Craftsman Lawn Mower Belts

Your Price

$35.94

Craftsman Lawn Mower Belt

★★★★★

1 Review

PartSelect Number PS16380739

Manufacturer Part Number 592855201

This is a genuine OEM replacement part, sold individually. V-belt drive systems, also called friction drives (because power is transmitted as a result of the belt\'s adherence to the pulley) transmit power from a drive to a driven shaft. They are easy to install, require no lubrication, and dampen shock load. It is compatible with the mowers and lawn tractors listed below.

Fixes these symptoms

Drive system does not work
See more...

Installation Instructions

Lynn from BOILING SPGS, PA

Drive belt came off from transaxle pulley, noticed in bad shape, ordered new one form parts select.

The drive belt literally goes from the back of the tractor to the front. The mower must be removed, helps to have the tractor up on blocks to give adequate room for work on underside. Belt goes easiest on the engine first, then thread to the rear, install on the rear, (driven pulley) then on the idlers. Check to assure that it functions properly before re-installing the mower. If you have the owners manual, there is a diagram, (check your orientation, it is not clear if it is a birdseye or under tractor view) which offered some help. When replacing belt, check the transaxle front mount, mine was broken which is why the belt came off in the first place. Repairing the mount was quite a job in itself, but now works fine. Read more...

Your Price

$68.86

Craftsman Lawn Mower V-belt

PartSelect Number PS9982769

Manufacturer Part Number 584453101

This is an OEM part sourced directly from the manufacturer. The belt is designed for use in Craftsman lawn tractors and riding mowers. This part is made of flexible rubber, and is used in conjunction with the pulley assemblies to transfer power from the engine to the mower blades. Over time, it may become brittle and cracked, requiring replacement. You may need a wrench when replacing this part. This item is sold individually

Fixes these symptoms

Deck blades will not turn
See more...

Your Price

$58.42

Craftsman Lawn Mower V-belt

PartSelect Number PS11813755

Manufacturer Part Number 954-04060C

This is a Genuine Manufacturer Approved replacement V-Belt used on Riding Lawn Mowers. This part is made out of Rubber and it is sold individually. This is the Belt that drives the Blades. Clean the pulleys off before installing the new belt to ensure top performance and longevity with your new belt. Inspect belts periodically and replace them when worn to maintain peak performance.

Your Price

$62.60

Craftsman Lawn Mower Belt

PartSelect Number PS17016841

Manufacturer Part Number 598559101

This Genuine OEM drive belt is a manufacturer-sourced component designed for use with select Craftsman riding lawn mowers and garden tractors. Made from high-quality, durable rubber and sold individually, this belt serves as a direct replacement for a worn or missing original part. It plays a critical role in the mower’s operation by transferring power to rotate the blades, ensuring consistent cutting performance. Over time, belts can wear, crack, or stretch, leading to reduced efficiency or complete failure. Replacing the drive belt restores proper function and helps maintain the longevity of your equipment. For accurate installation and compatibility, please consult your model’s owner’s manual and parts diagram to verify the correct location and application of this component.

Installation Instructions

Steve from DAMASCUS, OR

Mower belt fell off was cut by the drive pulley.

Got the proper length and pulley size belt via serial number. Checked the length prior to ordering to assure the length would be correct.
Took mower onto a flat surface where I could get on both sides of the deck. And then placed the belt on the back pulleys first . Then I routed it through the idler pulleys to the power pulley where I turned the pulley with putting finger pressure against the belt as I turned the pulley. And it went on with no problem . It is that simple just be sure to turn the pulley and apply the belt in the same direction at the same time. Read more...

Your Price

$48.79

Craftsman Lawn Mower V-belt

PartSelect Number PS9011522

Manufacturer Part Number 532144959

This is a genuine replacement belt sourced directly from the original manufacturer, designed for use with riding lawn tractors and mowers. Made from durable rubber and sold individually, this belt is responsible for driving the mower blades, making it a critical component for cutting performance. To ensure optimal function and longevity, it’s important to clean the pulleys before installing the new belt and to inspect the belt regularly for signs of wear or stretching. Replacing the belt requires a wrench set and pliers. For safety, always disconnect the spark plug wire before beginning. Start by lowering the mower deck to its lowest position and setting the blade engagement lever to the "Off" position. Roll the old belt off the engine pulley from between the belt guide and pulley. Remove the mower deck by taking out the bow-tie pins securing the left and right lift arms, then disconnect the blade engagement cable. Next, remove the bolts from the mower deck belt pulley covers and take off the covers. Loosen, but do not remove, the nuts on the top of the idler pulleys. Install the new mower deck belt through the belt guides and around the pulleys, then tighten the idler pulley nuts. Finally, reassemble the deck to complete the repair and restore your mower’s cutting performance. Lawn mower deck belt. Width: 1/2 " Length: 95 1/2 ".

Your Price

$58.42

Craftsman Lawn Mower Variable-speed Belt

PartSelect Number PS9186148

Manufacturer Part Number 954-0467A

This is a Genuine replacement Belt designed for use with Riding Lawn Tractors/Mowers. This part is made out of Rubber and it is Sold Individually. This is the the Belt that drives your unit. Make sure to clean pulleys before installing the new belt to ensure top performance and longevity with your new belt. Inspect belt periodically and replace it when worn or stretched to maintain peak performance. You would need a Wrench set and Pliers to replace this belt. • For your safety make sure to disconnect the spark plug wire. • Loosen the transaxle pulley • Relieve tension on the upper drive belt • Remove the upper drive belt and lawn mower belt guide • Secure the new belt • Reassemble and tighten the pulleys

Your Price

$75.13

Craftsman Lawn Mower Drive Belt

PartSelect Number PS11824864

Manufacturer Part Number 587686701

This drive belt 54 is a genuine manufacturer sourced replacement part. This is the main deck belt that rotates the blades on riding lawn mowers/tractors. Over time this belt will stretch and wear out, eventually breaking. Check on the belt periodically and replace it when needed to maintain top performance. Please note, this includes one (1) rubber belt per order. To replace this drive belt you will need a set of wrenches and pliers. • Disconnect the spark plug wire • Lower the mower deck to the lowest position • Move the blade engagement lever to the Off position • Roll the belt off the engine pulley from between the belt guide and pulley • Remove the bow-tie pins securing the left and right lift arms to the mower deck • Remove the bow-tie pin from the front suspension arm • Turn the front wheels to the left for easier access • Raise the mower deck lift lever to the highest position • Slide the mower deck to the left and disconnect the blade engagement cable • Carefully slide the mower deck out from under the right side of the riding lawn mower • Remove the bolts from the mower deck belt pulley covers and pull the covers off • Loosen but don't remove the nuts on the top of the idler pulleys • Install the new mower deck belt • Reassemble and test the mower

Installation Instructions

MATTHEW from PENNSBURG, PA

Right axle bent

Replacing belt with no problem. I've ordered the front right axle spindle assembly three times. This is from your parts list and you sent me the part and they did not work at all. Read more...

Your Price

$75.13

Craftsman Lawn Mower Belt Drive Deck

PartSelect Number PS17016487

Manufacturer Part Number 593773401

This is a genuine replacement belt sourced from the original manufacturer, designed for use with riding lawn mowers and tractors. Made from durable rubber and sold individually, this belt is responsible for driving the mower blades, making it a key component for effective cutting performance. To ensure optimal operation and extend the life of the belt, it’s important to clean the pulleys before installation. Regular inspection is recommended, and the belt should be replaced if it becomes worn or stretched. A set of wrenches is required to complete the installation.

Your Price

$48.79

Craftsman Lawn Mower Belt

PartSelect Number PS16380736

Manufacturer Part Number 592855001

This is a genuine OEM supplied belt which is designed for use with Husqvarna, Jonsered and Poulan riding lawn mowers and garden tractors. It is the main belt for the deck that drives the blades. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement. One durable rubber v-belt is included. A wrench set might be needed to perform this repair. Check the owner's manual for your model to ensure the correct replacement procedure.

Your Price

$32.55

Craftsman Lawn Mower Ground Drive Belt

★★★★★

1 Review

PartSelect Number PS9172714

Manufacturer Part Number 954-04032B

This genuine drive belt is an original replacement part sourced directly from the manufacturer and is commonly used in Craftsman lawn mowers and edgers. Made from flexible rubber, it transfers power from the engine to the pulley that drives the cutting blades. Over time, the belt may become brittle or cracked due to wear and exposure, requiring replacement to maintain optimal performance. Measuring 3L x 35.80 inches, this belt is sold individually. A wrench may be needed for installation, depending on your equipment model.

Shop by Department

Top Appliance Brands

Top Lawn Equipment Brands

Popular Craftsman Lawn Mower Belts

Related Craftsman Lawn Mower Parts

Shop by Department

Top Appliance Brands

Top Lawn Equipment Brands

Sample Model Number Tags

EasyApplianceParts is Now PartSelect!

Craftsman Lawn Mower Belts

Find Your Part

Popular Craftsman Lawn Mower Belts

Related Craftsman Lawn Mower Parts