59679543014 Kenmore Refrigerator - Instructions

I removed the pantry door, the pantry drawer and the glass shelf above the pantry drawer. I removed 2 screws/bolts from the left side end cap and removed it. I simply installed the new pantry end cap with the 2 screws/bolts and tightened them snuggly. I then replaced the pantry drawer ...installed the glass shelf...reinstalled the pantry door and that was it...the wife took over after that

Ok..way easy and as my kids would say "easy breezy lemon squeezy"! Even a chick can do it with the right tools! Shipping was fast, replacement part inexpensive and life now much less frustrating when all the fridge parts works!! Took out three screws, took off right drawer slide, lifted the glass on top used socket for remaining two screws and voila, reversed the steps and all was done.

First, let me say that it only broke because a teenage house guest that didn't know how to open the lid, yanked on it.

I, the lady of the house, repaired it myself. I took out the wide pantry drawer, the two smaller drawers and 1 glass shelf, unscrewed the glider rail (2 screws), unscrewed the old panel (4 nuts). Put the glider on the new panel, screwed the new panel on, put the shelf and drawers back. No Problem. Thank you.

removed crispersn glass under crispers. took out pantry drawer. removed three hex head screws , and removed pantry door holder.
replaced with ordered part and put everything back together. works great. also gave me a chance to really clean under the crispers.

Removed cover ,two veggie bins, glass glass shelf, all took 10 min. It took longer to wipe clean every thing I installed the new end cap with 3 screws, I had to add one of my own as the factory only used 2 the rear one was not installed.it didn't matter.One thing that I didn't like was the parts came with no info, but my 40 years of working for air lines made the job easy for me.

Removed the Pantry drawer, glass top and plastic supports.
Removed the Right Hand end cap by removing the three holding screws with a nut driver.
Removed the slid out metal rail from the end cap along with the slide mechanism for temperature control.
Replaced all of the parts in reverse order.

I watched a YouTube video real quick to see what I had to do and got to the job at hand. I removed the old gasket by pulling it out of the track and bring it around the front of the drawer. I wiped down the entire area where the new one would go and started inserting it into the groove, making sure it went in completely in on the bottom. I was done in less than 15 minutes. Super easy! This fixed the issue and the freezer door closes fully.

Slid the new glass in place

The Condenser Fan Motor was already removed due to searching for the problem. The new fan motor looked different from the original but I felt very comfortable that Part Select had sent me the new part showing original part number changing numbers over the years. Simply placed the fan blades onto the new motor lined up 2 of the holes placed screws and tightened then plugged the wire ribbon into the Condensor Fan Motor, plugged in the Refridgerator and it worked beautifully.

The instruction video on the Part Select Web Site made it so incredibly easy to install. Installation took under 3 minutes!

Easy- took off fruit and veg drawers out. Added support under the glass in middle. Put drawers back. For Utility door just replaced.

Like you video

Not so good that was not the problem. Fan is not seized and all the lights work and display is not on but lights up as well. No start once plugged back in after 15 minutes of being unplugged. Nothing same no change.

Watched the excellent video on Parts Select. Followed the disassembly instructions from the video and replaced it just like that. Very quick and easy because of the video.

The only reason why it took me so long to complete the repair was the fact I had to clean a spill I had from I don't know how long ago.

Saved me a ton of money doing it myself!

The installation video for condenser fan motor helped a lot to know how to disconnect the old fan motor and connect the new one. So easy just know how to remove and put back the fan gently, observe carefully where is the center and the connector position; 15 min after everything was done and the unit works well to date.

The glide was very easy to put on; however it is easiest to put in the front screw first, due to the thickness of the glide. Pretty easy!