KPDI620T3 KitchenAid Dishwasher - Instructions

Shirley from Tucson, AZ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broken wheel

The hardest thing was getting the old one off and easy snapped the new one on

Parts Used:

Kay from Quitman, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Loose rollers/wheels on lower dishwasher tray

For several years I endured difficulty in pushing in and pulling out a fully loaded lower dishwasher tray in my KitchenAid Superba dishwasher. The tray would "fall out" out of its "track" and jam requiring me to lift up the whole tray to try to pull it out. Then one of the plastic roller "axles" broke and its wheel fell off. So I went on to Part Select's website to find a replacement. When I got it in the mail I replaced the one that broke. I noticed how much more rigid the wheel then ran on its "track." So I replaced all the roller axles and, lo and behold, the lower tray does not jam anymore. It rolls just like new! I am very satisfied. Chris from Bay Ridge, Brooklyn

Parts Used:

Christopher from Brooklyn, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Replace 2 Wheels

One of the axles broke off, requiring no removal. The other wheel broke off, but the axle remained. That required squeezing (pliers) to push out. Replacement was easy; just put wheel onto axle and push axle through mounting space. Total: 5 minute job.

Parts Used:

Robert from East Brunswick, NJ
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broken roller weels on bottom dish rack

I simply removed the broken wheel brackets and snapped new ones on. then the wheel just sliped on. It took some good hand strength.

Parts Used:

robert from coumbus, OH
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

0 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

water not going into dishwasher

While replacing the water valve I broke the float switch. Ordered the switch....it was here in 2 days. Great service! Will use this company again....I hope not all that much. lol
I am a retired Sears service tech, but not a dishwaher tech.
Love Parts Select!
Thanks guys,
Doug

Parts Used:

Float Switch

douglas from stocholm, NJ
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set, Wrench set

1 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Detergent dispenser failed to open

Removed the door cover and replaced the bi-metal.

Parts Used:

Detergent Dispenser Actuator

Mark from Norman, OK
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

5 of 22 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Old float stem had fine thread new one had corse and did not supply nut so had to use old one over.

put new switch and new gasket on old float stem with old nut. but it still overflows about 1/2 cup of water through stem

Parts Used:

Float Stem Kit

Dishwasher Gasket

Float Switch

Dishwasher Float

Daniel from Duxbury, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)

10 of 39 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

bottom tray had come off

I took off all the old axils and put new ones on,and then I slide the wheels on and That was all is to it. EASY!!

Parts Used:

BILL from LANCASTER, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

Was this instruction helpful to you?

Thank you for voting!

Needed a faucet connector

I bought the portable dishwasher on Craigslist, and it didn't have the connector that goes on the kitchen faucet. Ordered it here, got it in a few days, and didn't need any tools - just had to screw it on. Good as gold!

Parts Used:

Karen from Lafayette, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Could not fit hoses for portable dishwasher onto existing faucet

I knew I needed a faucet adapter, but thought I could just go to my local home depot and get the part...not so much. After 3 trips and not getting the part I truly needed I ordered the part from partselect. I received it literally the day after I ordered it, screwed in place with no tools, attached the coupler/hoses to the faucet and washed dishes. I wish I would have ordered the part from partselect before even bother with home depot. I would have saved myself a lot of trouble! Extremely happy! Thank you!

Parts Used:

Trisha from Oklahoma City, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

No faucet adapter

I unsrew the faucet head, and attached th e adapter

Parts Used:

Michael from Irons, MI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

The Faucet Adapter was worn out.

Ordered a new Faucet Adapter! Simple

Parts Used:

Becky from Stanley, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)

Was this instruction helpful to you?

Thank you for voting!

A gift portable dishwasher did not have the faucet adapter.

Found the adapter on Parts select through a google search. Unscrewed the existing faucet aerator and srewed in the adapter. The plastic shrink wrap holds the washer and screen in place, so don't open it until you're ready to install. Finger snug does it, only use the pliers to remover the old aerator from the faucet. Normally, I don't use pliers, but both of these parts were round and had vertical serrations to engare the plier teeth.

Parts Used: