Craftsman Chainsaw Transmissions and Clutches

Craftsman Chainsaw Drive Sprocket

★★★★★

★★★★★

1 Review

This drive sprocket in your chainsaw is responsible for transferring power from the engine to the cutting chain, allowing it to rotate and cut through material. Located on the output shaft, the drive sprocket is connected to the chain mechanism. If you notice signs of wear or damage, such as a loose or misaligned sprocket, it is time for a replacement. To replace the sprocket, begin by removing the battery, chain cover, chain, and bar. Then, remove the left-handed bolt, move the chain brake, and carefully pull out the old sprocket. Install the new sprocket with the necessary washers for proper alignment and reduced chain movement. Finally, reassemble the remaining parts, ensuring that the bolt tightens counterclockwise. Please note that this OEM replacement part is sold individually.

Craftsman Chainsaw Assembly Clutch Drum 3/8

★★★★★

★★★★★

2 Reviews

This is an authentic OEM sourced part which is specially made for Craftsman chainsaws. A centrifugal clutch is a part that uses centrifugal force to connect two concentric shafts, with the driving shaft nested inside the driven shaft. Today's centrifugal clutches will function even when they shouldn't, far beyond the point of when they need to be replaced. Keeping an eye on equipment performance will determine when the centrifugal clutch requires attention. It is a high-quality clutch drum which is made of durable metal and is sold individually. Please note, the <a href="http://www.ereplacementparts.com/clutch-p-1099174.html" target=blank><u>#530057907 Clutch </u></a> is sold separately.

Craftsman Chainsaw Clutch Drum Assembly This is an original Husqvarna replacement part, manufactured for use with chainsaws. The clutch drum includes the sprocket as one piece, the sprocket drives the chain. Chainsaw sprockets wear out from normal use, a worn sprocket can cause the chain to slip or cease to spin. This clutch drum assembly also includes the needle bearing, and the assembly is sold individually.

Craftsman Chainsaw Brake Band Assembly This is an authentic manufacturer-sourced part that is specially designed for use with Husqvarna chainsaws. It is an identical replacement for a faulty or a missing brake band assembly that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. The band is a part of a chain-break mechanism that plays an important role on safe operation of the chainsaw. Keep in mind this high-quality item is made of durable metal and is sold individually.

Craftsman Chainsaw Clutch Drum This item has been sourced from the original manufacturer to ensure quality. The metal clutch drum is intended to be used with chainsaws from Husqvarna and Jonsered. This item is used to house the clutch and to drive the chain. The clutch expands when the saw\\\'s engine increases RPMs and this rotates the clutch drum and the sprocket catches the chain to rotate it around the bar. This item is available as an individual replacement part.

Craftsman Chainsaw Clutch This is a Genuine OEM replacement part used on Poulan Gas Chainsaws. This item is made out of Metal and it is Sold Individually. A centrifugal clutch is a part that uses centrifugal force to connect two concentric shafts, with the driving shaft nested inside the driven shaft. Today's centrifugal clutches will function even when they shouldn't, far beyond the point of when they need to be replaced. Keeping an eye on equipment performance will determine when the centrifugal clutch requires attention. Please note Clutch Drums is Sold Separately. To replace this item you would need a Wrench and Pliers.

Craftsman Chainsaw Clutch Drum This is a genuine OEM sourced component which is specially made for Poulan and Husqvarna chainsaws. The are two functions of the clutch drum assembly. It encases the clutch and when the engine gets up to a certain speed the clutch will engage the drum assembly. The sprocket which is part of the drum assembly is the part that drives the chain. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality clutch drum and gear assembly is made of durable metal and is sold individually. NOTE: We do have an article that covers chain measurements, sizes and types. Here is the link. <u><a href="http://www.ereplacementparts.com/article/1507/Chainsaw_Chain_Measurements_Sizes_and_Types.html">Chainsaw Chain Measurements, Sizes, and Types </u></a>

Craftsman Chainsaw Sprocket

Craftsman Chainsaw Clutch Drum Assembly

★★★★★

★★★★★

1 Review

This is an OEM sourced replacement part used on Poulan chainsaws. A centrifugal clutch uses centrifugal force to connect two concentric shafts, with the driving shaft nested inside the driven shaft. Often centrifugal clutches will function even when they shouldn't, far beyond the point of when they need to be replaced. Keeping an eye on equipment performance will determine when the clutch requires attention. This assembly includes metal clutch drum and a sprocket. To replace this item you would need a wrench set. • Remove the chain brake, bar, and chain. • Remove the cover and spark plug. • Bind the piston. (If you skip this step, the clutch will spin freely and you won't be able to remove it. If you have a piston stopper, just thread it into the spark plug hole. ) • Remove the clutch. • Replace old drum with a new assembly • Seat the clutch. • Unbind the piston. • Secure the bar, chain, and chain brake. • Tension the chain

Craftsman Chainsaw Clutch Band Kit

★★★★★

★★★★★

1 Review

This is an OEM part sourced directly from the manufacturer. The chain brake kit is designed for use in Craftsman chainsaws. This part is made of metal and high-quality plastic, and is used to halt the motion of the chain. You may require a screwdriver or Allen wrench when replacing this part. This item is sold individually.