The bake element is the heating element that is found at the bottom of the oven and is responsible for 90 percent of the bake heating. This spade style bake element is 16 inches wide, and connects with push-on wire terminals. It has a terminal depth of three inches and a total element length of nineteen inches. You may need to replace the heating element if your oven produces little to no heat, the oven will not heat evenly, or the element will not heat at all. This element comes with an instructions sheet and is intended for use with electric ovens. To see if this part will fit your oven, please check the list of compatible brands below.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat | Oven not heating evenly | Oven is too hot
Ask our experts a question about this part and we'll get back to you as soon as possible!
16 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
November 8, 2017
My oven bake element is 16"wide x 14 7/8"deep (not including the end that plugs in). The bake element on your site appears to be 16" x 16". It might be somewhat of a tight fit. Will it work with my Magic Chef model no. 9522wuv. Double checking before i make the order.
For model number 9522WUV
Hi Steve, Thank you for the question. This element is 16"X16" including the prongs that plug in. This element is the correct part for the model number provided and shoudl be the same as what you have there now. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Justin
November 11, 2019
In addition to the lower element in the top oven will this also replace the single element in the lower oven?
For model number 9522XUB
Hello Justin, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11757472 for the Lower Oven Element and the Upper Oven Bottom Element. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Joanna
January 4, 2019
Based on my serial number, i need a series 16 heating oven element but i don't see that listed in the options? Thanks
For model number Cwe4800ace
Hello Joanna, thank you for your question. The bake element for your unit is PartSelect Number: PS11757472. Please enter the part number into the site for current price and availability. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Donna
February 20, 2019
Can’t seem to find this model online. The element is 16”x16” but the two metal clips that fit into the back of the oven are l shaped and not flat. Is there a replacement part for this? Would the same sized element with flat clips work? Thanks!
For model number Magic Chef model #96DA 4CW
Hello Donna, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PS11744510. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Warren
April 2, 2019
Replaced element still no heat.
For model number 97F. 4EXWW
Hello Warren, Thank you for the question. If the new element did not fix the issue, and all wiring of good the oven control would be defective. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joe Kavich
November 19, 2017
Can i pick up the replacement heating element from a store or dealer in the dallas area as opposed to having it shipped to me?
Hi Joe,
Thank you for your inquiry. You may be able to purchase the heating element locally. You will need to check your yellow pages and go through them to see what businesses may carry it. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tommie
March 26, 2018
I have a 15 to 20 year old stove the model number is gone. I have a picture of the bottom heating element how do i send the pucture?
For model number Unknown stove is 20 years old
Hi Tommie, Thank you for the question. You can email us a customerservice@partselect.com. We will not be able to guarantee we can locate the correct element without the model number but we will be happy to try. Please also provide as much information on the element as you can, such as measurements of the over all element and the distance between the prongs where it plugs into the appliance. Also if the prongs are screw on or push on.The more pictures the better. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kathy
January 14, 2019
Maytag wall oven. Will this part replace the current baking element?
For model number CWE4800ACE
Hello Kathy, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS11757472.Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
Jim
January 18, 2019
Serial # is 26476620jn how do i know what series i have in order to order the correct heating element, lower oven?
For model number Maytag CWE5800ACE
Hi Jim,
Thank you for your question. Manufacturers often make changes to models, which can sometimes result in different parts being used for your model. For instance, a motor may be changed mid-year, which could mean that a different wiring harness has to be used. When a series number is shown on your appliance, you will need to identify what series your appliance belongs to. The series is the first few characters of your serial number. When a given part in a model's part list has a series number, it means that the part is the right one for all models whose serial number starts with that series number, or a higher series number. If there is an exception to this rule, another part will be listed for you. To put it another way, you should select the part with the highest series number which is less than your entire serial number. So in your case it would be series 18. The part number for the bake element would be PS11757472. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Madeleine
November 7, 2018
I have a Maytag electric oven and stove. My oven element blow. I replaced it and my oven sencer went. I replaced that aswell. My oven still will not reach 400 hundred. Everey thing else works great . Boiler topof the stove clock etc. A local repairman said it could be the mother board. I would have thought nothing would work if that was the case.
For model number MER8674 AW
Hello Madeline thank you for your question. Unfortunately, if the sensor and the element were replaced and you're still not able to get the temperature regulated the issue would be the electronic control board part number PS11756979. I hope this helps!
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 38 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
heating element cracked
Easily disconnected the wires and removed cracked element and replaced with new one
Stephanie from MOUNT JOY, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element was burnt out
Shut off electricity to oven. Remove existing screws attaching element to back wall of oven. Use pliers to pull off wire connectors. To install the new element, reverse these steps. It's that simple.
Randy from METAIRIE, LA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wall Oven elements (Bake & Broil)
Followed example your provided- excellent guidance.
The oven heating element burned out and would no longer heat.
It was very simple. First thing I did was to go online to youtube and type in the kind of repair I intended to do. There were several short videos showing you how to do the replacement.It was easy and took about 30 to 45 minutes. First thing is shut off the power to the oven. ( Very important). You then need to take out two screws that hold the element in place. At this point, just pull the element toward the front of the oven. You will see some insulation at the hole where the wires come out. Slowly work the element forward until you see the fasteners on the wires ( two wires).Disconnect the fasteners and throw the old element out and put the new one in the oven.Connect the element, push everything back into the hole and screw the element to the back wall. You're done ! I had two wall ovens to fix.
Gary L. from SUN CITY, AZ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower bake element would not heat.
Removed two screws. Gently pulled old element away from back of oven, exposing two wires. Disconnected the element from wires by pulling the ends apart with hands. Reconnected the wires with new element. LESS THAN FIVE MINUTES! Saved about a hundred bucks!. (Demo on You Tube.)
Janice from SOUTHFIELD, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bake element in lower oven had burned out
I made the mistake of thinking that, if the oven was off, there would be no voltage to the heating element. Wrong! I removed the element, wearing rubber gloves just for safety, and had no problem. But when I put the wiring back on the new element and tried to slide it into the hole at the back of the oven, one of the wires brushed the metal, sparks flew, and melted one of the wires. Even though the oven was off, this wire was hot. The solution was, of course, just to turn off the circuit breaker, reconnect the wire, and slide the element back in. It works fine now.
Kevin from Berkeley, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
240 Volt Bottom Elment Burned Out
Turned breaker off to oven, removed two screws disconnected two wires. Reversed order to install. Piece of cake. Stuart,in va.
harry from front royal, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned out element
Very easy since it was an exact match to the old burned out element.
Robert from Scotch Plains, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
1 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
heating element disintegrated
Unscrewed old element from back of oven, disconnected and reinserted new element and screwed back into place. Voila! So glad to have saved the cost of a repairman. Where I live this would have been a $200 repair(part and service call) easily. This repair took no time at all. Very please as to how fast Parts service got the part to me. I use my oven a lot, so I was lost without it.
Christina from Glen Mills, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
54 Reviews
4.9
Filter By Rating:
5 Stars
49
4 Stars
3
3 Stars
1
2 Stars
1
1 Star
0
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mary Claire O - May 10, 2023
Verified Purchase
Easy as Pie!
When our heating unit started on fire, we thought we'd have to replace our oven. However, within minutes I was able to locate the replacement part & order it. It was affordable, delivered quickly, and was a breeze to install. Pronto! We couldn't be happier with the ease of the whole process, and the successful outcome.
★★★★★
★★★★★
John L - March 3, 2023
Verified Purchase
Easy fix
Part was of good quality and condition repair took no money than 10 minutes retired appliance repairman 30 plus years experience
★★★★★
★★★★★
Paul K - February 21, 2023
Verified Purchase
Not Your Fault
the part was fine but, the problem was not the coil that i ordered.....it was some kind of sensor in the back of the oven......i ended buying a new oven.......i now have a brand new heating element for the old oven......totally mea culpa......thank you for your help, anyway....
★★★★★
★★★★★
JAMES G - February 20, 2023
Verified Purchase
Works just like it should
Followed direction and done!
★★★★★
★★★★★
Keith B - January 18, 2023
Verified Purchase
Easy Repair - Great Part
Thank you for having this exact replacement part available.
Received within a few days from ordering.
It was easy to install and the Range is back in operation.
That's the key, we were able to do this ourselves.
★★★★★
★★★★★
Susana D - January 1, 2023
Verified Purchase
Excellent product
Easy to use website to order product online. The video on how to install the oven element was very helpful also
★★★★★
★★★★★
Charles H R - December 18, 2022
Verified Purchase
Easy repair
The delivery was right in time for Thanksgiving. Perfect fit too.
★★★★★
★★★★★
Tyrone J - December 11, 2022
Verified Purchase
Right part
Worked great
★★★★★
★★★★★
Mark L - November 11, 2022
Verified Purchase
Easy, Peasy repair
Quick repair, back in service in no time.
★★★★★
★★★★★
Jasmin C - April 21, 2022
Verified Purchase
Easy repair, works well??
My appliance works perfectly!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11757472
Manufacturer Part Number: WPY04000066
With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
★★★★★
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
Your Subscriptions
Same-day Shipping
Ships from USA
1 Year Warranty
365 Day Returns
