Hotpoint Dryer Circuit Boards and Touch Pads

Hotpoint Appliance Parts
Shop By Part Type

Popular Hotpoint Dryer Circuit Boards and Touch Pads

Your Price
$83.29
  In Stock
Dryer Timer
★★★★★
★★★★★
(44)
PartSelect Number PS8690648
Manufacturer Part Number WE4M533
This is a genuine OEM replacement timer (60Hz) for your dryer. To complete this repair you will need a #2 Phillips screwdriver. To access the timer, you will need to remove the top of the back panel. Disconnect the wires to the timer terminals, remove the timer knob, and unclip the timer from its metal tab. Replace with the new timer and reassemble the wires and remaining parts. Make sure to disconnect power to the dryer before beginning this repair.
Fixes these symptoms
  • Shuts off too soon
  • Timer will not advance
  • Will not shut off
  • See more...
Installation Instructions
Whitney from Vancouver, WA
START knob and plastic underneath broken
It was so incredibly simple! The site made it foolproof to find the right parts - and the actual replacement job itself was easier than we ever could have imagined. Background: I love to do laundry - I mean A LOT! So - I use the washer and dryer every night to wash the familie's clothing and blankets and towels. After heavy use - the outer knob stripped out. We threw it away and were using pliers to turn the small plastic knob underneath. After a few months - that plastic wore down and we could not turn it on at all! Read more...
Your Price
$97.13
  In Stock
Dryer Timer
★★★★★
★★★★★
(30)
PartSelect Number PS8746223
Manufacturer Part Number WE4M532
Fixes these symptoms
Installation Instructions
McKinley from Meraux, LA
the knob broke and my daughter tried turning the end of the knob with a pliers which broke the end which disabled the timer.
I unscrewed the back panel took out the broken timer replaced it with new timer put on the new knob and screwed the panel back on. Read more...
Your Price
$63.40
  In Stock
Timer
★★★★★
★★★★★
(24)
PartSelect Number PS9491767
Manufacturer Part Number WE04X20415
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
Fixes these symptoms
  • Shuts off too soon
  • Timer will not advance
  • Will not shut off
  • See more...
Installation Instructions
Jeffery from Waterford, MI
Timer knob cracked twice. Found out the timer switch was bad.
Removed the 3 knobs. They just pull off. Removed 6 screws on the back side of the control panel. The front (plastic panel then just separates from the back). Then look at how the switch is mounted on the plastic panel. There should be 2 small pieces of plastic that holds it in. Carefully twist the switch in the appropriate direction so it comes free. Before you remove any wires from the old switch remember what colors go where ! I used needle nose pliers to remove the connections from the switch. Make the new connections, mount the switch, put the screws back in the panel. BEFORE YOU DO ANYTHING. UNPLUG THE ELECTRICAL CORD !!! Read more...
Your Price
$63.40
  In Stock
Dryer Timer
★★★★★
★★★★★
(9)
PartSelect Number PS9493080
Manufacturer Part Number WE04X20089
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
Fixes these symptoms
  • Timer will not advance
  • Will not shut off
  • Will Not Start
  • See more...
Installation Instructions
tom from Ridgefield, CT
replace timer and knob
removed back panel, exchanged wires on old timer to new. Do this one at a time as there is no color chart to follow. Timer clips back in. Used a little screw to lock it in. Not sure if this was on the original but there was a place for it. Re-attached back panel and placed knob on shaft.
Overall saved a bundle as a service visit is $175.
Read more...
Your Price
$141.74
  In Stock
Timer
★★★★★
★★★★★
(1)
PartSelect Number PS267933
Manufacturer Part Number WE4M189
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
Fixes these symptoms
  • Timer will not advance
  • Will not shut off
  • Will Not Start
  • See more...
Installation Instructions
John A from Medora, IN
Timer only worked part of the time
I removed the screws holding the cover for the switches.I twisted the old timer loose.I moved wires one by one to the new timer with pliers.Lastly, I twisted the new timer to the locking position and replaced the cover.Everything now works fine Read more...
Your Price
$160.74
  In Stock
Timer
PartSelect Number PS267932
Manufacturer Part Number WE4M188
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
Fixes these symptoms
Installation Instructions
Richard from Marshall, MI
Timer stopped moving on dry cycle
Unplugged the dryer. Took the four star screws out of the console top. Pull consoled forward. Removed the knob. Pull up the locking tap on the old timer and twisted the timer counter clockwise. Timer easily detached from its mounting plate. Changed one wire at a time from the old to the new timer. Replaced timer and knob and screws.
Works great.
Read more...
Your Price
$122.25
  In Stock
Timer - 60Hz
★★★★★
★★★★★
(2)
PartSelect Number PS268240
Manufacturer Part Number WE4X795
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
Fixes these symptoms
  • No heat or not enough heat
  • Timer will not advance
  • Will not shut off
  • See more...
Installation Instructions
Frank from Lakewood, CO
Dryer performed erratically. Timer stopped. Heat element would not come on.
Removed two torx screws from the control panel. Removed timer with socket wrench and disconnected socketed electricals. Everything went slick. Read more...
Your Price
$151.74
  In Stock
Timer
PartSelect Number PS268236
Manufacturer Part Number WE4X791
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
Fixes these symptoms
Installation Instructions
George from Lebanon, TN
Intermittent then no heat
First guess is one of the thermostats. Used ohm meter to test all 5 thermostats. All looked good. (first clue) Bypassed all thermostats, dryer worked. Ordered thermostats. (a couple at a time) Replaced thermostats. Dryer did not work. Tested heating element. Looked good. (Second Clue) Replaced heating element. Still no go! Dryer started working then stopped. Very confused. Ordered timer. Replaced timer. Everything great! Works like a new one. Moral to this story, trust your meter! Should have been a very easy repair. Replaced belt while dryer apart. Read more...
Your Price
$165.77
  In Stock
Timer
PartSelect Number PS268235
Manufacturer Part Number WE4X790
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
Installation Instructions
Gregg from SAN JOSE, CA
Timed dry cycle didn't work and "dryness" cycle never stopped once started.
Unplugged the dryer from the 240V supply. Unscrewed the 5 hex screws securing the sheet aluminum panel on the back of the dryer's front panel. Slid into the back panel was a schematic and diagnostic flow chart. The flow chart indicated that either the timer or resistor was at fault. (The chances of a resistor failing is very low. But, I checked it's resistance and connections just to be sure.) Ordered the new timer and installed it. In addition to removing the 5 hex screws securing the back panel, the timer was secured by two additional hex screws of the same size. I disconnected the electrical connectors and slid out the timer. The timer's dial needed to be pried off and installed on the timer. Reassembly involved doing the same steps above in reverse order. Read more...
Your Price
$143.34
  In Stock
Timer
★★★★★
★★★★★
(1)
PartSelect Number PS268298
Manufacturer Part Number WE4X872
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
Installation Instructions
Tom from Lawrenceville, GA
Timer was no longer counting down to finish
Removed the screws holding the Top of the Dryer control panel. Pulled the top off, The section with the controls hinged down for easy access.
Used needle nose pliers to pull off the wiring harness. The timer module has grooves that all you need to do is turnit a quarter turn and it pops right out, no screws or funny clips, real easy.
The new Timer goes in just as easy, line up the tabs with the slot and quater turn locks it in. Repalce wiring harnes on same pins as removed, screw the top back in place and good to go!
Read more...

Related Parts