All Installation Instructions for Hotpoint Range RGB845BEC3WH

Oven didn't work properly - stopped preheating, the started on its own when turned off

The part is not an exact replacement for the original. But it does fit perfectly. The electric connections are in different places, but they are marked (and so was the original), so that was easy enough. Part has a different look compared to original, but once installed, it is fine. Hardest part was figuring out how to take apart the control panel. New part solved all our problems. Make sure you order the new knob. The shaft is different, so your original knob will not work.

Parts Used:

Electronic Control

Thermostat Knob - Black

Michael from MARQUETTE, MI
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Wrench (Adjustable)

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

nylon guide was broke off

took drawer out removed broken guide. It had 1 screw removed it put the new guide in place put screw back in. Put drawer back in stove, It works fine.

Parts Used:

Drawer Glider - Right Side

Lathan from Goodyear, AZ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

5 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Drawer glide broken

took nut driver to remove the old and replaced with new. simple.

Parts Used:

Drawer Glider - Right Side

TERESA from SALTVILLE, VA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Oven will not preheat. Pulses on an off.

Turned off the gas. Disconnected gas inlet, burner supply line and oven supply line from regulator. Unscrewed regulator from its bracket. Replaced with new regulator in reverse order and added teflon tape suitable for gas lines to all threads.

Unfortunately, the regulator was not the cause of the problem and the oven still does not prehead - acts exactly the same.

Parts Used:

Pressure Regulator

Paul from San Francisco, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable), Wrench set

7 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Wife broke gas lines when trying to clean under hood

Removed old line with wrench and attached new line to gas valve first. Then lowered hood to the stop and attached gas line to burners.........very easy and works fine now.

Parts Used:

Burner Tube - Left Front

Burner Tube - Right Front

Scott from Corinth, MS
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Burner on stove not working correctly

Order parts and installed - no tools needed - completed repairs less than 1 minute

Parts Used:

Burner Head - Medium - 9500

Trevor from Eldersburg, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Well used burners..

Replaced the old with the new parts...stove like new...very pleased with the improved function and appearance of stove.

Parts Used:

Small Burner - 5K

Burner Head - Medium - 9500

Burner Head - Large - 12K

Double Burner Pan - Left Side

Melissa from Mastic Beach, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

7 of 16 people found this instruction helpful.

Was this instruction helpful to you?

couldn't set clock or turn oven on

removed 4 screws in the back to access circuit board.unplugged connector and four wires.removed 4 screws that held circuit board.installed new board and reverse procedures

Parts Used:

Electronic Control

michael from mount prospect, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

No burner

I just put everything on it and lighted match and problem solved! Easy fix!

Parts Used:

Burner Head - Large - 12K

Burner Cap - Large

Cooktop Mounting Screw

ESTELA E from HOUSTON, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Burner had uneven flames

Too easy a five year old could do it

Parts Used:

Burner Head - Large - 12K

Akshay from Bridgeton, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

No problem

I used a nutdriver to remove the natural gas orifice and I placed the other liquid gas orifice

Parts Used:

Natural Gas to Liquid Propane Conversion Kit

Laurindalva from LODI, NJ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Broken drawer glider

Took off broken part and replaced it with the new part by removing a Phillips head screw, the broken part, replace with new and reinstalling the same screw.

Parts Used:

Drawer Glider - Right Side

James from RANCHO MIRAGE, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

lights blown out

replaced lights in refrigirator and freezer

Parts Used:

Light Bulb - 40W

Gerald from WINTERVILLE, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

6 of 14 people found this instruction helpful.

Was this instruction helpful to you?

Uneven flame on large gas burner

The part was very easy to switch out but it made no difference whatsoever so I returned it. The way it is designed is the problem. There is a pie slice shaped gap on the burner which causes a gap of no flame. Also a C shaped cut out around the igniter which causes another no flame gap.

Parts Used:

Burner Head - Large - 12K