All Installation Instructions for Frigidaire Range GLEF396ABB

right front burner would not turn off

pulled the top back cover off, removed knob on front burner control, nut and replaced-Thanks for the prompt service on the part

Parts Used:

Dual Element Control Switch

Ronald from Crescent City, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers

9 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

One section of heating element failed to heat.

Followed on-line instructions to remove the defective heating element. Some connection tabs on the replacement unit were different than the original. One tab was too wide to accept the stove's slip-on wire connector without fling down the tab width on the heating element. Thanks to some on-line instructions, wire connections to element 1a and 2a had to be reversed. If not for those instructions I would probably have ended up sending the unit back to the supplier, as an incorrect replacement !

Parts Used:

Dual Element with Limiter

Fred from VESTAL, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers

7 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Error message on display ff30

Slid oven out removed one screw one plug replaced part took 5 minutes.told parts repair the error message and they sent me the correct part in two days will use them again saved me from Repair man wanted 85 dollars just to look at it my cost was 28 for probe and 8 dollars for shipping already helped neighbor with their stove they needed new ignighter 12 dollars repair place want 110 to come look at it this site walks you through repair best service!!!!

Parts Used:

PROBE

Roger from CHICAGO, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

7 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven light bulb went dark; it needed replacing

Twisted replacement bulb into place easily. Let there be light!

Parts Used:

Light Bulb

Lise from CEDAR GROVE, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

10 of 17 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven racks rusted

Ordered new racks and replaced them.

Parts Used:

Oven Rack

Wendell from Ocala, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

11 of 21 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken Drawer Glide

It snapped right into the drawer, was very easy

Parts Used:

Rear Drawer Glide

Sharon from Hamlin, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven wasn't heating properly for a few months and then stopped altogether

The hardest part was pulling the oven away from the wall. Two bolts hold the sensor in place and a clip connects the electronics. Replacing the old one was trivial.

Parts Used:

PROBE

Matt from KENNETT SQ, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Heating element broke

Removed two screws in over pulled out part took off wires and put them on new elememt

Parts Used:

Bake Element

Joseph from Winter Park, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

8 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Watch the video on line and it was really that easy to replaced the elements

Went very well and it works!

Parts Used:

Broil Element

Joseph from HATBORO, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broken lens over oven light

Your service was OUTSTANDING...Ordered one afternoon, and before lunch time the next day, the delivery man rang my door bell...Thanks a bunch for you excellent service.....

Parts Used:

LENS

Leslie from Warsaw, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

11 of 22 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

2 elements stopped working.

My husband followed the video instructions and it was easy to fix.

Parts Used:

Radiant Element with Limiter - 1200W

Ruth from MORGANTOWN, WV
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

8 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Refrigerator Light bulb went out

I replaced the bulb using my hands to twist the bulb in the socket located at the top of the refrigerator.

Parts Used:

Light Bulb

ANGELA from MEBANE, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

7 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

old element coil burned apart breaking the circuit.

removed the old burner and put the new one in it's place.

Parts Used:

Radiant Element with Limiter - 1200W

James from WARRENTON, MO
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The elements were not heating up

It was really easy just unplugged it took off the back cover changed the part out put back cover on plugged it in and the elements were working great!

Parts Used: