All Installation Instructions for Frigidaire Refrigerator LPHS2687KF4

Icemaker not pushing out ice

Consult the exploded view of the Ice Container on this site. A likely cause the end plate (17) is worn. This plate connects the rotating corkscrew to the final plastic worm that pushes the ice into the crusher and thence to your waiting glass. The worm alone will not do the trick. To replace this plate, you need to take out all of the screws you can see, including the one that holds the spring for the crusher select bar.. First, the front cover, then the plate, and finally, locking ring from the worm and the black housing for the crusher. Now you can remove the whole worm assembly. Using a cloth or rubber insulator to protect it, unscrew the end screw and slide off the crusher teeth. Store on the table as a unit to facilitate re-assembly. Slide off the old bar and worm, put them back, and re-assemble. Takes a little dexterity to get the crusher select bar back, but not hard. Easy job.

Parts Used:

Ice Dispenser Drum

DRIVE BLADE

Andrew from SALEM, MA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers

7 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Oven light bulb went dark; it needed replacing

Twisted replacement bulb into place easily. Let there be light!

Parts Used:

Light Bulb

Lise from CEDAR GROVE, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

10 of 17 people found this instruction helpful.

Was this instruction helpful to you?

Cracked in the middle

Slid the meat pan out of the fridge, popped the glass from under and removed it, popped the front of shelf upward and then slid it out, and for the new one I did everything in reverse that’s it took me less than 10 minuets.

Parts Used:

Refrigerator Shelf Frame (Glass not included)

robert from compton, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

7 of 8 people found this instruction helpful.

Was this instruction helpful to you?

bins have been broken for several years

The parts arrived much quicker than expected. The parts were exact matches and they snapped into place within minutes.

Parts Used:

Door Shelf

William from Spokane, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

8 of 11 people found this instruction helpful.

Was this instruction helpful to you?

3 door bins got broken

I ordered the parts by studying the diagram and they were perfect. Thanks for making it so easy.

Parts Used:

Door Bin - Clear

Bottom Door Bin

Lisa from Anchorage, AK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

9 of 15 people found this instruction helpful.

Was this instruction helpful to you?

I dropped and cracked the door bin

2 steps; 1. I removed the broken door bin 2. I slid the new door bin in place, Am I a genius or what!

Parts Used:

Door Bin - Clear

Melissa from Huntersville, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

7 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Frost build up on evaporator

Remove the bottom freezer drawer. Remove back metal evaporator panel. Wire in new defrost terminationT-stat. Reassemble evap panel. Good to go.

Parts Used:

Defrost Thermostat Kit

B J from Dillingham, AK
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

12 of 24 people found this instruction helpful.

Was this instruction helpful to you?

Ice maker quit working & was over flowing

We had to unhook & remove icemaker several times, thaw it out & reinstall, it would work for a day or two then overflow. Bought the new ice marker, replace it and it works great....

Parts Used:

Rear-Mount Ice Maker Assembly

kenneth from lincoln, NE
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

7 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Freezer door gasket became loose

Followed instructions for this part from this site and things went well.

Parts Used:

GASKET-FRZR DOOR,GRAY,MAGNETIC

Jerome from Detroit, MI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

I took the shelf out to wash it and it broke in a million pieces

I ordered a new shelf and I put in, less than minute

Parts Used:

Crisper Glass Insert

Beverly from PHILADELPHIA, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

plastic frame broke in front needed replaced

Well I’ve been cleaning refrigerators for 50 years... so have experience removing shelves etc., for cleaning....I removed shelf and then glass and put new one in........easy peasy

Parts Used:

Refrigerator Shelf Frame (Glass not included)

Roxie from PORT ST LUCIE, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

chrisper drawer jammed found supports were broken

Looked at video on how to remove and reinstall support and followed the instruct ions

Parts Used:

Crisper Cover Support - Front

Crisper Support - Rear

ROMAN from COLTON, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Refrigerator Light bulb went out

I replaced the bulb using my hands to twist the bulb in the socket located at the top of the refrigerator.

Parts Used:

Light Bulb

ANGELA from MEBANE, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

7 of 10 people found this instruction helpful.

Was this instruction helpful to you?

The top crisper drawer frame was cracked, it secures the glass top also.

Replaced the top crisper drawer frame. Installation was very easy. The hardest part was cleaning all of the spilled food/liquid items from under the drawers once removed to replace the top frame. I will keep the top frame and repair it. From what I have read, this is a very common problem as there is no support in the middle of the frame...it is only plastic.

Parts Used: