Hotpoint Dryer Filters
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Hotpoint Dryer Filters
Your Price
$51.61
In Stock
Hotpoint Dryer Lint Filter
PartSelect Number PS11763056
Manufacturer Part Number WE03X23881
This lint filter is a genuine OEM component designed for use in both electric and gas clothes dryers. It plays a critical role in maintaining proper airflow by capturing lint and debris during drying cycles, helping prevent duct obstructions and reducing fire risk. Regular cleaning is essential to ensure efficient operation and faster drying times. If the filter’s screen is torn, the casing is cracked, or drying performance has declined, replacement is recommended. Installation is simple and tool-free—just remove the old filter as you would for cleaning, and insert the new one into the designated slot. This part is sold individually and is compatible with a wide range of dryer models.
Fixes these symptoms
- Door won’t close
- See more...
Installation Instructions
Lisha|Lamb from SHELDON, MO
Your Price
$82.97
In Stock
Hotpoint Dryer Lint Chute Assembly
My repair went off without a hitch.
2 screws removed to remove top.
4 screws removed from inside to remove front panel w/ door.
4 screws removed from top of control panel, loosed and popped top right off.
Flathead screwdriver to pop off old plastic panel.
Removed old wire chase (plastic, approx 3” long).
Removed built-up lint, wiped down area for new duct.
Snapped new duct on.
Dryer works like new!!
Took about 35 minutes, most of time spent cleaning up inside of dryer from lint due to broken duct.
One problem was that salesperson sold me on a new felt strip to go with new duct. That felt comes already installed on the new duct so I did not need it. Cost me a few extra dollars I did not need to spend.
Other than that, easy ordering, fast shipment, and parts are as close to original as possible.
Thanks for all your help! Read more...
PartSelect Number PS11763093
Manufacturer Part Number WE14X25080
This lint chute assembly is a genuine replacement component designed for GE and Hotpoint dryers. It plays a critical role in directing exhaust airflow from the dryer drum to the blower wheel, ensuring efficient drying performance. The assembly houses the lint filter and helps maintain proper airflow, which is essential for preventing overheating and reducing drying times. A damaged or clogged lint chute can restrict airflow, leading to performance issues and potential safety hazards such as lint buildup. As an OEM part, it offers a precise fit and reliable operation within compatible dryer models. Sold individually.
Fixes these symptoms
- Marks left on clothes
- Noisy
- See more...
Installation Instructions
Chad from Gilbert, SC
original duct was broken
Dear PartSelect.com,My repair went off without a hitch.
2 screws removed to remove top.
4 screws removed from inside to remove front panel w/ door.
4 screws removed from top of control panel, loosed and popped top right off.
Flathead screwdriver to pop off old plastic panel.
Removed old wire chase (plastic, approx 3” long).
Removed built-up lint, wiped down area for new duct.
Snapped new duct on.
Dryer works like new!!
Took about 35 minutes, most of time spent cleaning up inside of dryer from lint due to broken duct.
One problem was that salesperson sold me on a new felt strip to go with new duct. That felt comes already installed on the new duct so I did not need it. Cost me a few extra dollars I did not need to spend.
Other than that, easy ordering, fast shipment, and parts are as close to original as possible.
Thanks for all your help! Read more...
Your Price
$63.64
In Stock
Hotpoint Dryer Lint Filter - White Frame
Removed the top cover and front assembly w/door and front drum support, right where the unit was located. Had to gain rear access to loosen drum drive belt so undid the dryer vent hose to floor connection through a front acess hole. Moved the unit out to the breakfast nook as well as disconnecting the power cable from the wall socket. Removed the rear access panel covers and unhooked the drive belt. At the front removed the top screws off the lower cross member to allow spreading of the side covers to allow the removal of the drum. Removed drum and found the bearing bushing gone, reduced to powder.
Using the supplied instuction sheet, replaced the rear bearing assembly, replaced the drum after vacumming the whole interior and started the reassembly of the unit using the new belt and moved the unit back into place. Reconnected the power cable and dryer vent then lastly replaced the lint filter and selector knob. Closed the breaker and turned on the machine, no noise!!!
Incidently I am 78 years old. Thanks PartSelect. Read more...
PartSelect Number PS11767017
Manufacturer Part Number WE18X25100
This is a lint filter screen that is used for many dryers. It has a metal screen with a white plastic frame, and is approximately 13 inches wide. This part is sold individually. The lint filter traps lint while clothes are being dried and prevents the lint from building up in clothes and internal parts of your appliance. Neglecting to clean your filter on a regular basis can negatively affect the operation of your dryer and is also a fire hazard. Be sure to clean your filter on a regular basis. Installation is easy, simply slide the filter in and out of the filter slot.
Fixes these symptoms
- Marks left on clothes
- Noisy
- Too hot
- See more...
Installation Instructions
Edwin from Seattle, WA
Dryer making grinding noises
We live in a Condominium, space is tight especially in the Utility room where the washer/dryer are located. Turned dryer breaker off at the electical panel. Removed the top cover and front assembly w/door and front drum support, right where the unit was located. Had to gain rear access to loosen drum drive belt so undid the dryer vent hose to floor connection through a front acess hole. Moved the unit out to the breakfast nook as well as disconnecting the power cable from the wall socket. Removed the rear access panel covers and unhooked the drive belt. At the front removed the top screws off the lower cross member to allow spreading of the side covers to allow the removal of the drum. Removed drum and found the bearing bushing gone, reduced to powder.
Using the supplied instuction sheet, replaced the rear bearing assembly, replaced the drum after vacumming the whole interior and started the reassembly of the unit using the new belt and moved the unit back into place. Reconnected the power cable and dryer vent then lastly replaced the lint filter and selector knob. Closed the breaker and turned on the machine, no noise!!!
Incidently I am 78 years old. Thanks PartSelect. Read more...
Your Price
$137.15
In Stock
Hotpoint Dryer Trap Duct Assembly
PartSelect Number PS11766635
Manufacturer Part Number WE03X25275
The GE TRAP DUCT Assembly is an essential component for dryers. Its primary function is to contain and support the lint screen in the dryer's exhaust air duct, contributing crucially to the maintenance of your machine. Additionally, it provides essential support to the dryer drum during its rotation, enhancing its operation. This assembly may consist of multiple parts, consult your parts diagram for a comprehensive parts list. Remember to disconnect your dryer before commencing the installation of this part. To ensure your safety during the repair process, it is advisable to equip yourself with work gloves.
Related Hotpoint Dryer Parts
- All Hotpoint Dryer parts
- Hotpoint Dryer Bearings
- Hotpoint Dryer Brackets and Flanges
- Hotpoint Dryer Caps and Lids
- Hotpoint Dryer Circuit Boards and Touch Pads
- Hotpoint Dryer Elements and Burners
- Hotpoint Dryer Fuses
- Hotpoint Dryer Hardware
- Hotpoint Dryer Knobs
- Hotpoint Dryer Legs and Feet
- Hotpoint Dryer Motors
- Hotpoint Dryer Panels
- Hotpoint Dryer Seals and Gaskets
- Hotpoint Dryer Switches
- Hotpoint Dryer Thermostats
- Hotpoint Dryer Timers
- Hotpoint Dryer Valves
- Hotpoint Dryer Wire Plugs and Connectors