This is a surface burner knob. This knob is a little under 2 inches in diameter. It is a black part with gray numbering indicating the temperature level of the surface burner: low, medium, high, off, and lite. This knob is made entirely of plastic. Its function is to allow the user to control the heat coming from the surface burner on the...Read more range. This model will only accept a D-shaped shaft. To make this repair, grab the knob with a tight grip and pull it straight off the shaft. When you receive your new part, you can snap it back into place.
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
The hinges control the rate that the oven door opens and closes, and allows the door to stay open at an angle. This hinge can be used on either the left or right hand side of your oven, and is approximately 20 1/2 inches long. If your oven door will not open or close easily, you may need to replace this part. It may be a good idea to repl...Read moreace both hinges at the same time. If a spring has become loose on one hinge, the other hinge is likely to have the same issue. The repair is simple and only requires a Phillips screwdriver and a small bent nail. For a full step-by-step guide, check out the video below.
This grease jar lid is used for some of Maytag/Jenn-Air's brands of ranges and cooktops. This lid is not quite an inch high and is three inches in diameter.
This rivet is an inch and a half long. It is used for many washing machines, microwaves, refrigerators, dryers, and ranges. Use of this rivet requires a rivet tool.
This part number matches the current model number 12303
Part #12303
Genuine Ridgid replacement part, this item is sold individually. The part number 12303 Filter Plate is installed at the bottom of the VF4000 Filter It is locked in place by the 83872. This helps to keep the filter in place in the Vacuum models listed below.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
one of the surface burner knobs melted and then cracked
474 of 479 peoplefound this instruction helpful.
Ronald from Philadelphia, PA
Really Easy
Less than 15 mins
the hardest part of the whole thing was finding the part... partselect.com made it easy. the part was delivery quickly using regular mail, and I was simply able to slide the new knob on.
Was this helpful?
Thank you for voting!
3 out 4 surface burner knobs were broken
174 of 322 peoplefound this instruction helpful.
Aaron from Elkton, MD
Really Easy
Less than 15 mins
Simply pulledoff and threw away the old bad knobs and slipped the new ones on in thier place- four working burners now!
Most amazing thing was I ordered the parts one afternoon and they arrived the very next day.
Also, your site was easy to navigate and find what I was looking for. Many thanks!
Was this helpful?
Thank you for voting!
stem on the dial split, couldn't turn the burner on