This is a surface burner knob. This knob is a little under 2 inches in diameter. It is a black part with gray numbering indicating the temperature level of the surface burner: low, medium, high, off, and lite. This knob is made entirely of plastic. Its function is to allow the user to control the heat coming from the surface burner on the range. This model will only accept a D-shaped shaft. To make this repair, grab the knob with a tight grip and pull it straight off the shaft. When you receive your new part, you can snap it back into place.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Martha S - January 10, 2024
Verified Purchase
The part that I ordered was exactly what I order.
The replacement knobs were a perfect fit and worked like a charm.
★★★★★
★★★★★
Ellen C - July 21, 2022
Verified Purchase
Perfect fit!
I was so pleased to find the exact knobs needed for my range top which is over 25 years old
★★★★★
★★★★★
Joe G - February 11, 2022
Verified Purchase
Ok replacement
The letters on the knob are a different color than the original. The shape of the handle on the knob is also different than the original. The knob doesn't go as far down on the shaft as the original. It did fit well on the shaft. Overall it was an ok replacement.
★★★★★
★★★★★
Susan A - January 9, 2022
Verified Purchase
Easy repair worked as expected! Fit exactly.
The part was in perfect condition and came fast. My appliance is now in working order.
★★★★★
★★★★★
Cindy A - October 26, 2021
Verified Purchase
Easy repair
Nice update with these knobs. Off with the old on with the new. Great face lift!
★★★★★
★★★★★
Sabine K - March 30, 2021
Verified Purchase
Easy repair
Was a good fit for our stove.
★★★★★
★★★★★
James G - March 4, 2019
Verified Purchase
Exact fit
Part is exact however rather expensive. Will order needed knobs as the old melt beyond use.?
★★★★★
★★★★★
Eugene N - February 9, 2019
Verified Purchase
So Simple ... even I could do it
You Can't Get it Wrong
★★★★★
★★★★★
Shonna C - January 27, 2019
Verified Purchase
Replacing broken knob
I was disappointed that it didn’t match the other 3 knobs on the stove even though I put in the serial number to the stove
★★★★★
★★★★★
Jenny A - October 28, 2018
Verified Purchase
nice looking knobs
makes my old burner look a little newer and easier to turn than the old ones
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 15 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Baking element out in wall oven
My son did the repair for me. It was easy, he said. just slid it out and put new one in.
Patricia from Martinsburg, MO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
valve for turning on gas is immovable
1. Turn off power to the cooktop and turn off the gas. This is extremely critical. 2. Remove the knobs and then the covering. Beneath will be the valve part you need to change. 3. Find a way to mark where all the wires go into the piece that sits over the valve (mine was white with a blue ring in the center). You will see four wires goin
... Read moreg into it. You can photograph it, or you can use tape and a sharpie to write where everything goes on the parts themselves. It is likely that they will become disengaged at some point during your repair, so the step is crucial. 4. Lift off the piece on top of the valve (the valve goes through the blue hole in the center of the white piece). Don't be afraid to give it a tug, as it can be slightly stuck. 5. Find a way to get underneath the large circular plate (mine was gold colored) beneath the valve in order to remove any screws that are holding the valve in place unseen below the surface. 5. Now back above the surface: disconnect the gas valve attached to the valve. 6. Switch out the valve to the new one and reverse these steps to install it. ****7. If you are unable to get beneath the plate where the valve is attached on the underside, no worries. Take the new valve and carefully unscrew the top two screws (need a special tool from a hardware store) and similarly take off the screws on top of the broken valve. Be very careful to remove the top of the old valve slowly enough to see exactly how the inside pieces have to be put together. Essentially, you will find a spring and a small ring with three notches. The small part of the spring goes on the bottom, the larger part of the spring faces upward, and on top of that goes the ring with the three notches aligned in a certain way that's very important so that when you put it back together not only will the valve depress properly but you will be able to change the fire from low to medium to high. Make sure you can depress the valve a little bit, if not you have to readjust the ring until it's in the proper position. 8. Turn on gas and power to be sure it works. 9. Close unit. ***Note: if any of your parts accidentally dropinto the opening, use a magnetized srcrewdriver to retrieve them.
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
knobs were no longer legible
Simply remove old control knobs and replaced with the new ones. I talked to the saleswoman and she was extremely helpful and assured me it was the right part. And it was.
Mae from Forty Fort, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old cracked
pull off old ,add new
JOHN from GAINESVILLE, GA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The burner knob brock
Went broke purchasing the very simple part through you PartSelect Appliance Parts
Warren from Alexandria, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
148 of 287 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The new Maytag knobs did not depress the half-round metal post and therefore did not allow the knobs to turn.
Inside the knob, I placed a dab of CA glue on the small plastic projection , which was designed to press against the metal post, but was just shy of it. By thus building it up the knobs function perfectly.
James from Pittsboro, NC
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
my old knobs melted when someone placed a hot cookie sheet on them
This wasn't a repair; it was a desperately needed replacement. I simply popped off my old knobs and put the new ones on in less than 1 minute. The new knobs took years off my beloved gas Jenn-Air stove. The knobs arrived within two days of placing my order. Outstanding customer service. I will order from this company again and ag
... Read moreain.
Read less
Theresa from Davis, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One grate was broken the other was corroded, and the knobs were melted
Removed old knobs and grease filter and replaced with new ones. Excellent service, parts arrived the day after I ordered them. Everything fit perfectly and was just as described on the website. I would certainly use PartSelect again for replacement parts on any listed appliance.
stem on the dial split, couldn't turn the burner on
threw out the old and slipped on the new dial....
Kathy from Bell, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
150 of 289 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stewart
November 27, 2019
Our stovetop is 30 years old and the new knob's stems are not long enough to engage mechanism to allow burners to turn on. Any suggestions? If necessary could we replace that section of the stove top only?
For model number cg106
Hello Stewart, thank you for your question. Unfortunately, these are the only replacement knobs available for other options we would recommend contacting the manufacturer directly. I hope this helps.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Judy
March 2, 2020
I need the burner knobs in grey for a white unit. I only see black ones on your website. Are the grey knobs available?
For model number CVG4280
Hello, Thank you for your question. The grey knobs for your model are Surface Burner Knob- PartSelect Number PS11743852. We hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Paula
September 20, 2021
How many knobs come in the order for 14 dollars
For model number Jennaire down draft cooktop
Hello Paula, thank you for your question. This knob is sold individually. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Fran
May 5, 2023
The knob will not turn .it’s the front burner knob.
Also I’m thinking of replacing the grill with 2 more burners how much would that cost
For model number CG200
Hello Fran, thank you for your question. The Knob is PS11743851. The Grill Burner is PS1988290. The Grill Grate is PS2002886 but discontinued with no replacement. All parts are sold individually. For the most up to date pricing and availability, please visit the website or call in to speak with customer service. We hope this helps.
What size is the shaft on the surface control knob?
Hi Joyce, Thank you for your question. Unfortunately the manufacturer does not give us exact specifications on their parts. However this part is photographed on a one inch grid background, so that customers can get an approximate size for the part. It looks like the shaft is about 1/2 of an inch wide. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Pedro
July 9, 2019
How many on the package
For model number Cg206b
Hello Pedro, Thank you for the question. These knobs are sold individually. Hope this helps!
Was this helpful?
Thank you for voting!
Vickie
July 25, 2019
Got new knobs the shaft is too short can't turn on burners what can I do?
For model number CG206S
Hello Vickie, Thank you for the question. I suggest contacting customer service at 1-888-738-4935 so we can check the order to make sure the correct knobs were ordered and shipped. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
