Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Cynthia C - December 10, 2022
Verified Purchase
Fit perfect
Arrived fast and exactly fit my ice maker machine. Fixed the problem and back to making ice.
★★★★★
★★★★★
Scott E - November 4, 2021
Verified Purchase
Ice dispenser drum
The part was in great condition and was delivered fast. Glad there was an instructional video attached, very helpful !
★★★★★
★★★★★
Jeffrey S - May 25, 2021
Verified Purchase
Repair went well, but web experience had problems
The part(s) arrived in new condition as expected, but they were clear instead of white (as in both the picture and the original); the color really wasn't an issue, so I continued with the replacement. I used the installation video provided, and it was very helpful. My only problem was when I placed the order, the website became unresponsive; I waited for quite a long time, and then clicked the button to submit the order again. I discovered later when I got two confirmation emails that two of the parts were being shipped. It was too late to change the order, so I decided to keep the other part. I imagine I'll be replacing the ice dispenser drum again in 3-5 years.
One thing that I did differently was that I got a split shaft collar and drilled a hole in it and the drive bar, then fastened them together with a screw. The drive bar was slipping on the shaft, but doing it this way should prevent issues in the future.
★★★★★
★★★★★
Connie B - January 23, 2021
Verified Purchase
I was very pleased
I received my part very quickly. I also was very pleased with the video that showed how to replace the part.
★★★★★
★★★★★
Cristine S - January 6, 2021
Verified Purchase
Out of ice!
Got the parts and was easy to install and now works like new!
★★★★★
★★★★★
Gregory D - August 30, 2020
Verified Purchase
Ice maker drum
The part is working great so far and was easily installed with the video that was provided.
★★★★★
★★★★★
Leonard C - May 29, 2020
Verified Purchase
Easy repair, working great. Apply JB Weld to worn drive blade
New part, great condition
★★★★★
★★★★★
Michael A - January 21, 2020
Verified Purchase
Easy to repair
Got the part quickly. Watched the how to video and had the job done in 30 min.
Very easy
★★★★★
★★★★★
JOHN C - May 22, 2019
Verified Purchase
Easy install
Installed the part but the dispenser is still not dispensing ice properly......rotates and dispenses 1 or 2 cubes over a period of time
★★★★★
★★★★★
ROBERT V - March 25, 2019
Verified Purchase
Part worked as expected
The part was in great condition and was on time with delivery repair went great.If we ever need anything else we will order from you first. Thank you, Robert Vaughan
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 5 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken Drum
Had to disassemble the entire ice maker bucket. Simple and straightforward, didn't need any pictures or reference materials. Just time consuming.
Jubal from OZARK, AL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The center of the plastic auger drum was broken
Had to replace with a whole new part, had to take it all apart to replace
Laura from Westville, OK
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The drum ice maker broke in half so it couldn't dependent the ice.
I had removed the housing that the drum was in and taken the screws out to get to the broken drum. I removed it there was a set of 6 blades that crushed the ice that had to go back on the same order when I removed these I put them on a piece of wire in the order they came off (so I would get them back I the correct order). Then I reversed
... Read more the order and reassembled it in the opposite direction . It was fairly easy to do. I'm a 68 year old disabled woman so if I could do it I'm sure you could to. Good luck. It cost me $14.00 if I had bought the whole assembly it would have been $150.00. So it was well worth my time and effort.
Read less
ROWENA from WIGGINS, MS
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
8 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker not pushing out ice
Consult the exploded view of the Ice Container on this site. A likely cause the end plate (17) is worn. This plate connects the rotating corkscrew to the final plastic worm that pushes the ice into the crusher and thence to your waiting glass. The worm alone will not do the trick. To replace this plate, you need to take out all o
... Read moref the screws you can see, including the one that holds the spring for the crusher select bar.. First, the front cover, then the plate, and finally, locking ring from the worm and the black housing for the crusher. Now you can remove the whole worm assembly. Using a cloth or rubber insulator to protect it, unscrew the end screw and slide off the crusher teeth. Store on the table as a unit to facilitate re-assembly. Slide off the old bar and worm, put them back, and re-assemble. Takes a little dexterity to get the crusher select bar back, but not hard. Easy job.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
September 10, 2019
How does the ice dispenser drum prevent the ice maker from making ice ?
For model number Ffhs2622mwla
Hello Scott, Thank you for the question. If the drum is broken it will not allow ice to dispense and the ice maker will see the bin is still full and not make more ice. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Art
July 27, 2021
How does the ice dispenser drum attach to the rod
For model number PS1526412
Hello Art, Thank you for the question. We suggest watching the How to Video on the site. We hope this helps! https://www.youtube.com/watch?v=msL2nKczrR8
6 people found this helpful.
Was this helpful?
Thank you for voting!
Christine
July 19, 2022
What is the measurements on this?
For model number FGHC2331PFAA
Hello Christine, Thank you for your inquiry. We show the diameter of the part is approximately 5 inches, and measures approximately 3 inches wide as per the grid of squares the part is shown against. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sharon
February 28, 2023
How do i know if it is the blade or the drum?
For model number FGUS2642LE1
Hello Sharon, thank you for the question. The ice dispenser drum, part number PS1526412, is a drum, it does not contain ice-crushing blades. Ice passes from the drum toward the crushing blades. These are ice-crushing blades, part numbers PS12728805, PS12731381, PS12731382, PS12728804, and PS12728806. We hope this information is useful!
Hello Aaron, thank you for your inquiry. This part does not fit your model. Your ice container assembly does not have an ice dispenser drum. We hope that helps!
