Craftsman Lawn Mower Wheels and Rollers
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Craftsman Lawn Mower Wheels and Rollers
Your Price
$12.69
In Stock
Craftsman Lawn Mower Wheel
HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
PartSelect Number PS12630280
Manufacturer Part Number 589527301
This genuine Craftsman hex gauge wheel is a replacement part sourced directly from the original manufacturer and is designed for use with riding lawn mowers. It attaches to the mower’s deck assembly and helps support the deck while providing traction, preventing it from making direct contact with the ground during operation. This helps maintain an even cut and protects both the deck and the lawn. The gauge wheel is sold individually, so be sure to check your model’s specifications to determine the quantity needed.
Installation Instructions
robert from EUREKA, CA
transaxle rotated forward on 2015 Husqvarna YT42DXLS
2015 Husqvarna YT42DXLS. Both transaxle support struts broke causing the transaxle rotated forward and shear transaxle mounting bracket. The transaxle was not damaged. All 3 parts required replacement. There are some good youtube videos to watch to show how to complete the repair. HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
Your Price
$35.94
In Stock
Craftsman Lawn Mower Wheel, 8 X 1.75, Mag2, Rad3, G
PartSelect Number PS16373269
Manufacturer Part Number 583719501
Facing issues with your GE Dryer's control console? Our GE Dryer Backsplash Panel Assembly is just the part you need to sort things out. You are probably asking what this part does. Well, it?s basically the 'brain' of your dryer. This is where the selection buttons and display are housed. The Backsplash Panel Assembly restores the optimal functioning of these key elements, helping your dryer work flawlessly, just like when it was new. Designed in a clean, crisp white finish, this part doesn't just work well?it looks great too, ensuring that your appliance maintains a sharp, coherent look. It also comes with detailed graphics, offering clear and easy-to-follow guidance. To guarantee a smooth and safe replacement process, remember to disconnect your dryer from the power before you begin. It's also a good idea to wear work gloves to ensure your hands are fully protected throughout. And you can trust the quality?this part reflects GE's commitment to offering durable and reliable products. Our Backsplash Panel Assembly is engineered for long-term use, ensuring that your dryer remains dependable for years to come. Note: While our GE Dryer Backsplash Panel Assembly is meticulously designed for a universal fit, we recommend verifying that it's compatible with your specific dryer model before purchasing. This way, we can best assure you will experience smooth sailing with your dryer upgrade. Trust us; your dryer will thank you for it!
Your Price
$21.16
In Stock
Craftsman Lawn Mower Wheel Assembly
PartSelect Number PS12604789
Manufacturer Part Number 532403111
Lawn mower wheel assembly, Diameter: 8 inches. Width: 1.75 inches. If the lawn mower's self-propel function isn't working, the drive gear on the wheel might be stripped.
Your Price
$38.50
In Stock
Craftsman Lawn Mower Wheel
PartSelect Number PS9016096
Manufacturer Part Number 532401274
This is a genuine Husqvarna replacement part, sold individually. Wheel 532401274 attaches to each side of the mower deck and propels the lawn mower. A wrench is required for replacement of this part. This part is compatible with the Husqvarna lawn mower models that are listed below.
Installation Instructions
Russ from ALTENBURG, MO
My self-propelled lawnmower did not function. The front wheel assist did not work.
I removed one of the wheels and noticed that the gear teeth were worn off. I then checked the other wheel and it was the same. I ordered two replacement wheels and replaced the worn wheels with the new wheels. It took less than 15 minutes to remove the old wheels and replace with the new wheels. It took a ratchet and a 9/16 inch socket. It was a very easy repair.
Read more...
Your Price
$52.66
In Stock
Craftsman Lawn Mower Axle Asm-rear 11
PartSelect Number PS16386134
Manufacturer Part Number 611-04144B
This authentic component is sourced directly from the original equipment manufacturer. It is specially designed for use with push lawn mowers. It is an identical replacement for a damaged or a missing rear axle assembly that was installed on a new unit. This is the part that the wheels are attached to. Refer to the diagrams of your model for the exact location and the correct installation of this component. Note, it is made of durable metal and is sold individually. You will need a wrench set and a screwdriver to remove the wheels, disconnect the old axle assembly and attach the new part.
Installation Instructions
Tim from SPOKANE VLY, WA
Broken adjustment lever
Placed on stands to hold mower up, then removed wheels and clips, then placed new axle in place and replaced clips and wheels.
Read more...
Your Price
$13.49
In Stock
Craftsman Lawn Mower Caster
PartSelect Number PS11867132
Manufacturer Part Number 29823
Genuine Ridgid replacement part, this item is sold individually. The purpose of the 29823 Caster it to make the Vacuums shown below more mobile. To replace the Caster , pull on it and remove it from the Caster Foot, then just simply press the new caster back in.
Your Price
$18.34
In Stock
Craftsman Lawn Mower Wheel Gage
PartSelect Number PS9010538
Manufacturer Part Number 532133957
This is a Genuine OEM replacement part used on Ride Mowers/Lawn Tractors. This is the Wheel that helps to support the Deck and allows it to move around easier. This Wheel is made out of Plastic and it is Sold Individually. Please note the Bolt and Nut used to secure this Wheel are Sold Separately. To replace this item you would need a Wrench.
Your Price
$43.36
In Stock
Craftsman Lawn Mower Axle Asm
PartSelect Number PS16386128
Manufacturer Part Number 611-04143B
This authentic component is sourced directly from the original equipment manufacturer. It is specially designed for use with push lawn mowers. It is an identical replacement for a damaged or a missing front axle assembly that was installed on a new unit. This is the part that front wheel are attached to. Refer to the diagrams of your model for the exact location and the correct installation of this component. Note, it is made of durable metal and is sold individually. You will need a wrench set and a screwdriver to remove the wheels, disconnect the old axle assembly and attach the new part.
Your Price
$51.35
In Stock
Craftsman Lawn Mower Wheel.12x1.75.mag2.rad3.gry.tb
PartSelect Number PS17016987
Manufacturer Part Number 532433121
This is a genuine item which is supplied directly from the original equipment manufacturer and is used on Craftsman Lawn mowers. The most common reason for replacing the rear wheel is if it does not turn, if it's worn out, or damaged, which can cause the mower to not cut evenly. This part is sold individually. You will need a socket set to replace the rear wheel.
Your Price
$57.42
In Stock
Craftsman Lawn Mower Wheel Assembly
PartSelect Number PS11812390
Manufacturer Part Number 634-05040
Enhance your equipment's functionality with this MTD Front Wheel. Rendered in a sophisticated black color, this component is designed with a unique Zag pattern for a sturdy grip. It is assured to bring longevity and enduring performance to your beloved equipment. The wheel assembly measures 8" x 2", making it a versatile fit for a vast range of MTD equipment. Manufactured by the trusted MTD brand, the commitment to quality and dependability is at the forefront. This is the perfect replacement part to ensure the smooth running of your valuable equipment.
Related Craftsman Lawn Mower Parts
- Craftsman Lawn Mower Bags
- Craftsman Lawn Mower Bearings
- Craftsman Lawn Mower Belts
- Craftsman Lawn Mower Blades
- Craftsman Lawn Mower Brackets and Flanges
- Craftsman Lawn Mower Brushes
- Craftsman Lawn Mower Caps and Lids
- Craftsman Lawn Mower Carburetors
- Craftsman Lawn Mower Circuit Boards and Touch Pads
- Craftsman Lawn Mower Control Cables
- Craftsman Lawn Mower Deflectors and Chutes
- Craftsman Lawn Mower Dipsticks
- Craftsman Lawn Mower Doors
- Craftsman Lawn Mower Engines
- Craftsman Lawn Mower Exhausts
- Craftsman Lawn Mower Fans and Blowers
- Craftsman Lawn Mower Filters
- Craftsman Lawn Mower Fuses
- Craftsman Lawn Mower Gears
- Craftsman Lawn Mower Grilles and Kickplates
- Craftsman Lawn Mower Handles
- Craftsman Lawn Mower Hardware
- Craftsman Lawn Mower Hinges
- Craftsman Lawn Mower Hoses and Tubes
- Craftsman Lawn Mower Ignitions
- Craftsman Lawn Mower Knobs
- Craftsman Lawn Mower Latches
- Craftsman Lawn Mower Legs and Feet
- Craftsman Lawn Mower Lights and Bulbs
- Craftsman Lawn Mower Manuals and Literatures
- Craftsman Lawn Mower Motors
- Craftsman Lawn Mower Panels
- Craftsman Lawn Mower Pedals
- Craftsman Lawn Mower Pulleys
- Craftsman Lawn Mower Pumps
- Craftsman Lawn Mower Seals and Gaskets
- Craftsman Lawn Mower Seats
- Craftsman Lawn Mower Spark Plugs
- Craftsman Lawn Mower Spindles
- Craftsman Lawn Mower Springs and Shock Absorbers
- Craftsman Lawn Mower Starters
- Craftsman Lawn Mower Switches
- Craftsman Lawn Mower Tanks and Containers
- Craftsman Lawn Mower Transmissions and Clutches
- Craftsman Lawn Mower Trays and Shelves
- Craftsman Lawn Mower Trims
- Craftsman Lawn Mower Valves
- Craftsman Lawn Mower Wire Plugs and Connectors