Maytag Wall Oven Elements and Burners
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Maytag Wall Oven Elements and Burners
Your Price
$42.12
In Stock
Maytag Wall Oven Oven Bake Element
PartSelect Number PS11744404
Manufacturer Part Number WP74010750
This bake element is for the bottom of your oven. The bake element supplies heat for baking. If you find there is little to no heat when baking, a burned out bake element, or food is taking too long to cook, these symptoms could be solved by replacing the bake element. Before starting this replacement, make sure the range is unplugged from the power source or shut off from the house circuit breaker. The tools needed is a Phillips screwdriver. For safety reasons, make sure to wear gloves.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- Oven is too hot
- See more...
Installation Instructions
Heather from Huntsville, AL
The element broke in two pieces after food dried on it.
First, I unplugged the oven. Then, I removed the two screws that hold the element in place. After that, I gently pulled the element toward the front of the oven until the wires were exposed. I disconnected the wires from the old element, removed the old element and then attached the wires to the new baking element. I gently pushed the new element back into the screw holes and screwed the new element in place. When I plugged the oven back into the wall I heard a pop and thought I'd blown up the oven! Turns out the breaker popped...after fixing the breaker, I turned the oven on and the element worked just fine. I highly recommend PartSelect.com for their fast shipping and great products. I will be ordering from them again for future appliance parts.
Read more...
Your Price
$49.50
In Stock
Maytag Wall Oven Range Bake Element
Then I connected the two wires on the new element. I pushed the wires back in the insulation in the wall of the cabinet. Then I inserted the two screws and tightened them in.
SUPER EASY!!!!!
This $40 part saved me $1500 on a new double wall oven. Read more...
PartSelect Number PS11757472
Manufacturer Part Number WPY04000066
The bake element is the heating element that is found at the bottom of the oven and is responsible for 90 percent of the bake heating. This spade style bake element is 16 inches wide, and connects with push-on wire terminals. It has a terminal depth of three inches and a total element length of nineteen inches. You may need to replace the heating element if your oven produces little to no heat, the oven will not heat evenly, or the element will not heat at all. This element comes with an instructions sheet and is intended for use with electric ovens. To see if this part will fit your oven, please check the list of compatible brands below.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- Oven is too hot
- See more...
Installation Instructions
DENISE from GERMANTOWN, TN
bottom heating element in oven disintegrated
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. I threw away the old pieces.Then I connected the two wires on the new element. I pushed the wires back in the insulation in the wall of the cabinet. Then I inserted the two screws and tightened them in.
SUPER EASY!!!!!
This $40 part saved me $1500 on a new double wall oven. Read more...
Your Price
$103.35
In Stock
Maytag Wall Oven Bake Element
PartSelect Number PS11750370
Manufacturer Part Number WPW10207398
This bake element is found on the bottom of the oven.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- Oven not heating evenly
- See more...
Installation Instructions
Tim from Langley, WA
Corroded bake element
Pull it away from the wall and take everything off the back. Unscrew the element cover, cut through the insulation and remove the part. Not easy, watch for sharp sheet metal edges
Read more...
Your Price
$51.61
In Stock
Maytag Wall Oven Oven Bake Element
PartSelect Number PS11744014
Manufacturer Part Number WP74003019
This is a 2800 watt, 240-volt Whirlpool oven bake element that is sourced directly from the original manufacturer for stoves, ovens, cooktops, or range ovens. This part should be replaced if the element is not heating, heating unevenly, or is too hot. It has a terminal distance of 16 inches with a terminal depth of 3 inches. Disconnect power to the oven before replacing the bake element. Unscrew the Phillips screws directly above the element brackets to remove the existing element, and remove the wire harness without losing the wires. It is recommended to inspect the wire terminals to ensure they are not arced or burnt while the element is removed.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- Oven is too hot
- See more...
Installation Instructions
mike from gold bar, WA
burned in half
put the new element in the oven pushed wire onto connector on element held it up to match holes and put the screws back in, very easy to change. I really like the fast way I receive a part from you.
Read more...
Your Price
$95.48
In Stock
Maytag Wall Oven Bake Element
PartSelect Number PS11752537
Manufacturer Part Number WPW10310258
This bake element for your oven, range, or stove provides heat from the bottom of the appliance to cook or bake your food items. You may need to replace this part if your oven is not heating properly. This bake element is approximately 22 inches wide. Disconnect power to your appliance before completing the repair because you will be working near electrical wiring harnesses. The wiring harnesses feature slip-on terminals for easy installation. Be sure to hold the wiring harness forward so they do not fall behind the panel, as they are difficult to retrieve. This is an authentic OEM bake element.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- See more...
Installation Instructions
AL from TINLEY PARK, IL
element started sparking and caught on fire
turned off breaker for oven,opened door, removed racks,removed two screws,pulled out the element, dis connected wires,reconnected new element,put back screws,replaced racks,turned breaker on,perfect fit.
Read more...
Your Price
$80.95
In Stock
Maytag Wall Oven Range Broil Element
PartSelect Number PS11752536
Manufacturer Part Number WPW10310249
This broil element is found on the roof of the oven.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- Little to no heat when broiling
- See more...
Installation Instructions
gabrielle from Hopewell Junction, NY
Top element wasn't working on ~1.5 year old oven
FIgured it was either a bad heating element or a realy expensive repair so I purchased a replacement element to rule out the simple and inexpensive possibility. Pulled oven out from wall and disconnected power supply. Removed retaining bracket from top of oven, two screws that held in heating element, disconnected from fittings, replaced with new element, and reattached screws and retaining bracket. Plugged in power supply, tested lower oven (it worked just fine) pushed oven back against the wall. Threw away the old element and packaging. Job done.
Read more...
Your Price
$90.42
In Stock
Maytag Wall Oven Bake Element
Power off to oven, 2 screws, swapped the elements, 2 screws back in. Keep the original screws. The only delay we had was the right screw was a little hard to "start".
Once we had it tightened up, we turned the breaker back on and wah la....we had our oven back!
Shipping was much faster than expected! Read more...
PartSelect Number PS11744515
Manufacturer Part Number WP7406P272-60
This is a bake element and it is compatible with your range. The purpose of this part is to be installed inside, at the bottom of your oven. Once connected and working properly, the part should supply the heat when using the baking function. For this repair, you will need to unplug your oven from the electrical source and also make sure the oven elements and walls are cool to the touch. The most common reason for needing to install a new bake element is if your old one is not heating properly, or at all. For this installation, you will need a Phillips screwdriver and pair of needle-nose pliers.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- Oven not heating evenly
- See more...
Installation Instructions
Kathy from Powder Springs, GA
baking element burnt out
It was so easy....a cave man could do it.Power off to oven, 2 screws, swapped the elements, 2 screws back in. Keep the original screws. The only delay we had was the right screw was a little hard to "start".
Once we had it tightened up, we turned the breaker back on and wah la....we had our oven back!
Shipping was much faster than expected! Read more...
Your Price
$91.05
In Stock
Maytag Wall Oven Bake Element (19 Inch Long X 19 Wide)
PartSelect Number PS11744015
Manufacturer Part Number WP74003020
This lower oven bake element is a key heating component located at the base of electric ovens, responsible for generating consistent heat during baking and roasting cycles. Designed for compatibility with select models from Whirlpool, KitchenAid, Maytag, and related brands, it ensures even temperature distribution for reliable cooking performance. A malfunctioning element may result in uneven heating, extended cook times, or complete loss of heat. This genuine OEM replacement features female spade terminals for a quick-connect installation, allowing for secure and efficient setup. Installation typically involves disconnecting power, removing the rear panel, and replacing the element with proper terminal connections.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- See more...
Installation Instructions
Jim from Placentia, CA
Oven (not broiler) element burned out, no oven heat
Inside the oven, I removed one Phillips screw on each side where the element mounts to the back oven wall. Then disconnected the wire on each side using pliers. Unscrewed glass lens, unscrewed light bulb. Replaced all pieces in reverse order. Took less than 10 minutes.
Read more...
Your Price
$97.14
In Stock
Maytag Wall Oven Bake Element
2. Removed old element
3. Pushed eclectrial connectors onto new element and attached new element to oven with screws. Read more...
PartSelect Number PS11757476
Manufacturer Part Number WPY04100020
This lower bake element provides heat from the bottom of your electric oven, ensuring even cooking and baking. Made from a durable metal coil, it heats up as electricity flows through it. Located at the base of the oven cavity, it’s easy to replace and helps restore proper oven function when heating issues arise.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- Oven not heating evenly
- See more...
Installation Instructions
Cecil C. from St. Johns, FL
Old bake element burned out
1. Removed screws and detached push on cannectors2. Removed old element
3. Pushed eclectrial connectors onto new element and attached new element to oven with screws. Read more...
Your Price
$182.07
In Stock
Maytag Wall Oven Range Broil Element
PartSelect Number PS11750371
Manufacturer Part Number WPW10207400
This broil element is designed to provide high, direct heat from the top of the oven cavity, supporting broiling and supplemental baking functions in compatible range and wall oven models. Featuring a unique design with two outer coils and three inner loops mounted on an aluminum bracket, it connects to the appliance via four ¼-inch push-on wire terminals. Engineered for durability and consistent performance, this replacement part helps restore proper heating when the original element is damaged or no longer functioning. Always disconnect power before installation to ensure safety.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- Little to no heat when broiling
- See more...
Installation Instructions
Geraldine from SPARTA, TN
Oven not getting hot enough
Turn off oven circuit breakers. Removed builtin double unit out from enclosure to access the back. Remove sheet metal covers to expose heating element electrical connections. Double Broiler element on top should read about 33 ohms and 56 ohms. One was open so it needed replacement. Bottom hidden element should read 28 ohms. It was open. Remove broiler element screws and replace it from the front. The hidden bottom element is difficult to get at. Remove 4 screws holding up a pan with insulation. Bend it down. Using scissors I cut a long slot through the insulation to access two center screws holding the element to a long metal strip and 4 screws holding this strip to the oven frame. The screws were tight, don't strip the heads. My element was broken and distorted, so little by little you coax it out the back. Attach the mounting strip to the new element with 2 screws and slide it back in. Then reattach the mounting bracket to the frame with the 4 screws. Easier said than done..... New elements fit perfect and worked good.
Read more...
Related Maytag Wall Oven Parts
- Maytag Wall Oven Brackets and Flanges
- Maytag Wall Oven Caps and Lids
- Maytag Wall Oven Circuit Boards and Touch Pads
- Maytag Wall Oven Doors
- Maytag Wall Oven Ducts and Vents
- Maytag Wall Oven Fans and Blowers
- Maytag Wall Oven Fuses
- Maytag Wall Oven Handles
- Maytag Wall Oven Hardware
- Maytag Wall Oven Hinges
- Maytag Wall Oven Insulations
- Maytag Wall Oven Lights and Bulbs
- Maytag Wall Oven Motors
- Maytag Wall Oven Racks
- Maytag Wall Oven Seals and Gaskets
- Maytag Wall Oven Sensors
- Maytag Wall Oven Trims
- Maytag Wall Oven Wire Plugs and Connectors