Craftsman Trimmer Gears

Your Price

$23.82

Craftsman Trimmer Sa Gear And Spindle, Serv Only

★★★★★

1 Review

PartSelect Number PS18994000

Manufacturer Part Number N498091

This is a Genuine OEM Sourced replacement part designed for Black and Decker String Trimmer. This item is used to secure and drive the Spool. It is made out of Plastic and Metal. Includes a Plastic Housing, Plastic Gear, Metal Bearing and Two (2) Metal Eyelets.

Fixes these symptoms

Cutting line does not come out
Engine revs but trimmer head will not turn
See more...

Installation Instructions

Mark from CATOOSA, OK

Bearings on motor armature were shot ... driver gear not turning driven gear.

Took off line guard and guide. Remove 1 Phillips screw.
Opened motor head. Remove 7 torx screws
Opened split housing using a small straight slot screw driver.
Removed gear from housing and pulled it out the bearing housing.

Opened split housing on trigger end. 8 torn screws.
Opened split case with flat screw driver.
Removed motor connections in trigger end for motor.

Pulled motor cable and motor from extention tube.

Please note tube orientation for easy reassemble.

Install new cable/motor on trigger end. Reinstall housing on trigger end.

Install new motor and gear head into new housing. Be sure to install old electrical brace stop to protect new cable.

Roll gear head to verify easy non-binding rotation.

Install top of split case for motor/head end.

Reinstall line guard and line guide.

Test with battery to proof the assembly Read more...

Your Price

$77.37

Craftsman Trimmer Gearbox Asm

PartSelect Number PS11812934

Manufacturer Part Number 753-06882

Upgrade your trimming toolkit with this Craftsman String Trimmer Head Kit, perfect for keeping your outdoor spaces neat and manicured. This robust Gearbox Assembly ensures that your trimmer operates smoothly and efficiently, enhancing your yard work routine. Designed to meet Craftsman's high standards, this kit delivers both durability and performance. Simplistic in installation, it's an ideal choice for amateurs and professionals alike who seek to maintain their trimmer's functionality. Get set to enjoy a stress-free trimming experience with this Craftsman String Trimmer Head Kit. Own it now for a spotless, well-kept outdoor space!

Videos!

Your Price

$62.27

Craftsman Trimmer Gearbox Assembly (includes 15-20)

★★★★★

3 Reviews

PartSelect Number PS9121308

Manufacturer Part Number 753-06165

This is a genuine OEM sourced replacement part designed to work with string trimmers. This part is attached to the lower boom assembly and it is what drives/spins the trimmer head. It is secured to the unit with two (2) screws. Internal gears or the gear box are not sold separately. This assembly includes the trimmer head. To complete this repair you will need a screwdriver.

Installation Instructions

Joshua from GLENPOOL, OK

Needed a new trimmer spool. Also had a little wobble at the neck of the gearbox.

Remove the smaller set screw that keeps the gearbox aligned on the shaft. Remove the two screws on the gearbox that are closest to the engine. You may have to loosen the other 4 screws,but they are not necessary to remove, as the new gearbox comes with those 4 screws in place. You can then slide the gearbox off the shaft. Clean all dirt and debris off the end of the shaft. Install the new gearbox the same way you removed the old one. Install the set screw to realign the gearbox on the shaft. Then install the two screws closest to the engine. Tighten all 7 screws on the gearbox and shaft accordingly. Start your engine and give her a go. Gearbox assembly comes pre-installed with trimmer line already so you're good to go. Read more...

Your Price

$24.41

Craftsman Trimmer Gearbox

PartSelect Number PS12602606

Manufacturer Part Number 530096068

This part has been sourced from the original manufacturer to ensure a high level of quality. The gearbox assembly is intended to be used with trimmers from Weed Eater and Poulan. This is a pre-assembled gearbox that includes all the gears, bearings, and linkages. This part is used to connect the lower drive shaft and the cutting head assembly and to allow the two parts to rotate in unison. This gearbox assembly is priced as a single item.