Whirlpool/Whirlpool_Thumb/NG68TURJ.gif
See part 16 in the diagram

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Shift Actuator - 120V 60Hz

★★★★★
★★★★★
14 Reviews
$ 57.50   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11747977
Manufacturer Part Number WPW10006355
Manufactured by Whirlpool
Product Description

Shift Actuator - 120V 60Hz Specifications

This part changes the transmission from agitation to spin mode. This actuator is for washers. Actuator shifts the splutch and monitors the position of the splutch.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Pumps but will not spin | Will not agitate | Will Not Start | Spins slowly
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Maytag, Kenmore, Amana.
Part# WPW10006355 replaces these:
AP6014711, W10006355, WPW10006355VP
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

48 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joshua
January 7, 2018
Washer will not start. It stays stuck in the sensing mode.
For model number mvwx500xw2
Hi Joshua, Thank you for the question. In most cases this requires a new Shift Actuator,PartSelect Number PS11747977. It may just be that the unit needs error codes cleared and a calibration test done. There should be a tech sheet taped inside the unit that will explain how to do this for your specific unit. I hope this helps

19 people found this helpful.

Was this helpful?
Thank you for voting!
Debbie
December 31, 2017
Our Kenmore washer will spin, but started making very loud grinding noise.
For model number 11021302012
Hello Debbie, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: the clutch assembly, the suspension rod supports, and the shift actuator. Hope this helps!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Frank
April 3, 2018
After the spin/rinse cycle my clothes remain dripping wet.
For model number 26002010
Hi Frank, Thank you for the question. If the drum is not spinning at all, I suggest checking the lid switch. If the switch is defective it will think the lid is open and will not allow it to spin. if the drum is spinning but not at a high enough speed to spin the water from the clothes, I suggest testing the Shift Actuator,PartSelect Number: PS11747977. Hope this helps!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Ken
January 29, 2018
My machine will wash, spin, and rinse. It will only work if i monitor it and keep pressing the start button. I ran the codes and replaced the latch assembly but it still sits there and does nothing unless i hit start on the last twelve minutes it has left. I've cleared the codes and it works a little bit better. It will only drain and spin it i turn the selector to drain and spin then i have to help it again. Can you help.
For model number MVWX700XW1
Hi Ken, Thank you for your question. It sounds like you may want to take a look at your door lid switch and your electronic control board. If the door switch is intermittently malfunctioning then that could be why your appliance is stopping and only starting up again when you come to look at it. I would also suggest you look at your control board as well because that is what shifts through your different cycles. I hope that helps. Good luck with your repair.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Charlotte
February 11, 2018
I know that something is starting to fail on my machine, but not sure what part. About every 6 loads it fails to spin, occasionally fails to drain at all, but if i set it to 'drain and spin' usually that will initiate that okay. Though sometimes that fails as well and i had to unplug the machine to get it to unlock so i could try again. About half the time when it is spinning it sounds like it is getting ready to launch into space. It's been suggested to me by some friends that it might be the 'shift switch', what do you think?
For model number Kenmore 11025102310
Hi Charlotte, Thank you for your question. There are some parts that you will need to check to see which one is causing the issue. You will need to check the lid latch assembly, the lid latch, the shift actuator, the bezel, the drive belt, the pump and the clutch assembly. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Greg
September 29, 2017
Washer will not start. It stays stuck in the sensing mode.
For model number WTW5700XW2
Hello Greg, Thank you for contacting us. It may just be that the unit needs error codes cleared and a calibration test done. There should be a tech sheet taped inside the unit that will explain how to do this for your specific unit. I hope this helps

3 people found this helpful.

Was this helpful?
Thank you for voting!
Corey
November 2, 2017
My washer fills and drains ok, agitates ok, but will not spin in any cycle. It just stops and the lid light flashes. Will this part fix the problem? Thanks.
For model number WTW4800XQ0
Hi Corey, Thank you for your inquiry. If the washer is not spinning there are some parts that you will need to check to see which one is causing the issue. You will need to check the agitator directional cogs, the agitator cam kit, the shift actuator, the lid latch assembly, the drive belt, the drive block, the inner seal cap, the clutch assembly, the complete agitator, the agitator cap barrier with seal and the spacer thrust. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Michelle
September 14, 2017
My washing machine will spin, but it will not agitate. I start the washer, it fills but then shuts off. When i open the washer lid, the clothes have not moved. I tried to rinse and spin and it fills then stops. It will spin and drain. I cannot move the agitator plate with my hand, it's stuck. I took off the agitator plate and the "teeth" are not worn or broken. I cannot rotate the shaft. The tub itself turns easily. My washer doesn't spit or drip any grease under the washer.
For model number wtw5640xw3
Hi Michelle, Thank you for your inquiry. Where the washer is not agitating there are a few parts you will need to check to see which one is causing the issue. You will need to check the washer that goes on the agitator retaining bolt, the drive belt, the shift actuator, the clutch assembly, the washplate, the lid latch assembly and the shield. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Amy
December 6, 2018
Before it gets to spin cycle the lid lock light flashes and will not spin
For model number Wtw5500xw3
Hi Amy, thank you for your question. It could be this part however it seems more likely that you will want to check the lock itself. That part actually allows your appliance to go into the spin cycle. It is a safety device that will not let the appliance spin if it thinks the door is open. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Homer Gilbert
July 22, 2019
My washer will not go into spin mode . Green sensing light comes on and red lock lid light on all it does click.
For model number MVWC360AWO
Hello Homer, thank you for your question. The issue is most likely the PartSelect Number: PS11747977, shift actuator. This part changes the transmission from agitation to spin mode. I hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 3.4 / 5.0, 3 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    Lid Lock light blinking, machine will not start
    A detailed Service Technician Service Manual is hidden inside the machine on the front panel. It is hidden by the bleach dispenser input. It gives a list of fault codes and instructions for calibration after repair, resetting fault codes, and a manual test mode for stepping the machine through each mode on command. The Tachometer failed which would not let the machine come up to maximum spin speed. The tachometer is part of the solenoid actuator that shifts the transmission. It is not specifically called out in the manual. Any failure causes the lid lock light to blink which gives the appearance of a lid lock failure
    • David from Los Alamos, NM
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Screw drivers
    • Parts Used:
      WPW10006355
    288 of 358 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    washer was draining but no spinning
    Disconnect electrical plug from the wall, disconnect drain hoses and tip washer forward remove belt hosing basket and then remove the electrical plug that contains seven wires connected to actuator then remove the two small screws.
    Then reverse the operation to stall the new part. Very easy.
    • JOSE from MILLBURY, MA
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Screw drivers, Socket set
    • Parts Used:
      WPW10006355
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    washer shake hole machine from begin spin about 11/2 ' h
    chage out part and washer still shake
    • Dieu from Houston, TX
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      30 - 60 mins
    • Tools:
    • Parts Used:
      WPW10006355
    1 of 4 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      14 Reviews
      4.7
      Filter By Rating:
      • 5 Stars
        11
      • 4 Stars
        2
      • 3 Stars
        1
      • 2 Stars
        0
      • 1 Star
        0
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS11747977
      Manufacturer Part Number: WPW10006355
      Brand
      Model Number
      Description
      Kenmore
      11020022010
      Washer
      Kenmore
      11020022011
      Washer
      Kenmore
      11020022012
      Washer
      Kenmore
      11020102310
      Washer - AUTOMATIC WASHER
      Kenmore
      11020102311
      Washer - AUTOMATIC WASHER
      Kenmore
      11020112310
      Washer - AUTOMATIC WASHER
      Kenmore
      11021102010
      Washer
      Kenmore
      11021102011
      Washer
      Kenmore
      11021102012
      Washer
      Kenmore
      11021102013
      Washer - AUTOMATIC WASHER
      Kenmore
      11021112010
      Washer
      Kenmore
      11021112011
      Washer
      Kenmore
      11021182010
      Washer
      Kenmore
      11021182011
      Washer
      Kenmore
      11021182012
      Washer
      Kenmore
      11021202010
      Washer
      Kenmore
      11021202011
      Washer
      Kenmore
      11021252110
      Washer
      Kenmore
      11021252111
      Washer
      Kenmore
      11021292010
      Washer
      Kenmore
      11021292011
      Washer
      Kenmore
      11021292012
      Washer
      Kenmore
      11021292013
      Washer - AUTOMATIC WASHER
      Kenmore
      11021302010
      Washer
      Kenmore
      11021302011
      Washer
      Kenmore
      11021302012
      Washer - WASHER
      Kenmore
      11021302013
      Washer - AUTOMATIC WASHER
      Kenmore
      11021352110
      Washer
      Kenmore
      11021352111
      Washer
      Kenmore
      11021392010
      Washer

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service