Electronic Control WB27K10140

The part is not an exact replacement for the original. But it does fit perfectly. The electric connections are in different places, but they are marked (and so was the original), so that was easy enough. Part has a different look compared to original, but once installed, it is fine. Hardest part was figuring out how to take apart the ... Read more control panel. New part solved all our problems. Make sure you order the new knob. The shaft is different, so your original knob will not work.

Very simple, removed the face of the stove and unscrewed the electronic control, disconnected the wires and reinstalled new part in the same order.

Removed top part of oven (control panel )replaced control. The new control had different knob so it was a little a surprise got a little upset with company after this but in the end got it fixed by using some tricks of mine

removed 4 screws in the back to access circuit board.unplugged connector and four wires.removed 4 screws that held circuit board.installed new board and reverse procedures