard to remove. The new ones snap back in place. Hope this helps!

Hi Steve, Thank you for your question. The adjuster arm clip holds the adjuster assembly to the dishrack. If the dishrack is loose, then this is likely the part you need. There is also a rack adjuster kit containing both the left and right sides listed for your dishwasher. The original rack adjusters were made of plastic, but Whirlpool has redesigned them, so they are now made of metal to make them more durable. The part number listed under your model number for the rack adjuster kit is PS10065979. If you need help placing an order for these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Hello Christin, Thank you for writing. The Rack Adjuster, PartSelect Number PS11756150 comes as one piece. We hope this helps!

Hello Chris, thank you for your question. Unfortunately, we are not affiliated with Sears. We only sell the replacement parts for the Kenmore products. To find out about warranty please contact Sears directly. Usually the warranty for any appliance is only one year from purchase date. The part you would need is the rack adjuster assembly that the manufacturer has redesigned to be more sturdy as the original designed broke easily and was not sufficient to hold the rack in the rails. The part number is PartSelect Number PS10065979. Please enter the part number into the site for current price and availability as well as the installation video. Good luck with your repair!