Craftsman Chainsaw Caps and Lids
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Craftsman Chainsaw Caps and Lids
Your Price
$11.24
In Stock
Craftsman Chainsaw Fuel Cap
Instead of running the line into the tank, I found another suggestion online to run the line from inside the tank outward, allowing me to grab the line with any pliers and thread it. The way I did this was used about a foot length of 14 gauge copper wire. Put an inch or two into the hose (that has been cut on an angle), and use a little black tape to secure the hose on the wire. Now you should be able to route the stiff wire from inside the tank to the fuel hole in the tank. Fish the wire through, and it should be enough to get the tapered end through the tank. Pull the copper wire, mine came out, but there was enough of the hose exposed on the outside of the tank for me to grab with pliers and pull it through. Read more...
PartSelect Number PS12660507
Manufacturer Part Number 580940901
This part is the replacement fuel cap assembly for your chainsaw. It is made of black plastic and is sold individually. The fuel cap prevents fuel from spilling out of the chainsaw and prevents debris from entering the fuel tank. If the fuel cap is stripped or missing the O-ring, it can cause a leak, and will need to be replaced. To replace the fuel cap simply screw the old one out and screw the new one in, ensuring you have a tight seal. This is an authentic OEM part sourced directly from the manufacturer.
Installation Instructions
Robert from MANVILLE, NJ
Replace the fuel lines
Replaced all fuel lines. Followed instructions found on Partselect.com, which said to insert cut fuel line in tank and use forceps to reach back in the tank and pull the fuel line through. The problem was that I did not have forceps, or needle nosed pliers that could reach the end of the hose. Instead of running the line into the tank, I found another suggestion online to run the line from inside the tank outward, allowing me to grab the line with any pliers and thread it. The way I did this was used about a foot length of 14 gauge copper wire. Put an inch or two into the hose (that has been cut on an angle), and use a little black tape to secure the hose on the wire. Now you should be able to route the stiff wire from inside the tank to the fuel hole in the tank. Fish the wire through, and it should be enough to get the tapered end through the tank. Pull the copper wire, mine came out, but there was enough of the hose exposed on the outside of the tank for me to grab with pliers and pull it through. Read more...
Your Price
$12.81
In Stock
Craftsman Chainsaw Fuel Cap
PartSelect Number PS9005717
Manufacturer Part Number 530014347
The Fuel Cap with retainer, often simply known just as the fuel cap, keeps fuel from splashing out of your tank and debris from entering it. Black in color, it is sold individually and made of plastic.
Because of everyday fatigue and wear, the cap can become damaged over time and must be replaced. You will know if it is time to replace your fuel cap if you notice visible damage or experience fuel leaking from it. You can make this repair by hand, just attach the cap directly back onto the fuel tank.
Most of our customers found this repair very easy.
Your Price
$8.27
In Stock
Craftsman Chainsaw Oil Cap Asm
PartSelect Number PS12687187
Manufacturer Part Number 953-08222
This oil cap assembly is used on chainsaws to securely seal the bar-and-chain oil tank. It prevents oil leaks and keeps dirt or debris from contaminating the lubrication system, helping ensure proper chain lubrication during operation. This is a direct replacement for a lost, cracked, or leaking oil cap to restore reliable lubrication and safe chainsaw performance.
Your Price
$14.43
In Stock
Craftsman Chainsaw Fuel Cap Assembly
PartSelect Number PS12606764
Manufacturer Part Number 577858601
The Fuel Cap Asssembly attaches on top off the fuel tank in order to prevent fuel from exiting, or debris from entering. Installation is rated as "Easy" by customers. If broken due to fatigue/wear/damage, you may notice a fuel leak or the smell of fuel, and the part should be replaced. Refer to your make, model and diagram to ensure this is the correct part. This part is plastic, and comes individually sold.
Your Price
$14.43
In Stock
Craftsman Chainsaw Oil Cap
PartSelect Number PS8985457
Manufacturer Part Number 501765602
This is a genuine OEM approved replacement part for use with Husqvarna chainsaws. It is designed to keep the fuel/oil in the tank. It includes a retainer that remains in the tank to keep the fuel cap from being lost or falling on the ground. It is made out of plastic and it is sold individually.
Your Price
$3.14
Special Order
Craftsman Chainsaw Hand Guard
PartSelect Number PS16374142
Manufacturer Part Number 585600501
This hand guard is an OEM replacement sourced directly from the manufacturer. It is compatible with over thirty models of Poulan chainsaws. This hand guard will engage the chain brake if pushed forward. It also protects the operator's hand from the chain and bar. This part is made of plastic and should be replaced if it is damaged. It is recommended to wear work gloves while replacing this part.
Your Price
$9.62
In Stock
Craftsman Chainsaw Chain Catcher
PartSelect Number PS9004067
Manufacturer Part Number 530029850
This is a genuine manufacturer approved replacement part designed for use with chainsaws. This part is an important safety feature because it prevents the chainsaw chain from flying off the bar if it breaks or comes loose from its track. It is made out of metal and it is sold individually. Please note the screw used to secure it is sold separately.
Your Price
$9.69
In Stock
Craftsman Chainsaw Tank Cap Assembly
PartSelect Number PS11823906
Manufacturer Part Number 544111203
This tank cap assembly is a genuine replacement part supplied directly from Husqvarna. It is compatible with many models of chainsaws. This assembly includes the cap and the holder (part 503578901). The cap is designed to keep fuel inside the tank, as well as prevent outside contaminants from entering the tank. The holder connects the cap to the tank. This assembly should be replaced if either part is damaged.
Your Price
$16.03
In Stock
Craftsman Chainsaw Air Filter-felt
PartSelect Number PS9029682
Manufacturer Part Number 544080803
This felt air filter is a genuine replacement part designed for use with chainsaws. Built to capture dust, dirt, and other fine particles, it ensures clean airflow to the engine, helping maintain strong performance and reducing unnecessary wear. By keeping debris out, this filter plays a crucial role in prolonging the life of your equipment while supporting efficient operation.
Your Price
$8.01
On Order
Craftsman Chainsaw Chain Guide
PartSelect Number PS9026939
Manufacturer Part Number 540063301
This chain guide is an OEM part direct from Husqvarna. The plastic guide is fitted onto the chainsaw clutch cover assembly, and is sold individually. This component assists with protecting and helping the chain to cut in a straight line. A screwdriver and a wrench set is often needed for making the replacement.
Related Craftsman Chainsaw Parts
- Craftsman Chainsaw Bearings
- Craftsman Chainsaw Brackets and Flanges
- Craftsman Chainsaw Carburetors
- Craftsman Chainsaw Ducts and Vents
- Craftsman Chainsaw Filters
- Craftsman Chainsaw Handles
- Craftsman Chainsaw Hardware
- Craftsman Chainsaw Hoses and Tubes
- Craftsman Chainsaw Knobs
- Craftsman Chainsaw Latches
- Craftsman Chainsaw Motors
- Craftsman Chainsaw Pumps
- Craftsman Chainsaw Seals and Gaskets
- Craftsman Chainsaw Springs and Shock Absorbers
- Craftsman Chainsaw Starters
- Craftsman Chainsaw Switches
- Craftsman Chainsaw Transmissions and Clutches
- Craftsman Chainsaw Valves
- Craftsman Chainsaw Wheels and Rollers
- Craftsman Chainsaw Wire Plugs and Connectors