Craftsman Chainsaw Springs and Shock Absorbers
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Craftsman Chainsaw Springs and Shock Absorbers
Your Price
$7.64
In Stock
Craftsman Chainsaw Spring Hub Eps
PartSelect Number PS18530023
Manufacturer Part Number 581481601
Genuine Manufacturer Approved replacement part used on specific Poulan Gas Chainsaws. This item is made out of Metal and it is Sold Individually. This part plays an important role as it provides spring action in the Pull Starter.
Installation Instructions
Joel from West Roxbury, MA
Pull cord failed to retract
Removed cowling and spool. Spring drops in place without need for adjustment.
Read more...
Your Price
$6.40
In Stock
Your Price
$6.40
In Stock
Craftsman Chainsaw Spring
PartSelect Number PS12602339
Manufacturer Part Number 530057908
This is an authentic Poulan replacement part manufactured for use with gas powered chainsaws. The ignition switch spring is used to put tension on the throttle control lever. This ignition switch spring is sold as an individual replacement part, please see model diagram for associative parts.
Your Price
$6.40
On Order
Craftsman Chainsaw Spring
PartSelect Number PS9005956
Manufacturer Part Number 530021180
This replacement part is sourced from the original equipment manufacturer. It is specially designed for use with Poulan, Husqvarna and Jonsered chainsaws. The spring is an important component of the starter mechanism. It applies tension on the pulley allowing it to retract. Unfortunately, over time it may wear out, get damaged or lost eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. This high-quality spring is made of durable metal and is sold individually. You will need a screwdriver to take apart the starter housing in order to perform this repair.
Your Price
$7.64
In Stock
Craftsman Chainsaw Spring
PartSelect Number PS9029515
Manufacturer Part Number 537359101
This is a genuine OEM sourced component which is designed for use with Husqvarna chainsaws. This is one of the special springs for the clutch. It is an identical replacement for a missing or a faulty item that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this spring. Keep in mind this high-quality part is made of durable metal and is sold individually.
Your Price
$9.23
Special Order
Craftsman Chainsaw Spring
PartSelect Number PS9289230
Manufacturer Part Number 545008015
This is a genuine OEM approved starter spring which is specially designed for use with handheld lawn and garden equipment. It is an identical replacement for a missing or a faulty component that was installed on a new unit. The purpose of this spring is to retract the starter assembly on the engine, so it engages the drive cup on the flywheel to start the engine when pulled. This high-quality spring is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams of your model for the correct location and application of this item.
Your Price
$6.74
In Stock
Craftsman Chainsaw Lock Spring
PartSelect Number PS8990103
Manufacturer Part Number 503436501
This is a genuine manufacturer-sourced replacement part which is specially designed for Husqvarna, Poulan and Jonsered chainsaws. The purpose of this spring is to apply tension on the catch which is sold separately. If the hardware is worn or damaged, this will provide an identical replacement for the original component that was installed on a new unit. Refer to the appropriate diagrams for your model to ensure the exact location and the correct repair procedure. Note, this high-quality lock spring is made of durable metal and is sold individually.
Your Price
$7.63
In Stock
Craftsman Chainsaw Spring
PartSelect Number PS16368090
Manufacturer Part Number 576657801
This part is an OEM from Craftsman for use with Chainsaws. The recoil starter hub spring fits between and connects the starter hub and pulley, and applies tension to turn the starter. The most common reasons for replacing the spring start is if the starter rope won't recoil or rewind after pulling or the starter rope won't retract fully back into the housing. This part is sold individually. Here is a list of tools that are needed to replace the recoil starter hub spring a Phillip's screwdriver, Torx drivers, long-nosed pliers, scissors or wire cutters (optional), safety glasses and protective gloves.
Your Price
$6.40
On Order
Your Price
$7.23
In Stock
Craftsman Chainsaw Spring
PartSelect Number PS12637453
Manufacturer Part Number 530059479
This is available as an individual replacement part. The spring attaches to the front handle and is made of a durable material. A screwdriver, a set of pliers, and a socket set may be necessary during the installation of this item. It may become broken and will need to be replaced. This is an OEM part sourced directly from the manufacturer and used in chain saws made by Poulan.
Related Craftsman Chainsaw Parts
- Craftsman Chainsaw Bearings
- Craftsman Chainsaw Brackets and Flanges
- Craftsman Chainsaw Caps and Lids
- Craftsman Chainsaw Carburetors
- Craftsman Chainsaw Ducts and Vents
- Craftsman Chainsaw Filters
- Craftsman Chainsaw Handles
- Craftsman Chainsaw Hardware
- Craftsman Chainsaw Hoses and Tubes
- Craftsman Chainsaw Knobs
- Craftsman Chainsaw Latches
- Craftsman Chainsaw Motors
- Craftsman Chainsaw Pumps
- Craftsman Chainsaw Seals and Gaskets
- Craftsman Chainsaw Starters
- Craftsman Chainsaw Switches
- Craftsman Chainsaw Transmissions and Clutches
- Craftsman Chainsaw Valves
- Craftsman Chainsaw Wheels and Rollers
- Craftsman Chainsaw Wire Plugs and Connectors