PLGC36S9CCA Frigidaire Cooktop - Overview

Diagrams for PLGC36S9CCA

See every part. Know exactly what you need.

Parts for the PLGC36S9CCA

$52.96

Burner Cap - LF, LR, RR

★★★★★

(1)

Part #316213500

This burner cap is a replacement cooking surface component designed to distribute heat evenly across the burner. It is commonly replaced when chipped, warped, or damaged by heat exposure.

$88.15

Control Knob

Part #318099100

Sold Individually.

GRATE BURNER

★★★★★

(4)

Part #318937101

Kit of 4.

$42.61

Burner Pan Gasket

Part #318053901

Liquid collecting beneath a burner pan may mean the surrounding gasket is damaged or out of place. The seal sits between the cooktop and drip pan to block spills from leaking through the joint. First check that the pan is seated correctly and that food buildup is not holding it above the surface. Match the replacement to the complete mode...Read more

Read less

$75.92

SPARK MODULE

★★★★★

(2)

Part #808608804

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$54.10

Burner Igniter

★★★★★

(1)

Part #318148700

Also known as spark electrode. This part helps your burner ignite and produce flame.

$108.21

Burner Pan - Medium

Part #318168114

Small Burner Cap

Part #316206600

Sold individually.

Burner Pan - Large - Right Front

Part #318168124

Igniter Switch

Part #316032002

When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.

Burner Pan - Small - Right Rear

Part #318168104

This has a small center hole.

Bushing

Part #318146301

Manuals & Care Guides for PLGC36S9CCA

Click to download

Install

Installation Instructions

Common Symptoms of the PLGC36S9CCA

How this model fails, and the parts that fix it.

Will Not Start

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

gas ignitor continued to run after turned on or off

10 of 13 people found this instruction helpful.

Duff from Buena Vista, CO
Easy
30 - 60 mins
Screw drivers

Removed all of the grates, control knobs and gas diffusers. Unscrew the drip pans, two on each pan, which attach the pans to the gas supply. Raised the drip pans from the top and unplugged the ignitors from all pans. Remove the top and the rubber deflector over the ignitor switch. The ignitor switch snaps off and on. One of the seals unde ... Read more

Read less

Was this helpful?

Gas stove won’t light on half the appliance

4 of 9 people found this instruction helpful.

Julieta from ELMIRA, NY
A Bit Difficult
1- 2 hours
Screw drivers, Socket set

First we replaced the wiring harness because a multi-meter said it wasn’t getting power. That was only partially true. The wiring harness was burned looking so we just kept it instead of sending it back. When the spark module got here the burner caps were removed and then the wires were noted where they went on the module and then the pow ... Read more

Read less

Was this helpful?