Hotpoint Washer Motors
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Hotpoint Washer Motors
Your Price
$61.55
In Stock
Hotpoint Washer Drain Pump And Motor Assembly
2. Removed the 2 bolts holding the Pump/Motor assembly to the machine.
3. Removed both hose clamps on the Pump/Motor assembly and removed Pump.
4. Attached the new drain inlet hose to the pump and then to the tub with the original hose clamps.
5. Attached the drain hose to the pump and then plugged in the 2 wires for the pump.
6. Plugged in the washing machine and everything worked.
NOTES:
1. Hardest part was working with hose clamps (spring type clamps) in the tight space under the machine.
2. Easier to fix since I pulled machine apart a few days before - removing the clog in the pump/motor assembly only to get everything back together to find out that the motor was dead. Still well worth the time and effort due to not having to go out and buy a new Machine... Read more...
PartSelect Number PS8768445
Manufacturer Part Number WH23X10030
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. If you notice that your washing machine will not drain, there is a good chance that you will have to replace the drain pump. The drain pump is located inside the washing machine, near the bottom. To access the drain pump for this repair, you will need to remove the front panel. Before you begin this repair, be sure that the power source is disconnected and the water source is shut off.
Fixes these symptoms
- Burning smell
- Draining Issues
- Leaking
- See more...
Installation Instructions
Gerald from Midlothian, VA
Washing Machine was not draining water from tub.
1. Drained the wash tub by taking the drain hose from the back of the washing machine and dropping it below the tub - water flowed out of hose a lot easier than trying to suck water out of tub using a pump (tried this on the first time I tried to fix washer). (Washing machine on 2nd floor of house and didn't want water running on floor)2. Removed the 2 bolts holding the Pump/Motor assembly to the machine.
3. Removed both hose clamps on the Pump/Motor assembly and removed Pump.
4. Attached the new drain inlet hose to the pump and then to the tub with the original hose clamps.
5. Attached the drain hose to the pump and then plugged in the 2 wires for the pump.
6. Plugged in the washing machine and everything worked.
NOTES:
1. Hardest part was working with hose clamps (spring type clamps) in the tight space under the machine.
2. Easier to fix since I pulled machine apart a few days before - removing the clog in the pump/motor assembly only to get everything back together to find out that the motor was dead. Still well worth the time and effort due to not having to go out and buy a new Machine... Read more...
Your Price
$121.40
In Stock
Hotpoint Washer Hp Motor & Nut
PartSelect Number PS11759153
Manufacturer Part Number WH49X25376
Enhance the performance of your washing machine with this top-notch 1/3 HP motor from GE. Specifically designed to effectively spin the basket and drive the agitator in agitation or tumbling mode, it ensures your washer is performing at its best. Remember to unplug your washer prior to installing this part to ensure safety. And don't forget to wear work gloves during installation to protect your hands. Settle only for genuine GE parts for optimal performance and longevity. Practicality and reliability make this GE Motor and Nut bundle an excellent choice for maintaining your appliance.
Your Price
$306.75
Special Order
Your Price
$65.73
Special Order
Hotpoint Washer Platfrom Motor Shield
PartSelect Number PS11736849
Manufacturer Part Number WH16X24155
Your Price
$510.32
Special Order
Your Price
$154.85
Special Order
Your Price
$196.45
Special Order
Your Price
$186.57
Special Order
Your Price
$484.43
Special Order
Hotpoint Washer Motor And Clutch Kit - 2 Speed
PartSelect Number PS783736
Manufacturer Part Number WH49X10035
The motor included in this assembly performs 1640 revolutions per minute in one speed, and 1050 revolutions per minute in the other speed. It runs at 1/2 horsepower and carries 115 volts. The capacitor and lower harness are included with the kit.
Installation Instructions
Lorenzo from Lancaster, CA
Motor making clicking sound in low speed. Bearings bad.
First I unplugged the washer from the wall and then I removed the front panel with a putty knife. I slid the putty knife in between the front panel and top of the washer to disengage the two clips (see parts diagram on Partselect.com). Then I removed the four nuts holding the motor. I then removed the motor and old belt. I installed the new motor and new belt and tightened the four nuts ensuring proper belt tension. The new motor included a new wiring harness and capacitor. The wiring harness installation instructions were easy to follow. Besure to read the all the instructions first before beginning to cut the old harness. Once the wiring harness was installed, the machined worked just like new. I did not need the Retaining Clip for Clutch since the new motor and clutch kit come as one assembly and there is no longer an actual clutch. The two-speed motor just has a pulley for the belt.
Read more...
No Longer Available
Hotpoint Washer 2-speed Clutchless Motor
PartSelect Number PS756764
Manufacturer Part Number WH20X10019
Related Hotpoint Washer Parts
- All Hotpoint Washer parts
- Hotpoint Washer Caps and Lids
- Hotpoint Washer Circuit Boards and Touch Pads
- Hotpoint Washer Dispensers
- Hotpoint Washer Drums and Tubs
- Hotpoint Washer Hardware
- Hotpoint Washer Hoses and Tubes
- Hotpoint Washer Knobs
- Hotpoint Washer Panels
- Hotpoint Washer Springs and Shock Absorbers
- Hotpoint Washer Switches
- Hotpoint Washer Wire Plugs and Connectors