Oven Bake Element WP74003019 | Official Whirlpool Part | Fast Shipping | PartSelect
Oven Bake Element – Part Number: WP74003019
( Grid squares measure 1x1 inch )
Oven Bake Element – Part Number: WP74003019 Oven Bake Element – Part Number: WP74003019 https://partselectcom.azureedge.net/Schematics/Maytag/42163.gif

Oven Bake Element

PartSelect Number PS11744014

Manufacturer Part Number WP74003019

Manufactured by Whirlpool

Product Description

Oven Bake Element Specifications

This is a 2800 watt, 240-volt Whirlpool oven bake element that is sourced directly from the original manufacturer for stoves, ovens, cooktops, or range ovens. This part should be replaced if the element is not heating, heating unevenly, or is too hot. It has a terminal distance of 16 inches with a terminal depth of 3 inches. Disconnect power to the oven before replacing the bake element. Unscrew the Phillips screws directly above the element brackets to remove the existing element, and remove the wire harness without losing the wires. It is recommended to inspect the wire terminals to ensure they are not arced or burnt while the element is removed.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Little to no heat when baking | Element will not heat | Oven not heating evenly | Oven is too hot

This part works with the following products:

Range, Wall Oven, Microwave Oven Combo.

This part works with the following brands:

Magic Chef, Maytag, Crosley, Admiral, Norge, Jenn-Air, Hardwick, Kenmore, Litton.

Part # WP74003019 replaces these:

04000058, 74003019, 74003019BU, 7406P064-60, 7406P092-60, AP6010824, WP74003019VP, Y04000058.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
10 questions answered by our experts.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Part Videos

Replacing your Magic Chef Range Oven Bake Element

Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 141 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
mike from gold bar, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP74003019
burned in half
put the new element in the oven pushed wire onto connector on element held it up to match holes and put the screws back in, very easy to change. I really like the fast way I receive a part from you.
544 of 548 people found this instruction helpful.
Was this instruction helpful to you?
Paula from Northampton, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP74003019, WP12001560
bake element and surface element not heating
THERE WERE NO PROBLEMS. THE SURFACE ELEMENT SNAPPED RIGHT IN AND THE BAKE ELEMENT SCREWED OUT AND BACK IN IN A SNAP. This was an A+experience! I found the correct parts easily using their diagrams,ordered easily and remarkably, I ordered on a sunday evening and received my order on tuesday afternoon. Could not have been happier!!
381 of 383 people found this instruction helpful.
Was this instruction helpful to you?
John from Marion, IA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
WP74003019
No heat - element had burst.
Unscrewed 2 screws holding terminal ends of the element in place. Eased the element out, until the two AC power wires were exposed. Pulled off the connectors from the element terminals (pretty tight fit - needed pliers to remove one of them).

Slipped the connectors onto the new element terminals, and eased the element back into the oven wall. Secured the element with the two screws removed previously, and that was pretty much all there was to it. Closed the circuit breakers, and the element tested OK.

Overall, a no-sweat job. One thing, though: I squeezed the oven connectors tight before pushing them back onto the new element. They had loosened up somewhat after pulling them off. A tight connection here seems pretty important, as arcing and corrosion could occur over time if they're too loose.
235 of 299 people found this instruction helpful.
Was this instruction helpful to you?
Glenn from Jupiter, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP74003019
Bake element burnt out
Before you touch anything unplug the range or trip the breaker. Pull the racks out of the oven, it gives more room to work. Remove the two screws that hold the element and pull the element out about 2-3". Disconnect the old element. Before you install the new element check the wire and the connectors for age and heat damage. If the connectors are loose replace them (2 connectors @ $1.97 is better than a short in the oven). If the insulation on the wire is degraded (brittle, flaking, brown) consider changing out the wiring. This means opening up the back of the oven and that is another chapter. In most cases you can just re-connect to the replacement element and attach it back to the oven with the two screws. I ran the oven to 400 degrees to just check that everything was OK. Spent a couple extra minutes to check everything out and save yourself pain later.
132 of 195 people found this instruction helpful.
Was this instruction helpful to you?
Eric from Tooele, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP74003019
The original heating element shorted and caught fire
The repair was simple; I removed just two screws, pulled out the wires, and slipped the two spade connectors off the original element. The repair was simply the reverse of the disassembly. The only thing to remember is to throw the circuit breaker before handling the electrical connectors. Other than that, it couldn't be any more straight forward.
89 of 151 people found this instruction helpful.
Was this instruction helpful to you?
Karen from High Springs, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP74003019
Heating Element would not heat up for Baking
Removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires and then replaced the new heating element by connecting the wires and then placing the screws back in. Was a lil difficult because this unit has no oven light and it required a flash light.
87 of 91 people found this instruction helpful.
Was this instruction helpful to you?
Randall from Williamsburg, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP74003019
element went bad..started burning like a weld
Turned off the power at the breaker box. Removed the two screws, pulled the element out about 3 inches, disconnected the two wires, reconnected the two wires to the new element, inserted element back into place, screwed in the screws...all finished...works great! Delivery was super fast...just a great experience all the way around.
20 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Ruth from Moyock, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP74003019
bake element cracked
Being a woman, I first cleaned the oven. Removed two screws holding the element in place. Pulled element out about 3 inches and disconnected one clip attached to a yellow wire another clip attached to a green wire. Put new element in connected clips. Replaced screws.
19 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Philip from Edgewood, KY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Parts Used:
WP74003019
The oven would not heat properly
Pulled the oven away from the wall. Removed two screws inside the oven. Pulled old heating element out. When I did I heard a loud pop and and saw smoke. I assumed the element would not be electrically live if the oven was not on. That was obviously incorrect. I pulled the plug and then completed the installation. I went to chruch on Sunday and thanked God that I was not electrocuted. Now the oven works fine. My wife wanted the oven to die so that she could get a new alppliance, Instead I am alive.

Seriously your service was great. Your web site pointed me to the correct part, and it arrived the next day! I would definitely use your service again if I remember your name.
13 of 14 people found this instruction helpful.
Was this instruction helpful to you?
GENE from TRENTON, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP74003019
The oven stopped heating
First I swiched off the circuit breaker just to be safe.Then I removed the two mounting screws and disconnected the the element leads. Very easy task, approx 5 mins. THANKS
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
30 Reviews
4.8
out of 5
Filter By Rating:
  • 5 Stars
    26
  • 4 Stars
    3
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11744014
Manufacturer Part Number: WP74003019
Brand
Model Number
Description
Magic Chef
3500PPA
Range
Magic Chef
3500PPW
Range
Magic Chef
3500PPW-D
Range
Magic Chef
3500SPA
Range
Magic Chef
3500SPW
Range
Magic Chef
3510KPA
Range
Magic Chef
3510KPW
Range
Magic Chef
3510KRA
Range - Freestanding, Electric
Magic Chef
3510KRW
Range - Freestanding, Electric
Magic Chef
3510PPA
Range
Magic Chef
3510PPW
Range
Magic Chef
3510PRA
Range - Freestanding, Electric
Magic Chef
3510PRV
Range - Freestanding, Electric
Magic Chef
3510PRW
Range - Freestanding, Electric
Magic Chef
3512WPA
Range
Magic Chef
3512WPW
Range
Magic Chef
3512WRA
Range
Magic Chef
3512WRW
Range
Magic Chef
3520SPA
Range
Magic Chef
3520SPW
Range
Magic Chef
3520SRA
Range
Magic Chef
3520SRW
Range
Magic Chef
3521WPA
Range - Freestanding, Electric
Magic Chef
3521WPV
Range - Freestanding, Electric
Magic Chef
3521WPW
Range - Freestanding, Electric
Magic Chef
3521WRA
Range - Electric
Magic Chef
3521WRV
Range - Electric
Magic Chef
3521WRW
Range - Electric
Magic Chef
3521XPA
Range
Magic Chef
3521XPW
Range