Official Frigidaire Cooktop Parts | Order Today, Ships Today

Your Price

$12.16

Drip Bowl - 8"

★★★★★

(97)

PartSelect Number PS437595

Manufacturer Part Number 316048413

This chrome drip bowl is designed for use with electric cooktops and ranges. This drip bowl is sold individually. At the widest point this part has a diameter of approximately 10 inches. It sits beneath the surface burner element. It catches any drips or spills coming from the cookware on your burner. Because the cooktop is a high-traffic area of the kitchen, these bowls often get damaged, or get so dirty they can no longer be adequately cleaned. When replacing this part you need to remove the burner element. While you have it out we recommend inspecting the terminals and the element for any corrosion, arcing, or discoloration. Any of those things could be a sign of a bigger problem, and it indicates that the element and terminal block should be replaced.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

John from Nisswa, MN

Old pans/bowls were corroded

Very easy---simply unplug the burners, remove the old pans and replace with the new ones

I was extremely pleased with the easy ordering and prompt delivery of parts that actually fit as they should! Read more...

Chrome Drip Bowl - 6" – Part Number: 316048414

Your Price

$9.36

Chrome Drip Bowl - 6"

★★★★★

(76)

PartSelect Number PS437596

Manufacturer Part Number 316048414

The drip bowl catches grease and spills that come from cooking on your stove top. They are located under the heating elements. Drip bowls are often neglected and can become rusted and cracked. If your drip bowl is damaged, it could allow grease, food, or other spills to drip inside your range. This could become a fire hazard. This 6 inch chrome drip bowl fits most electric ranges. Before you replace your damaged drip bowl, make sure the element is turned off and cool to the touch. To replace the drip bowl, remove the element, replace the current drip bowl, and reattach the element. This part is sold individually.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

John from Nisswa, MN

Old pans/bowls were corroded

Very easy---simply unplug the burners, remove the old pans and replace with the new ones

I was extremely pleased with the easy ordering and prompt delivery of parts that actually fit as they should! Read more...

Terminal Block Kit – Part Number: 5303935058

Your Price

$9.63

Terminal Block Kit

★★★★★

(33)

PartSelect Number PS470125

Manufacturer Part Number 5303935058

This part connects the wire harness to the surface element and is used for ranges. The kit includes interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing, and wires. If your range/oven is having symptoms such as burner not heating, heating elements not working, burning smell, or if the oven is making a buzzing noise then this could be the solution. The tools needed to replace the kit are wire strippers, a heat gun or hair dryer, and #1 square heard screw driver. Refer to the installation/instructional video for further guidance to accurately replace the element.

Fixes these symptoms

Element will not heat
Oven not heating evenly
Will Not Start
See more...

Installation Instructions

Steven from Taylors, SC

rental property stove only had 2 working burners and bottom drawer off track

first i took out burners then i took out the screws of the termnal block bracket. i then raised the lid on the stoveand clipped the wires on all 4 of the terminal block kits.i then slipped the shrink wrap on wires and used the wire nuts to connect wires together then heated the shrink wrap. I then put screws back in terminal block brackets. I then put the burners on while looking under lid so i would know they were making good connections as this is a bad design from factory. if you pull out burners to clean them and they are not put back in right you dont have a good connection and that causes the terminal blocks to get hot and melt. thats what happened in my case.
As far as the drawer glides they just snap into place Read more...

Your Price

$29.40

CAP

★★★★★

(5)

PartSelect Number PS11775705

Manufacturer Part Number 5304508442

The surface Meduim 9.5K burner cap is located on the top of the burner head and is used in ranges and ovens. The burner cap helps spread out the burner flame for even heating, and protects the burner head from cooking spills. Without the cap you can have a burning gas torch. If your cap is missing or is discolored, replacing this part can solve the issue. This part comes in the color black. Remember to unplug your range from the power source and allow surface to cool before installing this part. Refer to the manual provided by the manufacturer for further installation instructions.

Your Price

$29.77

CAP

★★★★★

(6)

PartSelect Number PS11775704

Manufacturer Part Number 5304508441

Sold individually. This part helps the flame to spread for even heat. Also protects your burner head from spills.

Surface Element - 8 Inch - 220V – Part Number: 316442300

Your Price

$34.18

Surface Element - 8 Inch - 220V

★★★★★

(23)

PartSelect Number PS2339241

Manufacturer Part Number 316442300

If the burner element on your range will not heat up, or is damaged, it may need to be replaced. This part is 8 inches in diameter, and should not be confused with the smaller 6-inch model. The part is 220 Volts and 4 Turn. The burner element connects to the terminal block inside the range. To do this repair, simply remove the old surface element and replace it with the new part. This product is sold individually. As the surface element is hot when it is on, be sure to unplug the range from the power source before completing this repair.

Fixes these symptoms

Element will not heat
Will Not Start
See more...

Installation Instructions

Kathy from Lebanon, IN

burner quit working

pull out old burner, lifted range top change the terminal which took about 5 min. close top put new burner in and was ready to go. works great. Read more...

Main Terminal Block Kit – Part Number: 5304409888

Your Price

$15.12

Main Terminal Block Kit

★★★★★

(12)

PartSelect Number PS471605

Manufacturer Part Number 5304409888

Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryers. This kit attaches the power cord to the inner wiring of your appliance. If the terminal block is faulty, your appliance will not get the power it needs to operate properly. When removing the old block pay close attention to the wire placement, this will make installing your new part much easier. If you notice any of the wires or wire terminals are corroded or damaged they will also need to be replaced.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Little to no heat when broiling
See more...

Installation Instructions

Timothy from Spring Valley, AL

Cord was not tightened enough by delivery crew.

PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful. Read more...

Surface Element - 6 Inch – Part Number: 318372210

Your Price

$34.28

Surface Element - 6 Inch

★★★★★

(9)

PartSelect Number PS2582086

Manufacturer Part Number 318372210

This part is sold individually. This is a part for your stove top. The surface element is what your cookware sits on. The element supplies heat at varying temperatures. This may need to be replaced if the coil has shorted out or the terminal block shorted, and this caused the connectors at the end to burn out. The element is set in place by springs. You will need to push the springs in to release the old element. Make sure the drip bowl is lined up with the terminal block and press the new element into place.

Fixes these symptoms