This 40-Watt light bulb is sold individually.
It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place.
This double burner pan works with your range to catch grease and debris during the cooking process. It is designed to fit under a small and large burner. Your range will have two double burner pans, one on each side of the range top. This part is made for the right side burners, and is sold individually. Be sure to check your model’s comp...Read moreatibility, as this burner pan will not fit ranges with individual burner pans for each element. This product is black in color. To replace this part, simply remove the old right-side double burner pan and replace it with the new one. No tools are required for this repair.
This double burner pan works with your range to catch and grease and debris during the cooking process. It is designed to fit under a small and large burner. Your range will have two double burner pans, one on each side of the range top. This part is made for the right side burners, and is sold individually. Be sure to check your model’s ...Read morecompatibility, as this burner pan will not fit ranges with individual burner pans for each element. This product is black in color. To replace this part, simply remove the old left-side double burner pan and replace it with the new one. No tools are required for this repair.
This burner head, or surface burner, is used in ranges and ovens. The burner sends gas through the holes and slots to create an equal flame across the cooking area. If the gas igniter glows but will not light up, or there are heating inconsistencies, replacing the burner head could be the solution to your problem. No tools are required fo...Read morer this installation. To change the burner, first lift the grate and take the burner cap off. Next, lift the burner away from the cooktop. To set the new burner in place correctly, check the locating tab that fits into the V-shaped notch and make sure the igniter fits into the cut-out. Refer to the diagram provided by the manufacturer for further instructions.
This large surface burner head is designed for use with gas cooktops and ranges, delivering consistent heat output for everyday cooking. Rated at 12,000 BTUs, it distributes gas evenly through precision-engineered slots or holes to create a stable flame. Made of metal with a silver finish, the burner head measures approximately 3.5 inches...Read more in diameter and sits beneath the burner cap. It is a direct replacement for worn or malfunctioning burner heads and helps restore efficient performance. For safety, always shut off the gas supply and unplug the appliance before installation. Compatibility should be confirmed with your specific model prior to replacement.
This genuine small burner is an original replacement part from GE, designed for use with a wide range of gas ranges. Positioned between the rangetop and bracket assembly and the burner cap, it plays a key role in generating the flame needed for cooking. No tools are required for installation, making it a quick and convenient replacement. ...Read moreThe burner is sold individually, and users should consult their appliance manual for proper installation and safety guidelines.
This Genuine OEM GE Electrode Clip is a precision-engineered component designed for use across a wide range of gas ranges. Constructed from durable metal, the clip plays a critical role in securing the electrode top within the rangetop and bracket assembly, ensuring stable and reliable ignition performance. Sold individually, this replace...Read morement part is ideal for routine maintenance or repair. For ease of installation, a pair of pliers is often recommended to assist with proper placement. Trust in genuine GE parts to maintain the safety and efficiency of your appliance.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
GEMMA - For model number RGB746HED2WH
March 21, 2020
Hi - thanks for helping! We've had our oven since about 2002 and love it. The only issue is that the oven will not get to, nor stay, at higher temperatures. Last night for example, i needed it to get to 400 degrees. The heating and pre-heating light lit up... but the stove never got above 325... this is common. thanks, gemma
Hello, Thank you for your question. You will need to test the Oven Sensor- PartSelect Number PS236043. You can test the sensor with a multi meter, once it is at room temp, the ohms reading should be 1100 or less. We hope that helps.
3 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
David Lindros - For model number RGB746HED2WH
March 17, 2020
When the oven is turned on, the burner ignites and the oven heats up but the preheat light stays on and every 55 seconds its sounds like its relighting
Hello David, thank you for your question. It sounds as though the igniter is causing the issue you are experiencing. This is shown as PartSelect number PS231280 on our website. We hope this helps.
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Emily - For model number RGB746HED2WH
February 17, 2020
My Hotpoint oven temperature goes up and down throughout the cooking cycle.
Hello and thank you for writing.
It certainly sounds like it could be a faulty oven ignitor PS231280 and/or possibly a malfunctioning oven temperature sensor PS236043 you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.
I don’t have an Owner Guide. I need to know where to check the pilot for the oven. Thank you.
Hello Ruth, thank you for reaching out. We have attached a relevant video that will help you to access the igniter of the oven. You can test the igniter by doing the continuity test using a multimeter. Connect the probes of the multimeter with the igniter and if the meter shows reading between 50 to 400 ohms, then the igniter has the continuity. We hope this information helps!
Was this helpful?
Thank you for voting!
Prev
1
Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Taupe/gray stove grates stained/discolored
31 of 32 peoplefound this instruction helpful.
Lee from N. Merrick, NY
Really Easy
Less than 15 mins
I could not get these grates clean, so I called Partselect and they helped me find the model of the same stove that had black grates, drip pans, and burner caps. I ordered the black grates one afternoon, and without paying for expedited shipping, they arrived the next day! They were in original GE boxes (since they make Hotpoint). I am
... Read more happy about the whole experience.
Read less
Was this helpful?
Thank you for voting!
Needed to replace the drip pans.
22 of 24 peoplefound this instruction helpful.
Shannon from Blacklick, OH
Really Easy
Less than 15 mins
Really self explanatory. Removed the old drip pans and put in the new. No tools required. However, I would like to say I received the parts the day after I ordered them. EXTREMELY FAST SHIPPING!!
While i was inserting the new lp,gas orriface to the right rear burner tube I dropped the oriface.Without looking i popped the top of the burner unit, like most older type stoves, and thats when i ran into my problem. I realized the burner tube assemblies are attached by 3 screws to the top cover.Not attached to the cabinet as the older m
... Read moreodels, Basically cracked both front aluminum tubes trying to retrieve the dropped oriface. so i had to replace the burner tube units, which involved removing 3 screws, and loosing up and removal of the nut to the main gas tube. extremely easy repair, next time i`ll try to remember look before i leap,total time to (r+r)burner tubes about 20 minutes.Parts select pulled me out of the fire on this one, great staff and service, with quick delivery.
My Orders
