Cub Cadet Lawn Mower Carburetors

Cub Cadet Lawn Mower Carburetor Overhaul Kit

★★★★★

★★★★★

4 Reviews

This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of reasons. When your carb becomes clogged, it is often a good idea to take it apart and replace the various parts inside by purchasing a carburetor kit. This is a 15-piece set and contains everything that you will need to do a total overhaul of your carburetor. You may want to purchase some carb cleaner as well, to ensure that the new pieces in the carb kit fit and adhere properly.

Cub Cadet Lawn Mower Primer-Carburetor (7/8"Dia. Fits BS Quantum Engines 5, 5.5 &6 HP

★★★★★

★★★★★

2 Reviews

Cub Cadet Lawn Mower Diaphragm-Carburetor

★★★★★

★★★★★

3 Reviews

This is a carburetor diaphragm, which is an OEM part that pumps fuel from the tank to the engine. It is roughly 1x2 inches and black in color. Sold individually, this part can fail due to fatigue and wear, and if it is broken you may notice your engine is running rough or not starting. If your engine exhibits these signs of being starved of fuel, your diaphragm is damaged and needs to be replaced. Our customers found this repair to be of medium difficulty. It requires a wrench, screwdriver, and pliers to complete. You will be able to locate your diaphragm inside the carburetor itself to swap it out with your new one.

Cub Cadet Lawn Mower Kit-Needle/Seat

★★★★★

★★★★★

1 Review

This needle and seat kit, also known as a float valve, is found in many types of liquid-fueled lawn equipment, such as carburetors. The valve regulates the flow of fuel into the float bowl. The needle and seat work together to make sure that the valve opens and closes properly, so that it does not leak or overflow. If it is broken, you may notice a strong odor of fuel coming from your machine. Your engine may also run poorly or not start at all. A damaged or corroded float valve can cause fuel leaks, which can be dangerous as they are flammable. To remove the float valve, first disconnect the spark plug wire on your machine. You then need to consult your user manual to locate the float bowl of your machine and remove the bolts or screws securing their cover in place. When you lift off the cover, you will find the needle attached to the float. Using a pair of needle-nose pliers, grasp onto the needle and pull it out of the float. Keep in mind when you are purchasing this OEM-manufactured kit that it comes with the needle and seat together, but the float itself is not included.

Cub Cadet Lawn Mower Primer-Carburetor

Cub Cadet Lawn Mower Diaphragm-Carburetor

★★★★★

★★★★★

2 Reviews

Cub Cadet Lawn Mower Carburetor

★★★★★

★★★★★

1 Review

This is an Authentic OEM replacement part used on Lawn and Garden Engines. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won\'t start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem. This Assembly includes a Metal Body Carburetor, Rubber O-Ring and a Gasket. When replacing Carburetor it is advised that you also replace Carburetor Gaskets to ensure proper Air Tight Seal for optimum performance. You will need a Screwdriver to perform this repair.

Cub Cadet Lawn Mower Bowl-Float

★★★★★

★★★★★

1 Review

Cub Cadet Lawn Mower Carburetor This genuine OEM replacement carburetor is designed for use with lawn and garden equipment. It mixes air and gas before the fuel mix goes to the engine. This kit includes a metal body carburetor and gasket If the engine won\'t start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem. To complete this repair you would need a screwdriver. • Remove the air filter cover • Remove the air filter base • Turn off the fuel • Remove the fuel line • Remove the throttle linkage • Remove the carburetor • Replace the throttle linkage • Connect the fuel line to the carburetor • Replace any damaged/old gaskets • Reassemble the carburetor and air filter base • Mount the carburetor and air filter base • Reinstall the air filter • Replace the air filter cover

Cub Cadet Lawn Mower Carburetor

★★★★★

★★★★★

1 Review