Hotpoint Washer Knobs | Replacement Parts & Accessories | PartSelect

Popular Hotpoint Washer Knobs

Your Price
$5.29
D-Shaped Knob Insert Clip
PartSelect Number PS267091
Manufacturer Part Number WE1X980
This clip ensures that the knob is securely fastened to the control shaft, allowing you to properly select the correct time and setting for your dryer. If your dryer will not start or shut off, the timer will not advance, or the dryer shuts off too soon, the issue may be the control knob itself. This clip is sold individually. Although this part fits with some different brands, be sure to check the list of brands below to make sure it fits with your dryer unit. Refer to the manual provided by the manufacturer for further installation instructions.
Fixes these symptoms
Shuts off too soon
Timer will not advance
Will not shut off

See more...
Installation Instructions
Jeffery from Waterford, MI says,

Timer knob cracked twice. Found out the timer switch was bad.
Removed the 3 knobs. They just pull off. Removed 6 screws on the back side of the control panel. The front (plastic panel then just separates from the back). Then look at how the switch is mounted ...read more

Your Price
$12.12
Selector Knob with Clip
PartSelect Number PS271094
Manufacturer Part Number WH1X2721
The selector knob is what you use to start the dryer. This replacement knob comes with a retaining clip. This is a very easy repair, the only tool you may need is a pair of needle nose pliers. Remove the existing knob by pulling it off, making sure to remove the retaining clip as well. Line up the new knob with the D-shaped shaft and slide it into place.
Fixes these symptoms
Noisy
Timer will not advance
Will Not Start

See more...
Installation Instructions
SAM from ROCK HILL, NY says,

Replaced broken START knob on dryer.
Slid off the old START knob, then pushed on the new START knob.

I created and printed a label on my computer for use with the time selector dial, which must be set at or beyond 10 minutes, ...read more

Your Price
$5.29
Knob and Clip
PartSelect Number PS1482289
Manufacturer Part Number WH01X10313
This knob accepts a D-shaped shaft.
Fixes these symptoms
Timer will not advance
Will Not Start


Installation Instructions
Terri from DADEVILLE, AL says,

broken knob that turned too freely and did nothing
I wasn't sure that a new knob/clip would fix problem b/c shaft wouldn't turn with pliers. But knob was so inexpensive I wanted to try it first. I received the new knob/clip and the dryer worked perfec...read more

Your Price
$4.15
Timer Knob Clip
PartSelect Number PS270835
Manufacturer Part Number WH1X2117
The timer knob clip on your washing machine connects the timer knob to the control panel. If your timer knob is damaged or will not stay in place, you may need to replace the clip. If the timer does not advance or the washing machine will not start, this may also be a symptom of a damaged timer knob clip. This part is clear plastic and is about 1 inch in size. Many of our customers have rated this repair as easy, and the only tools you may require are a set of needle-nose pliers. This is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
Timer will not advance
Touchpad does not respond
Will Not Start

See more...
Installation Instructions
Mr Dennis from Twinsburg, OH says,

Knob would not engage, had to manually turn outer ring to start washer.
Used a screw driver and needle nose pliers to remove clip from behind the timer knob. Took 2 minutes to remove clip, i admit it was a little tricky but once you get a grip on the clip very easily remo...read more

Your Price
$10.72
Knob and Clip
PartSelect Number PS268451
Manufacturer Part Number WH01X10061
This timer knob or control knob assembly is designed for a washing machine, and comes with a retaining clip. It attaches to your timer dial and allows you to turn the timer. The main reason you would need to replace the timer knob, is if the teeth on the inside of it are worn, and will not allow you to adjust the timer. This part is sold separately from the timer dial. To complete this repair, you will need a pair of needle nose pliers to disconnect the old retaining clip.
Fixes these symptoms
Timer will not advance
Will Not Start


Installation Instructions
Scott from Denver, CO says,

Dial broke off knob. Knob stripped.
Too easy! Push on dial, push on knob, insert clip. Done. Back in the day a repairman would have probably sold me a new timer with that knob and dial!...read more

Your Price
$8.42
Timer Knob with Clip
PartSelect Number PS271124
Manufacturer Part Number WH1X2754
White in color.
Fixes these symptoms
Timer will not advance
Will Not Start


Installation Instructions
Mr Dennis from Twinsburg, OH says,

Knob would not engage, had to manually turn outer ring to start washer.
Used a screw driver and needle nose pliers to remove clip from behind the timer knob. Took 2 minutes to remove clip, i admit it was a little tricky but once you get a grip on the clip very easily remo...read more

Your Price
$14.09
Knob and Clip
PartSelect Number PS268450
Manufacturer Part Number WH01X10060
This knob accepts a D-shaped shaft.
Fixes these symptoms
Timer will not advance
Will Not Start


Installation Instructions
Ray from South Pasadena, FL says,

Broken knobs
Actually putting on a knob is self-explanatory. But wanted to say your company had the best price and reaction (delivery time). Great job by PartSelect!...read more

Your Price
$9.84
Timer Knob
PartSelect Number PS1482290
Manufacturer Part Number WH01X10314
This part is a replacement control knob for your washer. The control knob allows you to select the desired setting for your wash cycle. If your washer will not start or the timer will not advance, you may need to replace the control knob. Occasionally the control knob will become worn, and when this happens the control knob dial will not turn, and you will not be able to select the appropriate setting. If your control knob is worn, broken, or missing, you will need to replace it. The control knob is made of white plastic and is approximately 2 inches in diameter. The control knob is sold separately from the control knob dial, so be sure to confirm which part you need to complete your repair.
Fixes these symptoms
Timer will not advance
Will Not Start


Installation Instructions
Dave from West Warwick, RI says,

the teeth wore out on the control knob
I used needle-nose pliers to remove the lock tab and , in seconds, I replaced the knob !!!...read more

Your Price
$5.29
Control Knob Dial
PartSelect Number PS1482361
Manufacturer Part Number WH11X10047
Knob is not included.
Fixes these symptoms
Timer will not advance
Will Not Start


Installation Instructions
Nancy from CRANSTON, RI says,

Washer control knob and control knob broken
My son, Eddy did the repairs. He used a flat head screwdriver and a pair of pliers to remove the broken parts on the shaft. He lined up the new washer control knob dial with the notch, and pushed it d...read more

Your Price
$28.93
Knob Dial
PartSelect Number PS756514
Manufacturer Part Number WH11X10033
This part is a replacement knob dial for your washer. The knob dial rotates and allows you to select your desired settings. It is a round piece of white plastic with a small, triangular gray arrow on it. The knob dial is 3 inches in diameter and is sold individually. The control knob that attaches to it is sold separately. If your knob dial is worn, loose, or damaged, it may need to be replaced.
Fixes these symptoms
Timer will not advance
Will Not Start


Installation Instructions
Scott from Denver, CO says,

Dial broke off knob. Knob stripped.
Too easy! Push on dial, push on knob, insert clip. Done. Back in the day a repairman would have probably sold me a new timer with that knob and dial!...read more