All Installation Instructions for Maytag Dishwasher MDB9150AWW

Right side roller of upper basket kept coming off track because one of the 2 wheels was broken which came with the replacement strip. The plate was also broken and replaced to hold the strip in place. Easy fix.

Simply took old parts off and replaced them with new parts - no tools required.

Parts Used:

Wheel Mounting Plate

Wheel Mounting Strip Only - NO Wheels

James from Houston, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Old basket seperated on the bottom.

Removed the handle from the old basket and put it onto the new basket. The new basket is great!

Parts Used:

Dishwasher Silverware Basket

Joyce from Fort Myers, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

old spray arm broke

held spray arm to arm connector and replaced snap retainer, works like a new machine

Parts Used:

Spray Arm Snap Retainer

Phyllis Van from LODI, WI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Replaced silverware basket. No problems!

Lifted out old silverware basket. Set new basket in. Took approximately 20 seconds.

Parts Used:

Dishwasher Silverware Basket

Janet from STURGIS, KY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Wheel axle had broke and the wheel was not connected.

Actually following the online video is the way to go.

Parts Used:

White Dishrack Roller

Jeff from BURLINGTON, WI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

upper spray arm won't stay attached to dishwasher ceiling

remove damaged retainer clip. Install new one. Note: the upper spray arm screws onto the ceiling of the dishwasher with a reverse thread. That is, you need to turn it counter-clockwise to tighten it.

Parts Used:

Spray Arm Snap Retainer

Mark from MILPITAS, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Replaced wheel on rack

Snapped new wheel on

Parts Used:

Lower Wheel Assembly

Lane from ITASCA, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Upper rack rusted with many missing tines.

Remove the old rack and slip in the new one. Took 5 min to figure out how to remove the upper rack. Now have "new" dishwasher. Great service by PartSelect.

Parts Used:

Upper Dishrack with Wheels

Robert from Ashland, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Dishes not getting clean

I asked my husband if I ordered the parts would he change them for me, and when they arrived, it looked so simple I did it myself. I removed the washer arm by unscrewing the disk that holds it in place. I took the metal heat deflectors off the old arm (they just easily pried off) and put them on the new. I lifted off the large round "plate" that the arm rests on and cleaned the underside. Then put it back together in reverse order.

Parts Used:

Lower Spray Arm

Bonnie from Kenner, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

the door handle broke

I removed 6 screws and the door face came loose.I removed the old handle ,then the new one snaped in .re installed the screws and i was done.

Parts Used:

Door Latch Handle - white

david from katy, TX
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Dishwasher door leaking severely

I decided to do some regular maintenance on the dishwasher. The spray arm and components have been caked from our hard water and soap. I unwittingly broke the seal on a portion of the spray arm to try and clean. I did not know it was sealed, thought it could snap. The broken seal created a high pressure stream that pushed the door enough to let water leak out.

Replacing it was easy. Unscrewed the plastic nut, lifted out spray arm and disc, unsnapped arm from disc and replaced new one. Leak is now fixed. This part was much much cheaper than i imagined and brought new life to our dishwasher. Best.Store.Ever.

Parts Used:

Lower Spray Arm

Brandon from Mesa, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Upper rack falling out of slide rail

No Tools Required! unclip the end caps of the slide rails, slide the upper rack out of the dishwasher. Remove the broken Wheel Mounting Strip from the rack and replace with the new unit. Re-assemble the rack into the dishwasher and re-fasten the end caps. Don't forget to get the appropriate accolades from your spouse!

Parts Used:

Wheel Mounting Strip Only - NO Wheels

Gregory from Holt, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Door Latch Handle Broke in half and would not latch.

Actually, I did two repairs:
1) Ordered SUB 12002218 (Front Bowl Tine with Sleeves), part #9. Received it in the mail and made the repair in about five minutes. Then the next day the handle broke, which is repair 2.
2)Unscrewed all screws around the stainless doors (10 screws), then gently pulled up on the stainless plate at the point of the door latch. Pulled the old latch out, placed the new one in, then replaced the stainless cover and screws and it works good as new. These two repairs saved hundreds of dollars in repair costs by repair people.

Parts Used:

Door Latch Handle - white

Merton from Littleton, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Old parts had worn out

Replaced and repaired in less than five minutes using No tools

Parts Used:

Rear Bowl Tine

Folding Tines Sleeve

Adjustable Peg Clip

Front Bowl Tine

John from Mission Viejo, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

hole in spray diverter

just put the three parts together . I had the old parts to go by .

You have a terrific web site for research into exact parts needed for any appliance Keep up the good work !

Parts Used: