GE/GE_Thumb/00123819i01.gif
See part 100 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Dryer Timer

★★★★★
★★★★★
30 Reviews
$94.27   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS8746223
Manufacturer Part Number WE4M532
Manufactured by GE
Troubleshooting
This part fixes the following symptoms:
Timer will not advance | Will Not Start
This part works with the following products:
Dryer.
This part works with the following products:
General Electric, Hotpoint.
Part# WE4M532 replaces these:
AP5788219, WE4M362
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

40 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Caitlin
December 4, 2017
The timer knob on my dryer broke off, i then just simply used a tool to twist it to turn on well it has broken off completely and i can no longer twist to turn on my dryer. Will this part fix my problem.?
Hi Caitlin, Thank you for your question. If the shaft on the timer is broken, then the timer is the part that you will need to replace. I hope this helps. Thank you and have a great day!

81 people found this helpful.

Was this helpful?
Thank you for voting!
Bonnie
August 22, 2017
How can i get the instructions on installing the new timer i ordered? Hotpoint dryer Model: Htdx100em8ww Timer:Part number: PS8746223. Thank you.
For model number PS8746223
Hello Bonnie, thank you for contacting us. We have a how to video with our expert Steve that will show you how to install that part at the link below. https://www.youtube.com/watch?v=1VuG5JxD8qo

25 people found this helpful.

Was this helpful?
Thank you for voting!
Jessica
September 30, 2017
I need to replace the timer on my dryer? Model htdx100em8ww is this easy to do? Or do i have to pay a fortune and have someone else do it??
For model number HTDXEM8WW
Hi Jessica, Thank you for your inquiry. The timer should not be that difficult to replace. There is a video on our website that you can reference on how to install the. You will find the video under part number PS11742167. I hope this helps. Thank you and have a great day!

10 people found this helpful.

Was this helpful?
Thank you for voting!
SABLE
May 8, 2018
Hi, the timer knob broke off of my dryer and i was using a tool to twist the little metal part ( timer i guess) that sticks out, but now it has broken off also. What parts are needed for this repair?
For model number HTDX100ED0WW
Hello Sable, thank you for your question. You will need to purchase the Timer PartSelect Number: PS8746223 and the Timer Knob PartSelect Number: PS1482196. Please enter the part number into the site for current price and availability. Good luck with your repair!

9 people found this helpful.

Was this helpful?
Thank you for voting!
Chona Gaitan
September 8, 2017
What kind of timer do i need for this model htdx100ed6ww dryer?
For model number HTDX100ED6WW
Hi Chona, Thank you for your inquiry. The correct timer for your appliance is part number PS8746223. I hope this helps. Thank you and have a great day!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Rick
August 15, 2017
Will the part select number and the manufacturer number fit my model dryer?
For model number HTDX100EM2WW
Hi Rick, Thank you for your inquiry. The part select number is our catalogue number for the part. Those two numbers are for the same part. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Rick
March 1, 2018
The timer well not turn so if it will not turn the dryer well not work right
For model number HTDX100EM8WW
Hi Rick, Thank you for your question. If the timer is not advancing, then it is likely the timer, but I would also check the cycling thermsotat as well to see if it is causing the issue as well. You can test both parts with a multimeter. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Brian
March 3, 2018
The part picture looks the same on the GE website, but the last few numbers do not match my Hotpoint dryer's control timer part number. Can you help, i already received an incorrect part.
For model number HTDX100ED6WW
Hello Brian, Thank you for your inquiry. We do show that part# WE4M532 is the timer switch that is listed as compatible to the model number you provided. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Robert
February 28, 2018
I bought a new timer and knob but how do wires go back on
For model number HTDX100EM8WW
Hi Robert, Thank you for the question. Please see the link below on how to install a timer. Hope this helps! https://www.youtube.com/watch?v=1VuG5JxD8qo

1 person found this helpful.

Was this helpful?
Thank you for voting!
Mechelle
August 1, 2018
What would make the timer knob not want to turn? Than when I did get it to turn it kept turning but no clicking and when took it off the knob was cracked
For model number HTDX100EM8WW
Hello Mechelle, Thank you for the question. This would be a defective and stripped timer switch that the timer knob would control. The Part Number: PS8746223 will need to be replaced. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 8 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    the knob broke and my daughter tried turning the end of the knob with a pliers which broke the end which disabled the timer.
    I unscrewed the back panel took out the broken timer replaced it with new timer put on the new knob and screwed the panel back on.
    • McKinley from Meraux, LA
    • Difficulty Level:
      Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Screw drivers
    • Parts Used:
      WE4M532, WE1M652
    183 of 241 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    There was nothing wrong with the timer, but the cheap, soft plastic post that connected it to the knob broke off inside the knob.
    First, I unplugged the dryer, carefully so as not to electrocute myself. Then, I removed the panel on the top, back of the dryer, using a Phillips screwdriver. Then I removed the old timer and unplugged all the connectors, one at a time, so as to make sure I plugged them back in to the correct positions on the new timer. I had to use pliers because they were very hard to remove. Then, I plugged them into the same positions on the new timer, which was easy. Then I replaced the timer into position. Then, because I could not use the old knob since it still had part of the old cheap soft plastic post stuck inside it, I took a knob for the power rinse control off of my washer, since I never use that anyway, and I put it onto the new cheap soft plastic post on the new timer, and it works like a charm. I plan to be very, very gentle with that knob, knowing, as I do, that the post that it turns is not much harder than room temperature butter and that, if I break it, it will cost me over $70 dollars to get another one, and it also will not even contain a new knob, even though the one I borrowed from my washer will be unusable because it will have half of the old post stuck in it. Finally, I replaced the panel on the top, back of the dryer and plugged in the dryer.
    • Frank A from PHARR, TX
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Pliers, Screw drivers
    • Parts Used:
      WE4M532
    10 of 12 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    dryer would not run. The knob was cracked and the little piece inside was broke. Had to use pliers to run 2 loads.
    My husband took top off back and went in that way and it was simple to fix. Thank youi
    • Mary Ann from LAWRENCE, KS
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    • Parts Used:
      WE4M532, WE1M652
    8 of 11 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Timer locked up, will not turn
    From behind the dryer remove the panel directly behind the timer assembly (6 phillips head screws).
    Take a picture at this point of how the wires are attached to the timer assembly for reference during reassembly Then remove wires with pliers. Remove T10 Torx screw that retains the timer assembly in place. Remove timer Knob (pull forward). Rotate timer assembly to pop it out.
    From here, twist in new timer, use T10 torx to hold in place re-attach wires and reinstall rear panel
    • Matthew from Millbury, MA
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Pliers, Screw drivers
    • Parts Used:
      WE02X20846, WE4M532, WE1M652
    7 of 7 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    D-knob broke in the old one.
    Took back top off of dryer.5 wires connected to timer.I took 3 off,after unplugging dryer first,of course.I remembered which wire went where,then unplugged other 2.Replaced the back of dryer.Plugged it in,works just fine.Wife happy,me happy.
    • Thomas from LEON, WV
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Pliers, Screw drivers
    • Parts Used:
      WE4M532
    5 of 5 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    knob broken and the timer shaft was broke off
    Very Easy installation. Took the back panel off, disconnected the timer, replaced it with new timer from partselect.com., then I put everything back together and attached the knob. The dryer works great and no more pliers!. Thank you to the associate that help me make sure I had the correct parts, and I am very satisfied with the service. I would Recommend this sight to anyone. Thanks Again.
    • Frances A from OSSINEKE, MI
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    • Parts Used:
      WE4M532, WE1M652
    3 of 3 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Knob kept turning around without clicking
    Husband took off the back of dryer and took off old timer and replaced it with the new, put on new knob, worked great, Ordered it on day, and we received it the next day, thank you for the quick delivery.
    • Susan from Latham, OH
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Pliers, Screw drivers
    • Parts Used:
      WE4M532, WE1M652
    3 of 4 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    My dryer timer was defective
    I simply took the back panel behind the timer unplugged the old part and when the new part came in I hooked it back up in less than 5 minutes. I did mark each wire to match order I took them out.
    • Jeanette from ODESSA, TX
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Screw drivers
    • Parts Used:
      WE4M532
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      30 Reviews
      4.5
      Filter By Rating:
      • 5 Stars
        24
      • 4 Stars
        2
      • 3 Stars
        1
      • 2 Stars
        0
      • 1 Star
        3
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS8746223
      Manufacturer Part Number: WE4M532
      Brand
      Model Number
      Description
      General Electric
      DBLR333EG1CC
      Dryer - Electric
      General Electric
      DBLR333EG1WW
      Dryer - Electric
      General Electric
      DBLR333EG2CC
      Dryer - Electric
      General Electric
      DBLR333EG2WW
      Dryer - Electric
      General Electric
      DBLR333EG3CC
      Dryer
      General Electric
      DBLR333EG3WW
      Dryer
      General Electric
      DBLR333EG4CC
      Dryer
      General Electric
      DBLR333EG4WW
      Dryer
      General Electric
      DBLR333EG5CC
      Dryer
      General Electric
      DBLR333EG5WW
      Dryer
      General Electric
      DBLR333EG6CC
      Dryer
      General Electric
      DBLR333EG6WW
      Dryer
      General Electric
      DBLR333EG7WW
      Dryer
      General Electric
      DLLLR33EJ0WW
      Dryer
      General Electric
      DLLLR33EJ1WW
      Dryer
      General Electric
      GHDX100EM0WW
      Dryer
      General Electric
      GNSR465EBAWW
      Dryer
      General Electric
      GNSR465EBBWW
      Dryer
      General Electric
      GNSR465EBCWW
      Dryer
      General Electric
      GNSR465EBWW
      Dryer
      General Electric
      GTDX100EM0WW
      Dryer
      General Electric
      GTDX100EM1WW
      Dryer
      General Electric
      GTDX100EM2WW
      Dryer
      General Electric
      GTMX100EM0WW
      Dryer
      General Electric
      GTMX100EM1WW
      Dryer
      General Electric
      GTMX100EM2WW
      Dryer
      General Electric
      GUSR465EBAWW
      Dryer
      General Electric
      GUSR465EBBWW
      Dryer
      General Electric
      GUSR465EBCWW
      Dryer
      General Electric
      HBXR333EJ1WW
      Dryer

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service