EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖
Sign In | Create Account
| Your Account
Back
Back
Back
Keep typing for more specific results...

Shop by Department

See All >
Appliance Parts & More Appliance Parts & More Lawn & Garden Parts Lawn & Garden Parts Heating & Cooling Parts Heating & Cooling Parts Power Tool Parts Power Tool Parts Patio & Yard Parts Patio & Yard Parts BBQ & Grill Parts BBQ & Grill Parts Small Appliance Parts Small Appliance Parts Help me find my model number Help me find my model number

Top Appliance Brands

See All >
Whirlpool Parts Whirlpool General Electric Parts General Electric Samsung Parts Samsung Frigidaire Parts Frigidaire

Top Lawn Equipment Brands

See All >
Toro Parts Toro Briggs and Stratton Parts Briggs & Stratton Husqvarna Parts Husqvarna Craftsman Parts Craftsman
Keep typing for more specific results...
Price Match Guarantee
Fast Shipping All Original Manufacturer Parts Genuine Quality 1 Year Warranty
Install videos!
Easy
11740682-1-M-Whirlpool-WP307178-Heating Element - 240V
Part Location Diagram of WP307178 Whirlpool Heating Element - 240V
See part 28 in the diagram
Replacing your Maytag Dryer Heating Element - 240V
11740682-1-S-Whirlpool-WP307178-Heating Element - 240V 360 view
( Grid squares measure 1x1 inch )
11740682-1-S-Whirlpool-WP307178-Heating Element - 240V 11740682-2-S-Whirlpool-WP307178-Heating Element - 240V 11740682-1-S-Whirlpool-WP307178-Heating Element - 240V 360 view
Part Location Diagram of WP307178 Whirlpool Heating Element - 240V Replacing your Maytag Dryer Heating Element - 240V
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 8pm EST

customerservice@partselect.com

Heating Element - 240V WP307178

 Fits your LDE7600AGG!
★★★★★
★★★★★
5 Reviews

Easy 

1- 2 hours 

Rated by verified customers
$ Price Match
OEM badge Official OEM
$ 176.37
  In Stock
Order now and your part arrives by Apr 9
 Fits your LDE7600AGG!
PartSelect Number PS11740682
Manufacturer Part Number WP307178
Manufactured by Whirlpool for Maytag, International, Crosley

Jump to:

Product Description

Heating Element - 240V Specifications

The dryer heating element provides the heat needed to dry your clothing during a cycle. The part consists of a metal tube with a coil inside. It carries a 240 voltage, and is almost 15 inches long with a diameter of approximately seven inches. The heating element comes with a thermal fuse and a heat shield. You will need a Phillips screwdriver, a 1/4-inch nut driver, a 5/16 nut driver, and a pair of needle nose pliers to replace your heating element.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Why buy the real thing?

OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.

  • OEM from PartSelect
  • Genuine brand name
  • Guaranteed to fit
  • Superior quality and durability
  • 1 year warranty
  • Generic
  • Unknown manufacturer
  • No fit guarantee
  • Inconsistent quality and lifespan
  • Limited warranty and support
Back to Top
You May Also Need ?
High Limit Thermostat (Limit: 200-30)
$30.53
  In Stock
Affresh Dishwasher Cleaner Tablets - 6
$22.52
  In Stock
Affresh Washing Machine Cleaner - 3 pack
$20.36
  Special Order
Affresh Washing Machine Cleaner Tablets – 6 Count
$28.42
  In Stock
Produce Preserver Filter
$18.22
  In Stock
Refrigerator Deodorizer
$31.58
  In Stock
Affresh Ice Machine Cleaner
$27.36
  In Stock
Back to Top
Part Videos

Replacing your Maytag Dryer Heating Element - 240V

Replacing your Maytag Dryer Heating Element - 240V
Back to Top
Troubleshooting
This part fixes the following symptoms:
  • Not Heating
This part works with the following products:
  • Dryer
Part# WP307178 replaces these:
AP6007565, 3-7178, 307178
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
5.0
Filter By Rating:
  • 5 Stars
    5
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
James A - February 14, 2018
  Verified Purchase
The part was very simple to install
The part works, simple to install and learning videos very helpful!
★★★★★
★★★★★
David W - May 6, 2019
  Verified Purchase
Installed, it worked perfectly
The Maytag heating element for our dryer was new with no defects, was installed and worked perfectly,
★★★★★
★★★★★
Harold K - February 15, 2019
  Verified Purchase
Easy repair
Part is as advertised took less than 15min to replace
★★★★★
★★★★★
John R - August 9, 2018
  Verified Purchase
Easy repair
The whole process was easy - start to finish!
★★★★★
★★★★★
Thomas H - April 29, 2020
  Verified Purchase
Perfect fit works great
Perfect fit works great
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.1 / 5.0, 10 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No Heat when Dryer was running/Clothes did not dry
First, unplug the dryer.

Second, remove the front of the dryer by removing the two screws at near bottom on both the left and right. These look like security Torx with the post in the center but you can remove them with a small flat-blade screwdriver.

Third, remove the wires from heating element on the right. There are the two power connections (one each at about 2 and 7 oclock) and two for the sensor at 11 oclock. You probably want to user pliers to remove these just in case...

Fourth, remove the two 1/4" screws holding the heater element in place. One is in the front center, the other is at about 1 oclock at the rear.
Pull straight out and the element comes free.

Fifth, remove the circuit interrupter from the old unit and install it on the new unit. Be sure to move the jumper from the heating element power (about 5 oclock) and the interrupter.

Sixth, install the heating element. The element is a cylinder of metal. I found that I needed to bend in the seam at the back very slightly to get it to fix back in.

Seventh, alight the screw holes and replace the 1/4" screws.

Eighth, reattach the wires, being careful to replace each where it came from.

Ninth, replace the dryer front...and your done.
Read less
  • John from SPRINGFIELD, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heat from electric dryer
The hardest part of this repair was diagnosis. After running continuity tests on the electrical components, removing the heating unit showed a broken filament on the heat coils. The replacement part fit mechanically, but used spade terminals for high voltage instead of the original mounting posts, requiring retermination of the wires. One of the power leads also had to be extended in length. All works after completion.
Read less
  • John M from SAINT LOUIS, MO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer not getting hot enough
my son did the installation according to your excellent video instructions
Other Parts Used:
Heating Element - 240V High Limit Thermostat (Limit: 200-30)
  • RON from VIENNA, VA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heat
I watched Steve the repairman on u tube then opened up the front of the dryer and noticed the part in my dryer was a little different than the one on the video. So I called in and I was reassured it was what I wanted. When I got the replacement part and before I removed the old part I took pictures of the wiring noticing the wires where changed from left to right I had to make up one of the 12 gauge wires and connectors with parts from the hardware store and the new part was shorter than the old part, but the machine all ready had screw holes where I needed them. I looked at my photos and wired the new part the same way I took the wires off the old part and put it back together and it works like new! saved money! the local guy is $150 to show up and start the clock. I also fixed the blower,EASY!
Read less
  • Steve from MENDOCINO, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer wasn't heating sufficiently/consistently.
Removed front cover, removed old heating unit, installed new thermostat,heating coil inside the dryer and finally replaced the fuse in the front. The main complication was reaching the screws for the heating coil, not really complex.
Other Parts Used:
Thermal Fuse (Limit: 183) Heating Element - 240V High Limit Thermostat (Limit: 200-30)
  • Kathy from Lilburn, GA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
8 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat from the dryer
Well, I had to find out just how the dryer came apart. Most of the time, the back comes off but with this particular Maytag, it is the front that has to be removed. Once the four screws from either side are removed, the front pops off and the canister that holds the heating element is right there on the bottom. Cleaning away years of lint was fun but the heating canister was removed quickly using two screws and removing four wires that attached to the unit. Once the screws were removed (top back and bottom front) and the wires removed, the replacement unit slid right in without any problems. The regulator on the old unit had to be transferred to the new unit before installation. I closed up the front, put the four screws back in and snapped the front closed and the dryer worked perfectly.
Read less
  • James from blanchester, OH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
14 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
element was burn out
took the front off by removing two screws took two screws out of element housing undon the wire and romeve element housing then romove the remaing parts that was needed on the new element then reinstall the element housing whith the new element in ti reinstall front of dryer and starting drying clothes project was complete
  • carl from moultire, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
51 of 66 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Squealing like crazy and not heating up enough
First things first... UNPLUG THE DRYER! Tilt back at like 45 degree angle. Remove the two screws from bottom front. Remove front cover. Disconnect wires from heating element making sure to mark what wires attach where, then the two bolts from the heating element. Replace heating element and attach wires to new element. Take belt off of motor from back. Remove four bolts holding front of the drum. Remove drum. Remove C-clips from Drum Support Rollers and then rollers. Install new rollers washers and C-clips. Put drum back and place belt, flat side to drum, on drum using two pieces of tape to hold in place. Put front drum cover back on and bolt on. Put front of dryer back on. From back of dryer feed belt onto motor. Plug in and check to see if all is working correctly.
Read less
Other Parts Used:
Tumbler and Motor Belt Heating Element - 240V Drum Support Roller Kit
  • Michael from Reading, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench set
23 of 782 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating Element was starting to fail
It was very simple. I removed the fromt cover on the dryer. The heating element was easy to get to and after removing all the attached wires and 4 nuts. The new element was installed, reattached the wire correctly and put the screws back in place. It was extremely easy to complete.
  • Timothy from Loganton, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Sqeaking and sqealing
Removed the front (two screws at bottom).
Marked all the wires for the door switch, bulb socket and sensor and unplugged.
Removed the barrel hanger (four hex screws two each side).
Cleaned and vacuumed internals.
Removed the front hanger and barrell.
Started with rear rollers, removed old rollers and washers. ... Read more />Using 1/2" box end wrench loosened roller shaft nuts on rear of bracket.
Installed in reverse shafts, washers, rollers, snap rings.
Installed new theromstat on new element,
Removed screws from old element.
Swapped wires from one post on old element to new. Installed new element.
Reinstalled barrell, and front hanger.
Realigned new belt, making sure all clearences around idler pulley.
Free wheeled barrel, no binding.
Re-attached sensor and switch leads.
Reattached front.

Plugged in and tested successful.
Took two hours and three beers.
Read less
Other Parts Used:
Roller Shaft Light Bulb - 7W Heating Element - 240V High Limit Thermostat (Limit: 200-30) Drum Support Roller Kit
  • Chris from Marietta, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Wrench set
25 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11740682
Manufacturer Part Number: WP307178
Brand
Model Number
Description
Crosley
CDE4205AYJ
Dryer - Residential
Crosley
CDE4205AYW
Dryer - Residential
Crosley
CDE4205AZJ
Dryer - Residential
Crosley
CDE4205AZW
Dryer - Residential
Maytag
DE4000
Dryer - Residential
Maytag
DE4910
Dryer - Residential
Maytag
DE5910
Dryer - Residential
Maytag
DE7400
Dryer - Residential
Maytag
DE7500
Dryer - Residential
Maytag
DE7600
Dryer - Residential
Maytag
DE7800
Dryer - Residential
Maytag
DE8000
Dryer - Residential
Maytag
DE8200
Dryer - Residential
Maytag
DE8300
Dryer - Residential
Maytag
DE8410
Dryer - Residential
Maytag
DE8420
Dryer - Residential
Maytag
DE8500
Dryer - Residential
Maytag
DE8600
Dryer - Residential
Maytag
DE9700
Dryer - Residential
Maytag
DE9800
Dryer - Residential
Maytag
DE9900
Dryer - Residential
Maytag
GDE4000
Dryer - Residential
Maytag
GDE4910
Dryer - Residential
Maytag
GDE5910
Dryer - Residential
Maytag
GDE7400
Dryer - Residential
Maytag
GDE7500
Dryer - Residential
Maytag
GDE7600
Dryer - Residential
Maytag
GDE7800
Dryer - Residential
Maytag
GDE8000
Dryer - Residential
Maytag
GDE8200
Dryer - Residential
Back to Top
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 8pm EST

Contact Customer Service
Heating Element - 240V
$ 176.37
  In Stock
✖
Stock Status
 In Stock

Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.