This part is the heatsource. This surface element is for ranges.
Surface element supplies the heat to a cooking area on top of the range.
Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Wall Oven, Cooktop.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Tappan.
Part# 316135401 replaces these:
AP4416812, 316224200, 316224201, 318198835
Customer Reviews
Average Rating:
★★★★★
★★★★★
9 Reviews
3.8
Filter By Rating:
5 Stars
4
4 Stars
3
3 Stars
0
2 Stars
0
1 Star
2
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ronnie H - September 7, 2022
Verified Purchase
Thank you!
Thanks, it was simple.
★★★★★
★★★★★
Jordany R - February 28, 2021
Verified Purchase
Work as expected
My appliance is back to working correctly.
★★★★★
★★★★★
Perry L - February 13, 2019
Verified Purchase
perfect fit
after the part came, it was a easy fix. and a perfect fit. i will get more of what I need when I need it from partselect. good place to get parts from
★★★★★
★★★★★
Chen Yi W - February 10, 2019
Verified Purchase
Easy to repair.
It took me 12 days to received this part after putting my order. Website didn't show the quantity of the parts in stock or out of stock.
★★★★★
★★★★★
Juris S - September 28, 2018
Verified Purchase
Thankful for the fix.
It was brand new, easily installed and works like it should. Thank you.
★★★★★
★★★★★
Tang D - July 27, 2018
Verified Purchase
bad
bad bad real bad with customer service ,talk with customer service they keep said yes i know see part but they send wrong parts two time and go around around and wrong again never this happens again .
★★★★★
★★★★★
Douglas B - July 13, 2018
Verified Purchase
Easy repair worked great
Appliance works now
★★★★★
★★★★★
BING ZHEN S - May 2, 2018
Verified Purchase
Not the same as the picture
When I got the part, the wire is different. The picture of the part is same as my old one, but the part I received looks different . So I have to return it.
May 2, 2018
Thank you for your review. From reviewing your order we show that you have already contacted us to set up a return. If there is anything we can do for you in the future, please let us know.
★★★★★
★★★★★
William M B - March 10, 2018
Verified Purchase
Very easy repair - part delivered quickly
A total of 4 screws and 15 minutes was all that was involved in this repair. Would definitely order from PartSelect again. Thanks
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 8 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The surface element quit working, when I tried to remove it, the element cracked.
Turn power off to the stove! Opened the oven door, removed 3 screws holding the top down. Lift the top up. (Take a picture first of where exactly the wires go and where the prongs go) I unplugged the 4 wires from the element. Use a screwdriver and pry the prongs through the metal brace. Remove the prongs from the old element because they
... Read moreare a separate part and don't come with a new element. If you wish to continue to use the stove, tape the ends of the wires up, because they will be hot when you turn any other burner on.
Read less
Lucas from HOPKINSVILLE, KY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
9" radiant burner element stopped working.
VERY IMPORTANT! kill the circuit breaker to the unit and/or unplugged it! 2 screws hold the ceramic glass top to the lip @ top of oven--remove them and the top can be lifted up to expose all the burner elements and wiring--remove the 2 end screws that hold the retainer bracket for the burners - then remove the 2 screws that hold the burne
... Read morer in question to the bracket-there's also a retainer pin that needs a bit of fussing with to completely free the burner--once totally free remove the wires from the bad unit to the good unit exactly as they are situated --install new unit onto bracket with screws and bracket back to its original location on the ceramic top-put top back down and replace both anchor screws--initiate power back to unit and yeeehahh--You just saved yourself lottsa money from repair bills!!!
Read less
STEPHEN from GREENBUSH, ME
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
46 of 54 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner failed due to poor manufacturing quality
Disconnected power. Removed hold down fasteners for stove top. Fortunately, I did not flue down or use the double back tape to secure stovetop to counter. If this adhesive were used, it is possible I would have had great difficulty in removing range. I did not disconnect the wiring, but turned the range top over to access the cover.
... Read more I removed the cover and easily removed the failed burner and installed the new ones. I had to pull 4 wires from the terminal strip and reattach them. The hold down strap for the burner was reinstalled. Range top turned back over and fastened down. Back in service.
Read less
LaVern from Cedar Falls, IA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
13 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One element in a glasstop range would not engage
All of a sudden, one element in our glasstop range would not light and heat up. My wife and I were not sure what to do. Looked it up on the internet, found that you can do it yourself as others desribed the process of accessing the elements below. We decided to do that. It takes two people as one is holding up the glass because it ope
... Read morens like a car hood. While we diagnosed it was not a wiring issue (found a burnt wire, rewired the burnt wires (after mending the non burnt portions) to another element. The element that was not working before still did not turn on. Decided to purchase an element. While many online places sell elements, PartSelect actually allowed searching by brand with exploded views of the range to select the exact parts. This lessened the worry of purchasing a wrong element. When the part came (almost one day later), the repair was less than five minutes. Thank you PartSelect. I feel I saved a lot of money and aggravation.
Read less
Kwok from Silver Spring, MD
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
16 of 20 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front Right Radiiant burner was damaged
Followed the instruction printed on the page, while ordering the part.
Rashiklal from Marietta, GA
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver
12 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner would not heat
killed the 50 amp power. removed 3 screws from above oven door slid out cook top, dropped brace holding 2 front burners. The connector corroded off had to look for a high heat connector to connect to the element, after that just screwed everything back together.
Ed from Winthrop, MA
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
19 of 22 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Connection to surface element was broken
I went all the way around the unit and removed screws holding top of unit in place. Removed knobs holding front panel in place. Remove control panel. top should come off. Remove screws attaching element top and metal frame. Undo bracket and remove element. Disconnect wires. Remember where they were attached. Replace element and rever
... Read morese steps.
Read less
javier from oceanside, CA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
17 of 27 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
right front element burned out
FIRST I UNPLUGGED THE GLASS TOP RANGE. While locating the part on the PartSelect diagram I was also able to determine how to access the burned out element. It was very simply to remove three phillips head screws in the front top( above the oven)area of the range, slide the topof the range forwardand lift it up, remove one screw holding th
... Read moree metal bar under the element, replace the element by usinga a pair of pliers to remove the electrical wires and then reversed the process. I saved a tidy amount doing the job myself.
Read less
Larry from Wenatchee, WA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
44 of 52 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
24 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Leonard
February 6, 2018
Does this part number 316135401 have two elements in one like my stove. My outer element burn but my inside one wont burn. Facing stove it's on the right up front.
For model number FEFL79GCA
Hi Leonard,
Thank you for your question. No, this is not the correct surface burner element. The part number listed under your model number for the dual surface burner element is PS1528431. I hope this helps. Thank you and have a great day!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Marie Bryans
January 30, 2019
Facing my glass top stove, my left front element will not heat up. Two questions.... how do i know if it is the switch or the element? the element doesn't seem like it's dual.
please send me part numbers to both the switch and the correct element. thank you!
For model number FEFL68GMA
Hello Marie, Thank you for your question. I suggest checking the following parts: PS1145040 Infinite Burner Switch - 8" - 240V, and PS2361362 Radiant Surface Element. You can check these parts with a multimeter. We do have an informative video on our website if you are unfamiliar with how a multimeter functions. https://www.youtube.com/watch?v=bWC44fHn0As Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
January 27, 2018
The burner is 9". Is this the correct part.Jim
For model number FEP366ECD
Hello Jim, Thank you for your inquiry. Yes, we do show that this is the 9 inch element for your model. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Joan G.
March 12, 2018
Right front dual burner, ( sm. Element ) will not work. Can you tell me if this is the correct part that i need, or do i need two parts?
For model number FEFL79GBA
Hello Joan, Thank you for your inquiry. The right front dual burner element you would need to replace is part# 316464901. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
James
February 27, 2020
I want to replace the entire cooktop. It has 4 glass burners. What is the price?
For model number 790.96012405
Hi James, thank you for your question. The part you are requesting on has been discontinued and we have no known replacement listed in our system. We have no further information. You are welcome to contact the manufacturer of the part to see if they have recently released a new substitute. This was the part number: 316456241. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Thanh
August 28, 2017
Left rear radiant element burn out . What's part number ?
For model number 79095042503
Hi Thanh,
Thank you for your inquiry. I have attached the part that you are looking for in a link down below. Good luck with your repair.
My right front element will not come on anymore, your parts don't say if it's the large or small element.Please advise, i need this for christmas!
For model number FEFB66ECF
Hi Cathy,
Thank you for your question. The part number for the left front burner element is PS2361362. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Edward
August 30, 2021
I am replacing a 316224201 burner which is now changed to 316135401. The wiring configuration on the 316135401 is different. Can you assist with the conversation to this new unit?
For model number 316135401
Hello Edward, Thank you for the question. There are numbers on the back of the element. There will be a black that connects to 2a, and one to 1b. The grey will connect to 2b and the orange will connect to the element. We hope this helps!
Was this helpful?
Thank you for voting!
Jimmy
December 18, 2021
What is the part number for right front radiant surface element for this unit?
For model number FEC30S6ABC
Hello Jimmy, thank you for writing. We have researched the model you have provided and have found the part you are looking for is Radiant Surface Element PartSelect Number PS2361362. We hope to hear from you soon.
Was this helpful?
Thank you for voting!
Milton
July 3, 2023
What diameter size fits this model number .
For model number fef364dse
Hello Milton, thank you for the question. There are four surface elements in your model. The left front and right rear elements, part number PS978580, are six-inch elements. Both the left-rear and right-front elements, part numbers PS1528763 and PS2361362, are nine-inches. We hope this helps!
