Quick Question!

Have you ever purchased from PartSelect.com before?

471605-1-S-Frigidaire-5304409888        -Main Terminal Block Kit
471605-1-S-Frigidaire-5304409888        -Main Terminal Block Kit 471605-2-S-Frigidaire-5304409888        -Main Terminal Block Kit 471605-3-S-Frigidaire-5304409888        -Main Terminal Block Kit https://www.partselect.com/Schematics/Frigidaire/UCXW2K6P.gif

Main Terminal Block Kit

Your Price

$3.62
Order within the next 1 hr and 57 mins and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS471605
Manufacturer Part Number 5304409888
Manufactured by Frigidaire

Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryers. This kit attaches the power cord to the inner wiring of your appliance. If the terminal block is faulty, your appliance will not get the power it needs to operate properly. When removing the old block pay close attention to the wire placement, this will make installing your new part much easier. If you notice any of the wires or wire terminals are corroded or damaged they will also need to be replaced.

This part works with the following brands: Frigidaire, Tappan, Kenmore, Kelvinator, Gibson, Electrolux, Crosley, Uni, Westinghouse.

This part works with the following products: Range, Wall Oven, Dryer, Cooktop, Microwave Oven Combo, Washer, Freezer.

This part fixes the following symptoms:

  • Little to no heat when baking.
  • Will Not Start.
  • Element will not heat.
  • Oven not heating evenly.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Recent

Question:

My mother has a Kenmore oven and the bake push button on the control panel does not work when you push it. The broil on low or hi works fine. Is there an individual part that i can change out so that we can bake in her oven?

Rebecca
Answer:

Hi Rebecca, Thank you for your inquiry. Usually when everything else on your panel is working just fine and your bake element is the only issue, you would need to replace your bake element. I would suggest removing the part and testing it with a multi-meter to be sure. Set your meter on the lowest setting and make sure to calibrate it to zero if you are using an analog one. If the part measures between 0 and 50 ohms of resistance, then the part is working. If your bake element checks out fine, you may have to look into contacting a technician to come and test your electronic control board. I hope this helps. Good luck with your repair.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 2 reviews What's this?
1-2 of 2
 

63 of 103 people found this instruction helpful

Parts Used:
  • Main Terminal Block Kit
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Socket set
Customer: Timothy from Spring Valley, AL

Cord was not tightened enough by delivery crew.

PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

115 of 366 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Pliers, Screw drivers
Customer: dempsey from eastland, TX

Bottom oven element not heating

replaced bottom oven element, did not fix the problem. replaced the thermostate and the terminal block and that did not fix the problem. parts select what is next?

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2

Model Cross Reference

This part works with the following models:

PartSelect Number: PS471605
Manufacturer Part Number: 5304409888
Brand Model Number Description
Tappan11-1159-00-01Wall Oven - Built-in, Electric, Wall
Tappan11-1159-00-02Wall Oven - Built-in, Electric, Wall
Tappan11-1159-00-03Wall Oven - Built-in, Electric, Wall
Tappan11-1159-00-04Wall Oven - Built-in, Electric, Wall
Tappan11-1159-00-05Wall Oven - Built-in, Electric, Wall
Tappan11-1559-00-01Wall Oven - Built-in, Electric, Wall
Tappan11-1559-00-02Wall Oven - Built-in, Electric, Wall
Tappan11-1559-00-03Wall Oven - Built-in, Electric, Wall
Tappan11-1559-00-04Wall Oven - Built-in, Electric, Wall
Tappan11-1559-00-05Wall Oven - Built-in, Electric, Wall
Tappan11-1969-00-01Wall Oven - Built-in, Electric, Wall
Tappan11-1969-00-02Wall Oven - Built-in, Electric, Wall
Tappan11-1969-00-03Wall Oven - Built-in, Electric, Wall
Tappan11-1969-00-04Wall Oven - Built-in, Electric, Wall
Tappan11-1969-00-05Wall Oven - Built-in, Electric, Wall
Tappan11-2439-00-01Wall Oven - Built-in, Electric, Wall
Tappan11-2439-00-02Wall Oven - Built-in, Electric, Wall
Tappan11-2439-00-03Wall Oven - Built-in, Electric, Wall
Tappan11-2439-00-04Wall Oven - Built-in, Electric, Wall
Tappan11-2439-00-05Wall Oven - Built-in, Electric, Wall
Tappan11-2969-00-01Wall Oven - Built-in, Electric, Wall
Tappan11-2969-00-02Wall Oven - Built-in, Electric, Wall
Tappan11-2969-00-03Wall Oven - Built-in, Electric, Wall
Tappan11-2969-00-04Wall Oven - Built-in, Electric, Wall
Tappan11-2969-00-05Wall Oven - Built-in, Electric, Wall
Tappan11-4369-00-01Wall Oven - Built-in, Electric, Wall
Tappan11-4369-00-02Wall Oven - Built-in, Electric, Wall
Tappan11-4969-00-01Wall Oven - Built-in, Electric, Wall
Tappan11-4969-00-02Wall Oven - Built-in, Electric, Wall
Tappan11-4969-00-03Wall Oven - Built-in, Electric, Wall