Craftsman Trimmer Seals and Gaskets
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Craftsman Trimmer Seals and Gaskets
Your Price
$6.40
In Stock
Craftsman Trimmer Carburetor O-ring
Additional information: rather than mixing my fuel, I purchased 40:1 pre-mix fuel to prevent gunking up the carburetor in the future. I use it in my other trimmer and have not had any issues. Read more...
PartSelect Number PS9118815
Manufacturer Part Number 753-06185
This is a manufacturer approved O-Ring designed for lawn and garden equipment. This is the O-Ring that provides an Air Tight seal between Carburetor and Cylinder Head. If doing maintenance on carburetor it is recommended to replace the O-Ring instead of re-using the old one. Over time rings and seals tend to dry out and would no longer provide proper seal compromising engines performance.
Installation Instructions
Ricardo from FORT WORTH, TX
Trimmer Would Not Start
The replacement of the carburetor, O-ring, and gasket was simple. I removed 2 screws that held the air cleaner and carburetor in place, swapped them out, and replaced the screws. What took longest was finding a piece of fuel line after breaking one of them. It was brittle after hanging in my garage for several years. I found some in my garage and replaced it. It took a few pulls to get it started, but ran very smooth. Additional information: rather than mixing my fuel, I purchased 40:1 pre-mix fuel to prevent gunking up the carburetor in the future. I use it in my other trimmer and have not had any issues. Read more...
Your Price
$6.40
In Stock
Craftsman Trimmer Carburetor Gasket
PartSelect Number PS9119051
Manufacturer Part Number 753-06253
This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carburetor and the air cleaner assembly. It is recommended to replace gaskets when servicing the motor to ensure proper seals when the parts are reassembled. This item is available as an individual replacement part.
Installation Instructions
john from SHARPSVILLE, PA
string trimmer would not start
emptied fuel from tank. pulled off the 2 fuel lines from the carburetor.opened the air cleaner door. removed the 2 torque screws that hold on the carburetor. removed the carburetor and air cleaner gasket. installed new carburetor and gasket and put back and tightened the 2 torque screws. closed air cleaner door and pushed the fuel lines onto the new carburetor.put some fuel in the tank. started the trimmer. runs great.
Read more...
Your Price
$30.58
In Stock
Craftsman Trimmer Walbro Gasket/diaphragm Kit
PartSelect Number PS9285128
Manufacturer Part Number 530069844
This is an authentic OEM replacement kit for use with lawn and garden equipment. Each kit includes the carburetor, cylinder, crankcase, and muffler gaskets. The carburetor gasket seals the area between the carburetor and engine block to prevent the entry of contaminants into the carburetor. The crankcase gasket prevents oil from leaking out of the crankcase. The cylinder and muffler gaskets prevent the combustion and exhaust gases from escaping. If you are experiencing common problems such as leaking, loss of compression, and poor engine performance this indicates that your gaskets may be worn down or damaged and need replacement. Carefully remove the old gaskets and thoroughly clean the mating surfaces where the new gaskets will be installed to ensure a good seal. Install the new gaskets and ensure that they fit properly.
Your Price
$7.70
In Stock
Craftsman Trimmer Carburetor Gasket
PartSelect Number PS9136642
Manufacturer Part Number 791-181709
This is a genuine manufacturer sourced replacement part designed for use with handheld lawn and garden equipment. It is utilized to create an air-tight seal between the carburetor and the insulator. Over time seals tend to become brittle and compressed eventually requiring replacement. This part is made from durable composite material and it is sold individually.
Your Price
$6.40
In Stock
Craftsman Trimmer O-ring
PartSelect Number PS9120828
Manufacturer Part Number 753-06174
This authentic manufacturer-approved component which is specially designed for use with handheld lawn and garden equipment. The purpose of this o-ring is to provide an air-tight seal between connected parts, unfortunately, over time it may wear out and begin to crack eventually requiring a replacement. Please make sure to check appropriate diagrams of your model for the correct location and application of this o-ring. Keep in mind this high-quality item is made of durable rubber and is sold individually.
Your Price
$7.01
In Stock
Craftsman Trimmer O-ring, Carburetor
PartSelect Number PS9136074
Manufacturer Part Number 791-181751
This is a genuine replacement part from original manufacturer. It is compatible with Ryobi, MTD, Troy-Bilt, Yard Man, and Bolens machines. It\\\'s used with a variety of power tools including trimmers, tillers, and blowers. O-rings create a seal between solid parts, retaining pressure. Because many machines use more than one type of O-ring, use care to ensure that the right one is being used in the right spot. This ring is sold individually.
Your Price
$6.40
In Stock
Craftsman Trimmer Crankcase O-ring
PartSelect Number PS9118309
Manufacturer Part Number 753-06275
This is an authentic manufacturer-sourced replacement o-ring which is specially designed for use with handheld lawn and garden equipment. It helps to provide an air-tight seal for the crankcase, over time the material tends to deteriorate and crack eventually requiring replacement. It is a high-quality component which is made of durable rubber and it is sold individually.
Your Price
$6.40
In Stock
Craftsman Trimmer Insulator O-ring
PartSelect Number PS9120832
Manufacturer Part Number 753-06184
This is a genuine replacement part manufactured for use with gas-powered lawn and garden equipment. The insulator o-ring is used to form a seal between the insulator assembly and the cylinder. This o-ring is available as an individual replacement part and is included with the insulator assembly part number 753-06189.
Your Price
$18.34
In Stock
Craftsman Trimmer Kit, Carb. Gasket
PartSelect Number PS9030255
Manufacturer Part Number 545008086
This is an authentic OEM sourced part that is intended to be used with trimmers and brushcutters from Husqvarna and Jonsered. The gaskets are used to mount the carburetor to the engine's intake. It is recommended to replace the gaskets when servicing the carburetor to ensure proper seals when the parts are reassembled.
No Longer Available
Craftsman Trimmer Gasket Set
PartSelect Number PS12602552
Manufacturer Part Number 530071750
This is a Manufacturer Approved replacement kit used on a variety of Gas Trimmers/Pruners. This gasket set includes the major gaskets to replace when rebuilding the engine. Its purpose is to make an air tight seal so that no air/oil leakage occurs. Over time gaskets tend to deteriorate and will need to be replaced. Gaskets in this kit are made out of Composite Material and O-Rings are made out of Rubber.
Related Craftsman Trimmer Parts
- Craftsman Trimmer Bearings
- Craftsman Trimmer Blades
- Craftsman Trimmer Brackets and Flanges
- Craftsman Trimmer Caps and Lids
- Craftsman Trimmer Carburetors
- Craftsman Trimmer Engines
- Craftsman Trimmer Filters
- Craftsman Trimmer Gears
- Craftsman Trimmer Handles
- Craftsman Trimmer Hardware
- Craftsman Trimmer Hoses and Tubes
- Craftsman Trimmer Knobs
- Craftsman Trimmer Manuals and Literatures
- Craftsman Trimmer Motors
- Craftsman Trimmer Pulleys
- Craftsman Trimmer Springs and Shock Absorbers
- Craftsman Trimmer Starters
- Craftsman Trimmer Switches
- Craftsman Trimmer Transmissions and Clutches
- Craftsman Trimmer Wheels and Rollers
- Craftsman Trimmer Wire Plugs and Connectors