Frigidaire Cooktop Elements and Burners | Replacement Parts & Accessories | PartSelect

Popular Frigidaire Cooktop Elements and Burners

Your Price
$8.23
Terminal Block Kit
PartSelect Number PS470125
Manufacturer Part Number 5303935058
This part connects the wire harness to the surface element and is used for ranges. The kit includes interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing, and wires. If your range/oven is having symptoms such as burner not heating, heating elements not working, burning smell, or if the oven is making a buzzing noise then this could be the solution. The tools needed to replace the kit are wire strippers, a heat gun or hair dryer, and #1 square heard screw driver. Refer to the installation/instructional video for further guidance to accurately replace the element.
Fixes these symptoms
Element will not heat
Will Not Start


Installation Instructions
Steven from Taylors, SC says,

rental property stove only had 2 working burners and bottom drawer off track
first i took out burners then i took out the screws of the termnal block bracket. i then raised the lid on the stoveand clipped the wires on all 4 of the terminal block kits.i then slipped the shrink...read more

Your Price
$16.16
Surface Element - 8 Inch - 220V
PartSelect Number PS2339241
Manufacturer Part Number 316442300
If the burner element on your range will not heat up, or is damaged, it may need to be replaced. This part is 8 inches in diameter, and should not be confused with the smaller 6-inch model. The part is 220 Volts and 4 Turn. The burner element connects to the terminal block inside the range. To do this repair, simply remove the old surface element and replace it with the new part. This product is sold individually. As the surface element is hot when it is on, be sure to unplug the range from the power source before completing this repair.
Fixes these symptoms
Element will not heat
Will Not Start


Installation Instructions
Kathy from Lebanon, IN says,

burner quit working
pull out old burner, lifted range top change the terminal which took about 5 min. close top put new burner in and was ready to go. works great....read more

Your Price
$20.83
Surface Element - 8 Inch - 2600W
PartSelect Number PS2339242
Manufacturer Part Number 316442301
The range surface element provides heat to the cooking surface on top of the range. The element has a universal plug, is 8 inches in diameter, spans 5 coils in width and reaches 2600 watts. Before you begin your repair, ensure that the elements are turned off and have had time to cool. Once you have removed the element this is a good time to ensure the terminal is in good condition (they can wear over time) which may need to be replaced as well. This quick repair requires no tools except gloves for safety, and a small amount of time.
Fixes these symptoms
Element will not heat
Will Not Start


Installation Instructions
David from Encinitas, CA says,

burner shorted out
I followed the directions by clipping wires to old burner socket, splicing the wires to new terminal block, screwing down new "block bracket," and plugging in new burner....read more

Your Price
$12.86
Surface Element - 6 Inch
PartSelect Number PS2582086
Manufacturer Part Number 318372210
This part is sold individually. This is a part for your stove top. The surface element is what your cookware sits on. The element supplies heat at varying temperatures. This may need to be replaced if the coil has shorted out or the terminal block shorted, and this caused the connectors at the end to burn out. The element is set in place by springs. You will need to push the springs in to release the old element. Make sure the drip bowl is lined up with the terminal block and press the new element into place.
Fixes these symptoms
Element will not heat


Installation Instructions
Chhabildas from Charlotte, NC says,

Enement was blew out.
I order the Element and received just in 4 days. It is Real incredible. I just opened the box and replaced the burners....read more

Your Price
$29.69
6-Inch Coil Burner Element
PartSelect Number PS2368974
Manufacturer Part Number 318372211
This element is a genuine OEM replacement part, has looped terminal ends, comes with a black medallion center, and fits most electric ranges. All burners are made of a heating wire that produces heat from electricity. Remove the non-functional burner element from the terminal block (or receptacle). Use a multi-meter to check for continuity. Check the end of the terminals for corrosion or heat damage. If there is corrosion or heat damage, replace the whole terminal block or receptacle at the same time you replace the damaged coil. Before you start this repair, make sure that the element is turned off and cool to the touch.
Fixes these symptoms
Element will not heat


Installation Instructions
Steve from North Troy, VT says,

replaced elements
pull the element out and slide the new element in.No tools needed,it's that easy....read more

Your Price
$30.20
Surface Burner Cap - Black
PartSelect Number PS2581740
Manufacturer Part Number 316261804
The surface Meduim 9.5K burner cap is located on the top of the burner head and is used in ranges and ovens. The burner cap helps spread out the burner flame for even heating, and protects the burner head from cooking spills. Without the cap you can have a burning gas torch. If your cap is missing or is discolored, replacing this part can solve the issue. This part comes in the color black. Remember to unplug your range from the power source and allow surface to cool before installing this part. Refer to the manual provided by the manufacturer for further installation instructions.
Fixes these symptoms
No Symptoms for this part
Your Price
$120.94
Dual Element with Limiter
PartSelect Number PS2581859
Manufacturer Part Number 316555800
Dual Element with Limiter -9 Inch /6 Inch - 1300W 1200W. With this element, you can adjust the size of the burner you want to use to match your pots/pans.
Fixes these symptoms
Element will not heat


Installation Instructions
Tom from Wallingford, CT says,

Burned element
Flip up top, remove wires and two screws. Replace in opposite way. Turn off power to stove first....read more

Your Price
$22.18
Surface Burner Igniter Electrode
PartSelect Number PS436633
Manufacturer Part Number 316011200
Use this igniter with sealed burners.
Fixes these symptoms
Element will not heat
Gas igniter glows, but will not light
Will Not Start

See more...
Installation Instructions
Rusty from Howell, NJ says,

Igniter porcelain was cracked and burner would not light.
un-pluged stove,removed the one screw holding the broken igniter. disconected the one wire. installed new igniter and slipped on wire. The igniter came with a new bracket, the old one rusted away w...read more

Your Price
$120.44
Radiant Surface Element
PartSelect Number PS2361362
Manufacturer Part Number 316135401
This part is the heatsource. This surface element is for ranges. Surface element supplies the heat to a cooking area on top of the range. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
Element will not heat


Installation Instructions
STEPHEN from GREENBUSH, ME says,

9" radiant burner element stopped working.
VERY IMPORTANT! kill the circuit breaker to the unit and/or unplugged it! 2 screws hold the ceramic glass top to the lip @ top of oven--remove them and the top can be lifted up to expose all the burne...read more

Your Price
$104.84
6" Radiant Element with Limiter - 1200W - Left Rear
PartSelect Number PS1528719
Manufacturer Part Number 318178110
This is a six-inch radiant element with limiter. It works in conjunction with your stove top range. The purpose of this part is to heat up the cooking area that is located on top of the range, also known as your stove top. If you suspect that your surface element is not properly heating then you may want to test the element for continuity. This model is sold individually and is 1200 watts. The tools you will need for this installation include a Phillips screwdriver and a 14-inch nut driver.
Fixes these symptoms
Element will not heat
Will Not Start


Installation Instructions
James from WARRENTON, MO says,

old element coil burned apart breaking the circuit.
removed the old burner and put the new one in it's place....read more