Cub Cadet Lawn Mower Engines

Your Price

$133.81

PartSelect Number PS16444663

Manufacturer Part Number 84005207

This is a genuine Toro replacement part. The camshaft is designed by the manufacturer for use in lawn tractors and engines. This part is made of metal, and is placed in the crankcase assembly to interact with the crankshaft. It comes with two metal tappet valves. You may require a wrench when replacing this item. This part is sold individually.

Your Price

$12.74

Cub Cadet Lawn Mower Push Rod

PartSelect Number PS11835540

Manufacturer Part Number 13116-0725

This replacement push rod is specially designed for Kawasaki engines. It is an authentic high quality item that is sourced from original equipment manufacturer. The rod rides is attached to the camshaft to push the exhaust valve open during the exhaust stroke. A bent pushrod can not only affect your engine's performance, but it can also seriously damage other parts if the problem is not taken care of immediately. Please note this metal push rod is sold individually.

Your Price

$15.87

Cub Cadet Lawn Mower Rod-push

PartSelect Number PS9063658

Manufacturer Part Number 691758

This replacement push-rod is a genuine manufacturer supplied item that is specially designed for Briggs and Stratton engines. The push rod rides on the camshaft to push the exhaust valve open during the exhaust stroke. A bent push rod can seriously affect your engine's performance and it damage the engine if the problem is not taken care of immediately. This part is made out from durable aluminum and it is sold individually.

Installation Instructions

GERALD from CLIO, MI

Exhaust push rod

Reverse of how i took broken exhuast value out.
It was simple just watch what you do. Also make sure you lash the value. U tube it. Read more...

Your Price

$11.86

Cub Cadet Lawn Mower Engine Oil

PartSelect Number PS12614640

Manufacturer Part Number 08207-10W30

Honda engine oil, SAE 10W-30, One quart

Your Price

$236.36

Cub Cadet Lawn Mower Head-cylinder

★★★★★

2 Reviews

PartSelect Number PS16443470

Manufacturer Part Number 84001919

This authentic component is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or a faulty cylinder head that was installed on a new unit. Please make sure to check appropriate diagrams for the correct location and use of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually. Note it includes all the necessary gaskets and seals.

Installation Instructions

Robert from WHITMAN, MA

the head blew a vaulve guide destoying push rods

about 6 hours to tear down and replace don't do it in the hot sun needed more breaks takes longer, but the new factory heads did it started up 185 lbs of compression almost back to new, so much more power than old one's. FYI take off the motor cover every year clean out the debris (grass-mouse nest- and oil) it blocks the air and COOKS THE HEAD it only takes short time and will make that motor last a little longer but it is a BRIGGS engine Read more...

Your Price

$6.63

Cub Cadet Lawn Mower Push Rod

PartSelect Number PS8860046

Manufacturer Part Number 13116-2057

This OEM Push Rod is a silver, metal part, approximately 5.5 inches long. It can be installed using a wrench or sockets. A Spark Plug Gap Tool may also be needed for maintenance. The installation of this partis rated as Medium difficulty by customers. It attaches inside the cylinder head, and is installed by tightening the rocker nut on top to manufacturer specs. This part opens and closes the intake and exhaust valves, and if broken there will be poor engine performance as well as an internal knocking or tapping sound from the engine. If damaged, likely due to fatigue or stress, it must be replaced. Refer to your owners manual or model number to ensure you are slecting the correct part.

Your Price

$18.89

Cub Cadet Lawn Mower Rod-push

PartSelect Number PS9064819

Manufacturer Part Number 691836

This is a genuine manufacturer-approved replacement part which is specially designed for use on Briggs and Stratton engines commonly installed on lawn and garden equipment. The push rod rides on the camshaft to push the exhaust valve open during the exhaust stroke. A bent rod can not only affect your engine's performance, it can seriously damage other parts if the problem is not taken care of immediately. Keep in mind this high-quality part is made of durable metal and is sold individually.

Your Price

$30.01

Cub Cadet Lawn Mower Rod-connecting (standard)

PartSelect Number PS17579420

Manufacturer Part Number 84007297

This is a genuine Briggs & Stratton replacement part that has been sourced from the original manufacturer to be used with small engines and lawnmowers from Toro. The metal connecting rod is used to link the engine's piston and the crankshaft assembly. This item is sold as a single item.

Your Price

$40.69

Cub Cadet Lawn Mower Gear-governor

★★★★★

1 Review

PartSelect Number PS9151758

Manufacturer Part Number 793338

Ensure smooth and balanced operation of your Briggs and Stratton engine with this exceptional Gear Governor. It's intricately designed to maintain control over the speed of the engine, contributing to its performance and efficiency. Crafted by industry-leading brand, Briggs and Stratton, this gear governor guarantees durability and reliability. Experience enhanced functionality and prolonged engine life with this essential element. Designed for consistent fit and easy installation, upgrade your engine's performance with Briggs and Stratton's Gear Governor.

Fixes these symptoms

Engine over revs or will not rev
See more...

Installation Instructions

rodney from MUSCATINE, IA

governor not working

Had to pull the engine off the rider mower. Drained the oil took shield off the flywheel. Set it upside down on a 5 gal bucket. Took a 7/16 hand wrench to remove governor lever from bottom of engine. Left it in its location. Pulled 10 1/2 " bolts. Split engine case. Found the old governor had broke into pieces. Had to use a magnet to remove all the pieces. Removed the small clip and removed gear. Lubed shaft slid new on put new clip on. Lined governor weights with center piece tapped it in place very lightly. Cleaned gasket flanges pulled the shaft seal. Used the old seal as a seal driver. When putting the cover back on make sure the seal dont roll out. Take a mini screwdriver and tuck it in around shaft. Put bolts back in and tighten like instructions Read more...

Your Price

$11.91

Cub Cadet Lawn Mower Reed-breather

PartSelect Number PS9064775

Manufacturer Part Number 697124

This is a genuine Briggs and Stratton, Toro part for use with lawn and garden equipment engines. The crankcase breather valve opens to relieve pressure in the crankcase. The most common reason for replacing the breather is when the small engine runs poorly. This part is sold individually. Here is a list of tools that are needed to replace the breather valve a flat-head screwdriver, hammer, 7/16th-inch socket, 3/8th-inch socket or nut driver, Phillips-head screwdriver, 5/16th-inch socket or nut driver, 3/8th-inch socket or nut driver, pliers.

Shop by Department

Top Appliance Brands

Top Lawn Equipment Brands

Popular Cub Cadet Lawn Mower Engines

Related Cub Cadet Lawn Mower Parts

Shop by Department

Top Appliance Brands

Top Lawn Equipment Brands

Sample Model Number Tags

EasyApplianceParts is Now PartSelect!

Cub Cadet Lawn Mower Engines

Find Your Part

Popular Cub Cadet Lawn Mower Engines

Related Cub Cadet Lawn Mower Parts