Kenmore Microwave Oven Combo Wire Plugs and Connectors

Your Price

$16.07

Kenmore Microwave Oven Combo Range Surface Burner Plug-in Block Kit

★★★★★

22 Reviews

PartSelect Number PS340571

Manufacturer Part Number 330031

The surface burner plug-in block kit features a newer-style terminal block. This kit is designed for use with ranges and cooktops. This terminal block is how the coil element on your stove connects to the inner wiring of your appliance. Without this connection your burner element would not get the electrical current it needs to heat up. When your element will not heat at all, or if it is not heating properly it is likely an issue with the terminal block. You need to remove the element to replace this part. While you have the element out, inspect the element and the terminal for any corrosion, arcing, or discoloration. If you notice any damage to the element or the terminals we recommend you replace this part as well. This kit includes two metal brackets, two pre-crimped high-temperature wire leads, two ceramic wire nuts, two heat-shrinking insulators, and a mounting screw. Before you begin this repair, make sure you have unplugged your appliance.

Fixes these symptoms

Element will not heat
Will Not Start
See more...

Installation Instructions

Jon from Oakley, CA

Surface elements quit working

Drilled out old and broken hold down clips, installed new ones(4). Cut old wires attached to surface plug in block, striped wires, and attached new plugin kit(4), warmed up heat shrink with a hair dryer, put in new drip bowels, the stove is like new.
I ordered the parts on line early one morning, the next day they were at my door and installed that day, everything that I ordered was there, and fit properly.

Way to go Part Select.com

Jon Read more...

Videos!

Your Price

$37.91

Kenmore Microwave Oven Combo Main Terminal Block Kit

★★★★★

14 Reviews

PartSelect Number PS471605

Manufacturer Part Number 5304409888

Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryers. This kit attaches the power cord to the inner wiring of your appliance. If the terminal block is faulty, your appliance will not get the power it needs to operate properly. When removing the old block pay close attention to the wire placement, this will make installing your new part much easier. If you notice any of the wires or wire terminals are corroded or damaged they will also need to be replaced.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Little to no heat when broiling
See more...

Installation Instructions

Timothy from Spring Valley, AL

Cord was not tightened enough by delivery crew.

PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful. Read more...

Your Price

$64.77

Kenmore Microwave Oven Combo Terminal Block Kit

★★★★★

13 Reviews

PartSelect Number PS953027

Manufacturer Part Number WB17T10011

This part provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).

Fixes these symptoms

Element will not heat
Will Not Start
See more...

Installation Instructions

jonathan from willow springs, IL

terminal block melted

The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient Read more...

Videos!

Your Price

$74.79

Kenmore Microwave Oven Combo Surface Burner Terminal Block Kit

★★★★★

7 Reviews

PartSelect Number PS232606

Manufacturer Part Number WB17X210

This is a surface burner terminal block kit, also known as range surface element receptacle, for an oven, range, or stove. The kit comes with the terminal block, mounting clip, and wires. This surface burner terminal block kit connects the wiring harness to the surface elements. It is important to shut off the power to the appliance before starting this repair. You will need to remove all four elements, trim rings, and drip bowls to access the terminal block on your stovetop. This is an OEM replacement part that is sourced from the genuine manufacturer.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Shaohui from East Lansing, MI

There was no heat on the coils.

I opened the lid, and found that the terminal blocks were burnt, the wires were melted. I ordered one set of terminal block to replace the burnt one, and it worked. Before I started, I shut off the electricity in the whole house to be safe. Read more...

Videos!

Your Price

$24.67

Kenmore Microwave Oven Combo Range Main Power Terminal Block

★★★★★

1 Review

PartSelect Number PS11745232

Manufacturer Part Number WP8203546

Sold individually.

Fixes these symptoms

Element will not heat
Will Not Start
See more...

Installation Instructions

Frank from Silverhill, AL

lighting strike

replaced the suppressor and terminal block oven works Read more...

Your Price

$37.91

Kenmore Microwave Oven Combo Range Terminal Block

★★★★★

6 Reviews

PartSelect Number PS232646

Manufacturer Part Number WB17X5113

This kit includes one ceramic block with 6" wire leads, 2 wire nuts and 2 heat shrink with mounting bracket.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Richard from Apex, NC

Heating element required continuous adjustments to work.

I removed old 8" surface element and terminal block. Some of old wiring had to be cut off because of harding/cracking of old wiring. Stove was 23 years old and this burner was the most frequently used one. I soldered the new and remaining old wires together. I used the shirnk wrap that came with the terminal block to cover the solder joint. I screwed the new terminal block (one screw holds it in place - used same screw from old terminal block that was removed). I finished by inserting the new surface element. Everything works fine. In the next week or two after we use it a while, I will check wiring again to make sure there are no changes. You need to be very careful as it gets very hot under the burner. Read more...