Cub Cadet Lawn Mower Spindles

Your Price

$138.14

Cub Cadet Lawn Mower Lawn Tractor Mandrel Assembly

PartSelect Number PS11813284

Manufacturer Part Number 918-04822B

Original Manufacturer Approved replacement Spindle Assembly 6.3 Diameter used on Lawn Tractors/Mowers. Includes Housing, Shaft assembly, Bearing, Pulley and nut. The mounting holes on the Mandrel are not threaded. But the bolts that are used to secure the mandrel to the deck are self tapping. The Mandrel shaft goes thru the deck and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys.

Your Price

$152.48

Cub Cadet Lawn Mower Spindle And Pulley Assembly

PartSelect Number PS12087458

Manufacturer Part Number 918-04125C

This item is a genuine replacement part that has been OEM sourced and is intended to be used with riding lawnmowers from MTD and Yard-Man. The pulley assembly is a complete part that includes the spindle housing, shaft, bearings, and pulley. This item is used to mount the pulley to the deck and to link it to the blades so the belt can rotate the blade. This item is available as an individual replacement part.

Your Price

$145.31

Cub Cadet Lawn Mower Spindle Assembly With Pulley

PartSelect Number PS12681864

Manufacturer Part Number 918-06980

Spindle asm-blade

Your Price

$170.90

Cub Cadet Lawn Mower Spdl Asm-pulley &

PartSelect Number PS16449928

Manufacturer Part Number 918-0624B

This is a genuine replacement part sourced directly from the original manufacturer. This assembly consists of metal parts and it is sold individually. This is the part that houses shaft that mower blade attaches to, it is mounted to the deck of the mower by four (4) bolts (sold separately). Please note that the mounting holes on mandrel housing are not threaded. Bolts that are used to secure the mandrel to the deck are self tapping. When doing this repair you would need a set of wrenches. • First remove the blade from the mandrel shaft • Remove the four (4) screws that are holding mandrel to the deck • Then, you will need to remove the nut that is attached to the mandrel shaft, which is located above the mandrel pulley. The complete mandrel assembly should come right out now. • Attach the new mandrel assembly back to the deck • Attach and secure pulleys, belts and blades